Revised 06/11/98
This disk contains the following files:

In \TO-PRINT
    *.*
    Directory contains any last minute documentation changes or additions
    that should be printed out and stored with the original user's manual.

In \BINARY
    FLASH.V46      binary FLASH image, version 4.6

In \USERPROG
    COM_TEST.BAS
    SCAN_232.BAS
    232_SCAN.BAS
    232_SCAN.INI
    232_SCAN.USR

In \UTILITY
    FLLOAD.EXE     Version 2.11
    HWCFG232.EXE   Version V2.31 RS-232
    232M.EXE       Version 1.0   RS-232

If you have the IEEE-488 option
In \USERPROG\IEEE488
    SCAN_488.BAS
    488_SCAN.BAS
    488_SCAN.INI
    488_SCAN.USR

In \UTILITY\IEEE488
    FLLOAD4.EXE    Version 2.11
    HWCFG488.EXE   Version V2.31 IEEE-488
    488M.EXE       Version 1.0   IEEE-488

Files with the .BAS extension are sample BASIC programs compatible with
Microsoft's GWBASIC and QBASIC.

These programs control SPEX and JY spectrometer systems interfaced via
the following: SPEX232, SPEX488, JY232, JY488, DataScan, and DataLink.

Each BASIC program has comments within the program which briefly explains
its purpose and methodology.  Remember, these programs are for reference
only, and no guarantees come with them.  When running the BASIC programs
all the files in the \USERPROG (or \USERPROG\IEEE488) subdirectory must be
present in the current directory.
 Note: GWBASIC my be unreliable at baud rates above 4800 baud.
       QBASIC is NOT supported by National Instruments IEEE-488.

 The 180D, 220M, 270M and HR-460 are suported by these programs, but only to
 a limited extent. If you are programming one of the above you must wait for
 accessory NOT busy before you move a motor (mono or slit). Also, if you
 are moving a slit or the mono you must wait for motor NOT busy before
 operating an accessory (eg. shutter, turret etc.)
 (See the Manual for more details)


FLLOAD.EXE is the RS-232 version of the flash RAM loader program
HWCFG232.EXE is the RS-232 version of the Hardware Configuration Program.
FLLOAD4.EXE is the IEEE-488 version of the flash RAM loader program
HWCFG488.EXE is the IEEE-488 version of the Hardware Configuration Program.
    Please refer to the manual for instructions on usage.

232M and 488M are utilities which provide minimum user interface to 
communicate to hardware through serial (232M) or GPIB (488M) interface.
