Application
EMIA-Expert Carbon/Sulfur Analyzer
Overview
High Performance Model: EMIA-Expert
For expert analyst demanding the greatest accuracy and precision
The EMIA-Expert Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.
Advanced functions for EMIA-Expert
EMIA-Expert has advanced functions to realize high performance analysis in addition to standard functions of EMIA-Pro.
High Performance Purifier Unit for Carrier Gas
Enables measurement of ultra-low carbon concentration with high accuracy by eliminating hydrocarbon impurities in the carrier gas.
High Performance Heating Filter Unit
Samples which are moist or that generate water during analysis may cause a small error for the analysis of sulfur. This is due to the evolved water absorbing the SO2 gas. Using the heating filter, the absorption of SO2 by moisture is prevented, and highly accurate sulfur analysis is guaranteed.
Features
Long MTBM (Mean Time Between Maintenance)
The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition
Before measurement After 200 measurements
High Throughput
EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)
Fast & Easy Maintenance
With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.
Flat design around the crucible stand
Advanced Operation software
A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.
* Analysis Navigator
This function uses the recommended best measurement flow and operating condition based on our experience. Explore more
* Troubleshooting Navigator
Automatic diagnosis system and troubleshooting navigator. Explore more
* Maintenance Navigator
Periodic preventive maintenance work navigator by videos and photos. Explore more
Option
The customer can extend the system’s functionality at any time, even after installation, depending upon their needs.
* Auto-sampler (20 positions)
* Halogen trap unit
Manufactured by HORIBA
Specifications
Contents | EMIA-Expert | |
|---|---|---|
Required sample amount | 1g ± 0.1g | |
Typical Meas. time | 70 seconds/cycle | |
Carbon | Meas. Range (m/m) | 0.6 ppm - 10.0% |
Blank accuracy | σn-1≦ 0.3 ppm | |
Sulfur | Meas. Range (m/m) | 0.6 ppm - 1.0% |
Blank accuracy | σn-1 ≦ 0.3 ppm | |
Sample meas. Accuracy | Carbon | σn-1 ≦ 0.3 ppm(less than 20 ppm) |
Sulfur | σn-1 ≦ 0.3 ppm(less than 20 ppm) | |
Utility | Carrier gas | Oxygen |
Operation gas | Nitrogen | |
Power | 200/220/240V, 50/60Hz, 5kVA | |
Dimensions | Main unit* | 500(W) x 725(D) x 710(H) mm |
Purifier unit | 160(W) x 560(D) x 512(H) mm | |
Mass | Main unit | approximately 134 kg |
Purifier unit | approximately 21 kg | |
Data processing and operation | USB data communication with PC Windows 8.1 | |
Model name | EMIA-20E: Carbon/Sulfur | |
Note) "ppm" is equal to mg/kg.
*Except piping parts, projection parts (D:79mm) and flow meter on the back side.
Schematics
Brochures
Accessories
Crucible Pre-heating Unit
The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.
Autosampler
Automation crucible loading and disposing unit.
Up to 20 pcs of crucible are available to be set.
Consumables
Ceramic crucible
Low carbon blank and high dimension tolerance for high precision analysis.
Accelerators
High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)
Related Products
Standard Model: EMIA-Pro
Enables everyone to become a professional analyst
This is an oxygen and nitrogen elemental analyzer with high accuracy and repeatability suiting to...
The HORIBA EMGA-921 determines the hydrogen contained in ferrous metals, non-ferrous metals,...
The GD-Profiler 2™ provides fast, simultaneous analysis of all elements of interest including the...
The Ultima Expert is specially designed to handle the most challenging applications and offers the...
High spectral resolution analytical Raman microscope for ultimate performance and flexibility;...