Automotive Test Systems
HORIBA continues to accumulate substantial knowledge in designing and manufacturing high-quality chassis dynamometers for the automotive industry in compliance with existing and forthcoming emission standards. Continuous optimization and improvement of the tried-and-tested design have led to the latest generation of VULCAN dynamometers.
The AeroComp Series is a Compact Wind Tunnel Balance System based on three standard sizes developed for research and development in small wind tunnels with a test cross-section from 0,7m up to 2m.
HORIBA is a provider of Total Testing Solutions (TTS) for customers requiring a turn key solution for combustion & eletrical engine, driveline and powertrain test beds. One posibility of building turn key test benches is to...
「どら猫」シリーズのコンパクトな使いやすさはそのままに、ドライブレコーダーとしての機能と、運行管理のための拡張性を強化しました。二重トリガや音声録音にも対応。万一の常時電源断時にも映像を残します。
All-Wheel-Driven Powertrain test bed, used for testing transmission and driveline with or without combustion engine in longitudinal (in-line) configuration.
Front Wheel Driven Powertrain test bed, used for testing transmission and driveline with combustion engine or electrical drive system in longitudinal (in-line) or transversal configuration.
Rear Wheel Driven Powertrain test bed, used for testing transmission and driveline with or without combustion engine in longitudinal (in-line) configuration with or without rear axle and differential gearbox.
HORIBA hydraulic dynamometers are equipped with one or two rotors. The sloping vanes in the stator and the rotor enable high torque to be absorbed in one direction of rotation. Their field of
application is mainly in the testing of Diesel engines.
Over the last few years, the HORIBA Dynas3 range has developed into the leading system in dynamic engine testing.
DYNAS 3 HD is a range of electrical AC machines specially designed for the field of heavy duty engine testing.
The HORIBA DYNAS series covers the major of engine and driveline testing areas for stationary, transient and dynamic applications. The new HORIBA DYNAS3 HIGH PERFORMANCE class is a significant extension of the well proven DYNAS product portfolio.
DYNAS 3 HT is a range of electrical AC machines designed to provide the higher levels of torque required for modern diesel engines.
DYNAS3 LI is a range of absorbing and motoring machines for all test applications in the field of spark ignition engines. Low moments of inertia and high overload capacity together with speed gradients above 12.000 rpm/s guarantee a highly dynamic response.
FACT 220 is a testing device for automatic verification of the calibration of the sensors installed in the FQ-2100DP system.
The combination of a Fuel Flow Measuring Unit and a Fuel Temperature Control Unit provide the most accurate, stable and timely data available for your unit under test.
The World’s smallest Device in its class for the simultaneous measurement of multiple components of engine exhaust gas.
The FQ-2200CR Fuel Consumption Measurement System allows measuring fuel mass flow rate continuously
The FQ-3100DP fuel flow measurement system offers a highly precise method of measuring various fuel types for engines of up to 700 kW.
The HORIBA Wind Tunnel Balance is a platform-type balance. A computer program is used to calculate the forces Fx (Longitudinal-Force), Fy (Lateral-Force), Fz (Vertical-Force) and the three moments Mx (Roll-Moment), My (Pitch-Moment), Mz (Yaw-Moment) from the six force sensor signals.
The GIANT 6000 is a multi-purpose, full-size, inertia-brake dynamometer system mounted in a single unit.
The GIANT 8000 series is a full size NVH test system providing you with the best testing conditions for full size cars or light trucks.
The GIANT 9000 chassis type brake dynamometer serves for dynamic testing of complete vehicle brakes.
The GIANT Evo NVH is the largest dynamometer within the GIANT Evo family. It is a full-size NVH inertia brake dynamometer for basic and advanced NVH testing. The GIANT Evo NVH offers a whole range of functionalities for realistic and fully automatic NVH investigations. Due to its various optional features it is able to meet special customer requirements also for sophisticated NVH investigation.
The GIANT Evo NVH Pure is the squeal rig dynamometer within the GIANT Evo Family. It is a NVH inertia brake dynamometer for basic and advanced NVH testing. The GIANT Evo NVH Pure is designed to fit to a customer specific test chamber. Likewise testing station and core module can be mounted in separate rooms of a building.
The GIANT Evo Performance is the most compact inertia dynamometer within the GIANT family. It is optimized for basic investigations and performance tests of brake systems such as friction-mapping, function & wear tests as well as DTV & residual drag torque tests.
The GIANT Evo Universal is a very flexible inertia brake dynamometer optimized for both performance tests and for fundamental NVH investigations of brake systems. Due to the wide range of optional features to expand its testing capability the GIANT Evo Universal is able to cover the most testing procedures
The following list of options shows the variety of additional supplements to the GIANT series
The MCU Multiplexer is a client/server application that manages simultaneous access of several Test Automation Systems (TAS) and a MCU (MEXA Main Control Unit).
HORIBA MEDAS is a altitude simulator that meets all of today’s market demands. It is extremely dynamic, highly accurate, and offers simulation options for Road-to-Rig and test cell level verification for RDE-related topics and...
For laboratories with several test cells, MEXA GATEWAY provides the automation system with a uniform and stable view on integrated devices that are moved between test cells.
Long recognized as the world's premier emissions test equipment experts, HORIBA now offers an expanded line of analyzation options--allowing you to choose only the standalone analyzers you need to accommodate your specific integration and application needs.
One of the newest additions to the HORIBA stand alone analyzer product family is the MEXA-1170HCLD, which uses an industry standard chemiluminescence detector for NO/NOx measurement.
The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure concentrations of SO2and total reduced sulfur compounds (TRS), such as H2s, separately. It can also measure the total sulfur compounds (TS) that contain both gaseous compounds and liquid compounds in PM, such as SO3. "Lubricant oil consumption" measurement using sulfur trace method is also available.
Perfect for engine inspection and tuning, the MEXA-584 L portable gas analyzer complies with international standard OIML class O and is loaded with features to make analysis easy and accurate.
新規制に基づくオパシメータ(光透過式スモークメータ)による粒子状物質検査(PM検査)に対応。従来の光反射式黒煙測定器に比べて測定精度や再現性に優れ、低濃度スモークまでより正確に測定可能
The MEXA-ONE-FT Series simultaneously measures concentrations of multiple components, including NH3, N2O, CH4, CO and CO2.
The MEXA-ONE-QL-NX is an analyzer for the direct, simultaneous real-time measurement of the four relevant nitrogen-containing exhaust gas components NO, NO2, N2O and NH3.
The HORIBA Wind Tunnel Balance system can also be used for other test objects such as aircraft models, ship models, motor bikes and others.
Used for the direct measurement of engine exhaust gas flow rate on engine and chassis dynamometer test systems.
HORIBA carries out refurbishments, updates and modifications of existing balances and wind tunnels.
SGD-A10 and SGD-710C provide convenient and cost-efficient calibration of automotive-emission analyzers by reducing the amount of gas cylinders needed for calibration down to two.
The HORIBA MEXA-2100SPCS measures the number of solid particles directly from engine exhaust gas.
The Span Gas Manager provides the possibility to maintain the concentrations of span gases centrally in a database.
The new SPARC Engine is the state-of-the-art test stand controller for automotive, marine and aerospace engine testing.
SPARC Brake is a digital controller optimized for Inertia Brake Dynamometers. As a member of the SPARC family of universal controllers, SPARC Brake is using a modular design to enable more flexible configurations to fulfill any specific test environment.
Suitable for all types of HORIBA brake Inertia Dynamometers
The STARS Platform is an integrated automation, acquisition and control system that provides a broad range of application functionality in a single, powerful environment. Gathering this functionality together for the user greatly enhances the productivity and quality of testing related activities.
The HORIBA STARS Brake Application Suites consist of ‘ready-to-go’ test procedures according to the relevant brake test specifications. The suites include any STARS resource which is required to run the test immediately.
STARS Driveline is an integrated automation, acquisition and control system that provides a broad range of application functionality in a single, powerful environment.
STARS was developed by the world class combination of HORIBA and Ricardo. STARS is a powerful, flexible and versatile enterprise product, integrating with your testing process, meeting all of your testing needs, and has features for all applications in the engine testing environment from test bed control through to complete data management and reporting.
STARS HDEET is a powerful package of tools, tests, analysis and reporting that fulfills the requirements of Heavy Duty Engine Emissions Testing.
STARS MATS is the new HORIBA Mileage Accumulation Test Application based on the STARS Automation Platform. It provides integration, control, and management of equipment and functions to perform long term tests, including durability, validation, and aging on a chassis dynamometer.
STARS VETS offers excellent usability, flexibility and transparency.
The TITAN D Series extends the transient test opportunities to real dynamic test applications.
The TITAN S series is designed to test a wide range of gasoline and diesel engines ranging from ordinary passenger cars up to large truck engines.
The design of the TITAN T Series is optimised for testing light and heavy-duty gasoline and diesel engines.
VETS ONE automates a huge number of emissions chassis test cells worldwide, meeting the needs of independent test laboratories, automotive manufacturers, component suppliers, and regulatory agencies.
PC-based automation for managing chassis-emissions test cells.
The HORIBA 6-Component wind tunnel balance system provides the ability to measure the aerodynamic components drag, side force, lift force, rolling moment, pitch moment and yawing moment efficiently and with the highest accuracy.
WT Dyno - Eddy-current dynamometers are used as brakes in engine testing