Mixer/Mill 5100

Übersicht

Small high-energy ball mill that accommodates sample sizes ranging from 0.2 - 1.5 grams. Ideal for grinding and pulverizing brittle samples, slurry grinding, and mixing powders.

Typical samples include: Rocks, Minerals, Sand, Cement, Slag, Ceramics, Catalyst Supports, Glass, Pharmaceuticals, Plant and Animal Tissues, Seeds

Merkmale

  • Also called a shaker mill or high-energy ball mill.
  • Equipped with safety interlock system for operator protection.
  • For grinding samples in the 0.2 - 1.5 gram range or mixing up to 5 mL of sample.
  • Highly effective laboratory impact grinder and blender offering many advantages over other small mixers.
  • Holds three vials of 1/2 in. (12.7 mm) diameter or two vials of 3/4 in. (19.1 mm) diameter. Length of vials up to 21/4 in. (57.2 mm).
  • Push-button, resettable 30-minute timer on the 5100-115 Mixer/Mill.
  • Push-button, resettable 72-minute timer on the 5100-230 Mixer/Mill.
  • Reduces samples to analytical fineness and commonly used to blend samples with KBr for IR analysis.
  • Shock mounted motor enables bench top operation.
  • Steel housing protects the clamp mechanism and rugged construction ensures a long life of heavy work.
  • Wide selection of grinding and mixing vials available including polystyrene, polycarbonate, hardened steel, stainless steel, tungsten carbide, and agate.

Hergestellt von Spex Sample Prep

Spezifikationen

Voltage

115V/60Hz or 230V/50Hz

Dimensions

12 in (33 cm) x 8 in (20cm) x 8 in (20cm)

Net Weight (lbs)

15.2 lbs (7kg)

Gross Weight (lbs)

19.8 lbs (9kg)

Motor

1/15 hp, 3000 RPM @ 60Hz, 2500 RPM @ 50Hz

Power Cord

3-prong grounded plug, 115V 60Hz or CEE 7/7 2-prong Europeanplug, 230V 50Hz

Clamp Movement

.5 in (12.7mm) front-to back, .375 in (9.5mm) side-to-side

Clamp Speed

3000 cycles/minute (115V) or 2500 cycles/minute (230V)

Timer/Controls

Range from 1 - 30 minutes (115V) or Range from 1 - 72 minutes(230V)

Zubehör

Part #

Description

GRINDING MEDIA

3112

Methacrylate Grinding Balls, 3/8 In. (9.5 mm)

3114SB

Stainless Steel Grinding Ball, 1/4 In. (6.35 mm)

3117B

Hardened Steel Grinding Ball, 1/4 In. (6.35 mm)

3118A

Agate Grinding Ball, 1/4 In. (6.35 mm)

3119

Methacrylate Grinding Balls, 1/8 In. (3.2 mm)

5004A

Tungsten Carbide Grinding Ball, 5/16 In. (7.9 mm)

VIALS AND VIAL SETS

3111

2.5 ML Polystyrene Grinding Vial With Slip-On Cap

3114

2.5 ML Stainless Steel Grinding Vial Set

3116

5 ML Polystyrene Grinding Vial With Slip-On Cap

3116PC

5 ML Polycarbonate Vial With Slip-On Cap

3117

2.5 ML Hardened Tool Steel Grinding Vial Set

3118

1.6 ML Agate Grinding Vial Set

3127

5 ML Hardened Tool Steel Grinding Vial Set

5004

5 ML Tungsten Carbide Lined Grinding Vial Set

5004C

Methacrylate Center Cylinder For 5004

5004E

Delrin® End Cap W/O Tungsten Carbide Insert For 5004

5004I

Tungsten Carbide Insert For 5004

5004W

Delrin® End Cap With Tungsten Carbide Insert For 5004

6133

12 ML Polystyrene Grinding Vial With Slip-On Cap

6133PC

12 ML Polycarbonate Grinding Vial With Slip-On Cap

6134

35 ML Polyethylene Grinding Vial With Slip-On Cap

6135

75 ML Polypropylene Grinding Vial With Attached Cap