IT-450 Series Non-contact infrared thermometer
Vue d'ensemble
This non-contact infrared thermometers achieve miniaturization like that of an ultra-compact photoelectric switch, and focusing of the measurement field into a single spot. They enable measurement without damaging the object, whether the object is stationary, rotating or moving, and can flexibly handle a wide range of temperature control tasks in production lines, such as line stopping and heater control. Six models are available to suit the application.
Fonctions
- 0.4 sec / 95%, high response speed
- Measure on very little and long distance surface with high precision according to spot measurement on measured view.
- To be realized wide measuring range.
Fabriqué par HORIBA
Caractéristiques
IT-450S | IT-450L | IT-450FH | IT-450NH | IT-450F | IT-450N | |
|---|---|---|---|---|---|---|
Measured temperature range | 0 °C to 500 °C | 0 °C to 1000 °C | -50 °C to 500 °C (setting cange in programer is required at less than 0 °C) | |||
Analog output*1 | 4 mA to 20 mA / 0 °C to 500 °C Load impedance: 300 Ω or less | 4 mA to 20 mA / 0 °C to 1000 °C Load impedance: 300 Ω or less | 4 mA to 20 mA / 0°C to 500 °C Load impedance: 300 Ω or less | |||
Accuracy*2 | ±(3+0.1% of output range) °C or less (0 °C to 300 °C) ±(2% rdg-3 + 0.1% of output range) °C or less (300 °C to 500 °C) | ±(2+0.1% of output range) °C or less (0 °C to 200 °C) ±(1% rdg + 0.1% of output range) °C or less (200 °C to 1000 °C) | ±(10% rdg +2+0.1% of output range) °C or less (-50 °C to 0 °C) ±(2+0.1% of output range) °C or less (0 °C to 200 °C) ±(1% rdg + 0.1% of output range) °C or less (200 °C to 500 °C) | |||
Repeatability | 1 °C or less | 0.5 °C or less (0 °C to 500 °C or less) 1 °C or less (500 °C to 1000 °C or less) | 1 °C or less | 0.5 °C or less | ||
Temperature drift | ±(0.2 °C in the unit of °C + 0.01% of output range in the unit of °C) or less | ±(0.25°C in the unit of °C) or less (0°C to 500°C or less) ±(0.5 °C in the unit of °C) or less (500 °C to 1000 °C or less) | ±(0.5°C in the unit of °C) or less (-50°C to less than 0°C) ±(0.25 °C in the unit of °C) or less (0 °C to 500 °C or less) | |||
Measurement field / distance | δ3/30 | δ8/100 | δ35/1000 | δ40/500 | δ35/1000 | δ40/500 |
Mass | Approx. 120g | Approx. 150g | Approx. 120g | Approx. 150g | Approx. 120g | |
Emissivity | Set to 0.95 at factory | |||||
Spectral response | 8 µm to 16 µm | |||||
Response time | 0.4 seconds or less (95% response, Moving average data value = 1) | |||||
Ambient temperature/humidity | Temperature: 0 °C to 55 °C, relative humidity: 35% to 85% (No condensation) | |||||
Power supply | 12V to 24V DC | |||||
Power consumption | 40mA or less (45 mA or less when programer is connected.) | |||||
Cable length | 2 m | |||||
Unit case material | NYLON 6 | |||||
Water-resistance | IP X2 | |||||
*1: Optional programmer enables freely output scale settings
*2: Ambient temperature: 23 °C ± 5 °C, Ambient humidity: 55% ± 20%,Emissivity: 1.00
rdg: Reading value