EMIA-Pro Carbon/Sulfur Analyzer
Standard Model: EMIA-Pro
Enables everyone to become a professional analyst
The EMIA-Pro Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.
Long MTBM (Mean Time Between Maintenance)
The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition
Before measurement After 200 measurements
EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)
Fast & Easy Maintenance
With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.
Flat design around the crucible stand
Advanced Operation software
A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.
* Analysis Navigator
This function uses the recommended best measurement flow and operating condition based on our experience. Explore more
* Troubleshooting Navigator
Automatic diagnosis system and troubleshooting navigator. Explore more
* Maintenance Navigator
Periodic preventive maintenance work navigator by videos and photos. Explore more
The customer can extend the system’s functionality at any time, even after installation, depending upon their needs. Upgrades include:
* Carrier gas purifier for ultra-low concentration carbon measurement
* Auto-sampler (20 positions)
* Halogen trap unit
Manufactured by HORIBA
Required sample amount
1g ± 0.1g
Typical Meas. time
Meas. Range (m/m)
1.6 ppm - 6.0%
σn-1 ≦ 0.8 ppm
Meas. Range (m/m)
2.0 ppm - 1.0%
σn-1 ≦ 1.0 ppm
Sample meas. Accuracy
σn-1 ≦ 2.0 ppm
σn-1 ≦ 2.0 ppm
200/220/240V, 50/60Hz, 5kVA
500(W) x 725(D) x 710(H) mm
approximately 134 kg
Data processing and operation
USB data communication with PC Windows 8.1
Note) "ppm" is equal to mg/kg.
*Except piping parts, projection parts (D:79mm) and flow meter on the back side.
Crucible Pre-heating Unit
The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.
Automation crucible loading and disposing unit.
Up to 20 pcs of crucible are available to be set.
Low carbon blank and high dimension tolerance for high precision analysis.
High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)