OCMA-305 Oil Content Monitor

OCMA-305 Oil Content Analyzer

Overview

The new HORIBA OCMA-305 oil content analyzer comes loaded with a welcome range of innovative features.
A Powerful built-in computer makes the new version a joy to use.
Just pour in an aqueous sample and solvent then push a single button. The OCMA-305 takes over and does everything for you - from extracting the oil components to measurement and drain. The whole process is fast, sure, super-accurate - and, of course, no more troublesome range-switching. Now anyone can make precision analyses without special training.
HORIBA has developed Type H-997 extraction solvent for use with the OCMA. The H-997 solvent can also be recycled by using HORIBA's optional Solvent Reclaimer.
The OCMA-305 is much more versatile, even simpler to use. HORIBA is proud to introduce to the world a truly user-friendly oil content analyzer.

Features

  • Built-in computer automates calibra-tion and measurement procedures.
    Once you have introduced the solvent and oily water sample to the unit, just push the START button. Everything is automated - from mixing and extracting the oil components to measurement and drain. Calibration is a snap. Just introduce de-ionized water in place of the oily water sample, and the OCMA-305 handles the automated process for you.
  • 0 - 200 mg/L dynamic range
    A pyro-electric sensor gives you a full dynamic range from 0 - 200 mg/L, with no need for range-switching. this makes the OCMA-305 perfect for fast, accurate measurements of all types of samples, from low to high concentration.
  • Short warm-up time
    Warms up in 20 minutes or less. This means you can get started three times faster than before.
  • Optical adjustment unnecessary
    The troublesome optical adjustments as-sociated with conventional pneumatic NDIR analyzers is no longer necessary.
  • Stable measurement readout
    The OCMA-305 determines automatically when the measured value has stabilized, and holds that value for you. This means you always get consistent, stable data readouts.
  • Self-diagnosis function
    The unit self-monitors for any possible problems, e.g., glitches during measure-ment; motor or sample-transfer malfunc-tions; deterioration of the light-source; or electrical problems. Should anything out of the ordinary occur, you can spot it right away by a quick check of the warning lamps and the linked on-screen error messages

Manufactured by HORIBA

Specifications

Application

Oil contamination of fresh and salt water; soil analysis

Principle

Solvent extraction, NDIR analysis (Infrared spectroscopy)

Detector

Pyroelectric sensor

Measuring Range

0 to 200 mg/L

Resolution

0 to 99.9 mg/L; 0.1 mg/L
100 to 200 mg/L; 1 mg/L

Repeatability

0 to 9.9 mg/L; ± 0.2 mg/L ± 1 digit
10.0 to 99.9 mg/L; ± 2 mg/L ± 1 digit
100 to 200 mg/L; ± 4 mg/L ± 1 digit

Measurement

Automatic after introduction of the oily water sample or manual operation, selectable

Calibration

Automatic zero and span calibration after the oily water sample is introduced to the instrument.

Extraction Solvent

HORIBA H-997 solvent

Sample/Solvent Volume

20 mL/10 mL

Extraction Method

Built-in extractor for oily water samples

Display

Measured value; 3 digits LCD with backlit
Message; Character display LCD with backlit (16 x 2 characters)

Functions

Data memory up to 50 data, Self diagnostics, Stable type display, Interactive operation, Calendar clock

Output

RS-232C and parallel printer port

Ambient Temperature

0 to 40 °C

Power Requirement

100 to 240 V AC ±10%, 50/60 Hz
100 to 120 V AC; approx. 80 VA
200 to 240 V AC; approx. 120 VA

Dimensions

200(W) x 315(D) x 342(H) mm
7.8(W) x 12.4(D) x 13.5(H) in

Mass

Approx. 7 kg/15.5 lb