OBS-ONE PN Unit

OBS-ONE PN - On-board Emissions Measurement

OBS-ONE PN - Portable Emissions Measurement

On-board Emissions Measurement System

On-board PN measurement for real-world results

The OBS-ONE PN unit is an on-board emissions measurement system for analyzing the solid particle number concentration within the specified particle size range under real-world driving conditions. The unit uses a condensation particle counter which is recommended principle by the Particle Measurement Programme (PMP), one of working groups affiliated with UNECE.
The PN unit combines with the GAS unit to measure the specified exhaust gas components, along with the exhaust gas flow rate, the GPS position, and the atmospheric conditions (temperature, humidity, pressure).

Segment: Automotive

Abteilung: Emission Measurement Systems

Produktionsfirma: HORIBA, Ltd.

For Certification to the draft regulation as currently understood

Meeting the requirements of the Euro 6 draft regulation (RDE mandatory certification starting Sep. 2017)

For R&D

Compare in-lab test results with real-road test results

◎ Compact dimensions realized by the optimized volatile particle remover and modified CPC.

◎ Isopropyl alcohol as the working fluid: safely and conveniently used by saturation of a small cartridge during test preparation - no reservoir required

◎ User-friendly design mounts easily on any vehicle

Integrated Operating Platform

OBS-ONE - ONE Platform

The OBS-ONE and other HORIBA ONE series systems employ a common user interface with future expandability. Control, monitoring and management of each emission measurement device and each module unit of OBS-ONE series can be integrated into a single controller.

OBS-ONE PN - Accurate Data

Measuring Principles	Condensation particle counter (CPC)
Particle Diameter	23 ～ 1,000 nm
Measuring Range	0 ～ 5 × 10⁷ particles/cm³
Power Supply	DC 24 V
Power Consumption (MAX.)	Approx. 0.25 kW
Mass	Approx. 18 kg
Operating Condition	Temperature: -10 ～ 40 ℃, Altitude: 0 to 2,000 m above sea level, Relative humidity: less than 80% (No condensation)
Condensation fluid	Isopropyl alcohol a special grade reagent (99.5%) corresponded
Option	Outer cover for mounting outside the vehicle using a hitch carrier

RDE Test with Portable Emission Measurement System (PEMS)

In 2016 the European Commission´s (EC) Member States agreed on new procedures and requirements for light-duty vehicle type approval certification introducing Portable Emission Measurement System (PEMS) for vehicle testing on the road.

Real driving emissions with RDE CoDriver

Real Driving Emission (RDE) tests confirm the results produced during an emissions test on a chassis dynamometer to ensure that vehicles meet the set limits in the real world.

Particle Measurement in the Sub-23nm Range

Concerns exist that advances in modern engine technology may contribute to large portions of solid particles at sizes smaller than 23nm. The EU Joint Research Center has confirmed this concern in several investigations.

Size: 0.51 MB

OBS-ONE PN Brochure English