510 Series Gas Analyzers

Overview

The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an industry-standard interface.

The 510 series can be used for a wide variety of analyses and tests, such as industrial process control and composition analysis, and fixed-source emissions monitoring. Each model is configured using one of four analyzers: the VIA-510 infrared analyzer, the CLA-510 chemi-NO_X analyzer, and the MPA-510 O2 analyzer.

A high level of sensitivity is achieved through the use of a dual-beam NDIR, Chemiluminescence, and Magneto-pneumatic analysis methods. The NDIR analyzers use an infrared absorption method which offers superior sensitivity, selectivity, and stability. With the Magnetopneumatic analyzer, high-sensitivity measurements can be realized free of zero drift due to the use of N2 as the operation gas. The Chemiluminescence analyzers use a dryer unit equipped with automatic reseneation, so ambient air can be used as the source of O3. It also provides 7 ranges and a range of 1:100 (0-20/50/100/1000/2000ppm), making it easy to handle a wide variety of applications. These highly accurate, high performance analyzers are suitable for process monitoring and control.

Features

Selectable outputs: 0-1 VDC, 0-10 VDC, and 4-20 mA
Digital outputs: range setting information.
Digital alarms: indicate malfunctions or calibration failure.
Digital inputs: Zero cal, Span cal, Data hold.
Range inputs: 4 inputs BCD code.

Manufactured by HORIBA

Specifications

Model	Gas	Min.	Max.	High-sensitivity range
VIA-510	Carbon Monoxide (CO)	0-100ppm	0-100%	0-50ppm
VIA-510	Carbon Dioxide (CO₂)	0-100ppm	0-100%	0-50ppm
VIA-510	Sulfur Dioxide (SO₂)	0-100ppm	0-100%	0-50ppm
VIA-510	Methane (CH₄)	0-100ppm	0-100%	0-50ppm
VIA-510	Nitrous Oxide (N₂O)	0-100ppm	0-100%	0-50ppm
MPA-510	Oxygen (O₂)	0-5%	0-100%	0-1%
CLA-510	Nitric Oxide (NO)	0-100ppm	0-5000ppm	0-20ppm

Common specification in 510 series

Configuration	Desk top or 19 " panel mount
Ambient conditions	Temperature: 0 to 40 °C Humidity: 90% RH or less
Power	100 / 115 / 220 V DC, 0 - 10 V DC, 0 - 16 mA or 4 - 20mA DC, isolated
Output signal	0 - 1 V DC, 0 - 10 V DC, 0 - 16 or 4 - 20mA DC, isolated
Display	LED digital display (effective 4 digits.)
Dimensions	430 (W) x 132 (H) x 550 (D) mm 16.9 (W) x 5.2 (H) x 21.7 (D) in
Sample gas requirements	Dust: No Mist: Completely removed Pressure: More than 50 mm H₂O Temperature: Ambient temperature Moisture: 5°C saturation or below Flow rate: 500mL / min Exhaust gas: Discharged at ambient pressure

VIA-510

Measureing method	NDIR
Repeatability	±0.5% F.S. (±1.0% F.S. for high-sensitivity range)
Drift	±1.0% F.S. per day (±2.0% F.S. per day for high-sensitivity range)
Response time	10 sec. (electrical)
Operation gas	Not needed
Calibration gas	Zero: N₂ or Air, Span: Span gas
Mass.	15kg, 33 lb

MPA-510

Measureing method	Magnetopneumatic
Repeatability	±0.5% F.S. (±1.0% F.S. for high-sensitivity range)
Drift	±1.0% F.S. per day (±2.0% F.S. per day for high-sensitivity range)
Response time	10 sec. (electrical)
Operation gas	N₂, Flow rate: 6 mL/min.
Calibration gas	Zero: N₂, Span: Span gas or Air
Mass.	15kg, 33 lb

CLA-510SS

Measureing method	Chemiluminescence
Repeatability	±0.5% F.S. (±1.0% F.S. for high-sensitivity range)
Drift	±1.0% F.S. per day (±2.0% F.S. per day for high-sensitivity range)
Response time	10 sec. (electrical)
Operation gas	Not needed (ambient air used)
Calibration gas	Zero: N₂ or Air, Span: Span gas
Mass.	20kg, 44 lb