Particle Characterization
LA-950
LA-950
Effects of Chemistry Variations on Dimensional Control of 316L Stainless Steel |
Characterization of ultrasound-mediated destruction of drug-loaded microbubbles using an improved in vitro model |
Determination of thermal radiative properties of packed-bed media containing a mixture of polydispersed particles |
Densification, microstructural evolution, and dielectric properties of hexagonal Ba(Ti1−xMnx)O3 ceramics sintered with fluxes |
Effect of SiO2 addition on the microstructure and microwave dielectric properties of ultra-low fire TiTe3O8 ceramics |
Synthesis of dysprosium and cerium nitrides by a mechanically induced gas-solid reaction |
Bench-Scale tests on ultrasound-assisted acid washing and thermal desorption of mercury from dredging sludge and other solid matrices |
Oxidation of alkanes and olefins with hydrogen peroxide in acetonitrile solution catalyzed by a mesoporous titanium-silicate Ti-MMM-2 |
Effect of particle size on three dimensional printed mesh structures |
Solar-driven biochar gasification in a particle-flow reactor |
Combustion synthesis of doped LaGaO3 perovskite oxide with Fe |
Thermal conductivity of combustion synthesized β-sialons |
Photoluminescence and Raman spectroscopy studies on polyaniline/PbI2 composite |
Solvothermal synthesis of spherical YAG powders via different precipitants |
Comparison of separation performance between single and two inlets hydrocyclones |
Microwave sintering of 8 mol% yttria?zirconia (8YZ): An inert matrix material for nuclear fuel applications |
Predicting productivity of trembling aspen in the Boreal Shield ecozone of Quebec using different sources of soil and site information |
CO2 capture from atmospheric air via consecutive CaO-carbonation and CaCO3-calcination cycles in a fluidized-bed solar reactor |
The non-uniformity of microcrystalline cellulose bilayer tablets |
Glass corrosion mechanisms: A multiscale analysis |
Synthesis of uranium nitride by a mechanically induced gas-solid reaction |
A novel approach to fabricating fuel compacts for the next generation nuclear plant (NGNP) |
3DP process for fine mesh structure printing |
Alternating release of different bioactive molecules from a complexation polymer system |
Colloidal stability and rheological properties of sesame paste |
Effects of inclined jets on turbulent oxy-flame characteristics in a triple jet burner |
Preparation and characterization of monodisperse carbon cryogel microspheres |
Carbon sequestration, vegetation dynamics and soil development in the Boreal Transition ecoregion of Saskatchewan during the Holocene |
The proximal N-terminal amino acid residues are required for the coupling activity of the bovine heart mitochondrial factor B |
Electrical and dielectric properties of lithium manganate nanomaterials doped with rare-earth elements |
Neuro transmitter,peptide and cytokine processes in relation to depressive disorder: Comorbidity between depression and neuro degenerative disorders |
Coating different thickness nickel-boron nanolayers onto boron carbide particles |
Indoor pollutants emitted by office equipment: A review of reported data and information needs |
Axial tensile fracture of microcrystalline cellulose compacts |
Grazing effect of the invasive reef-forming polychaete Ficopomatus enigmaticus (Fauvel) on phytoplankton biomass in a SW Atlantic coastal lagoon |
Ecosystem carbon gains from afforestation in the Boreal Transition ecozone of Saskatchewan (Canada) are coupled with the devolution of Black Chernozems |
Preparation and characterization of Nb-doped TiO2 nanoparticles used as a conductive support for bifunctional CuCo2O4 electro catalyst |
Physico-chemical characteristics of carbon deposits collected in TEXTOR and Tore Supratokamaks |
The effects of oxygen on the yields of the thermal decomposition products of catechol under pyrolysis and fuel-rich oxidation conditions |
Preparation and characterization of inexpensive heterogeneous catalysts for air pollution control: Two case studies |
Scintillation and optical properties of YAG:Ce films grown by liquid phase epitaxy |
Topographic Characterization of Cellulose Bilayered Tablets Interfaces |
Quantitative structural and textural assessment of laminar pyrocarbons through Raman spectroscopy, electron diffraction and few other techniques |
Device quality a-Si:H deposited from electron cyclotron resonance at very high deposition rates |
Ca2+ currents in cardiac myocytes: Old story, new insights |
Preparation of single crystalline Sr0.5Ba0.5Nb2O6 particles |
Levels of selected metals in ambient air PM10 in an urban site of Zaragoza (Spain) |
Carbon nanotubes for power applications |
The relationship of structural defect-redox property-catalytic performance of perovskites and their related compounds for CO and NOx removal |
Fabrication of zirconia- and ceria-based thin-wall tubes by thermoplastic extrusion |
The assessment of water quality in the Lower Luján River (Buenos Aires, Argentina): phytoplankton and algal bioassays |
Injection moulding and sintering of ceria ceramics |
The electrical properties of high-dielectric-constant and ferroelectric thin films for very large scale integration circuits |
An experimental study on the thermal decomposition of catechol |
Development of CaF2 special refractory components |
Quantification of oxygen consumption and sulphate release rates for waste rock piles using kinetic cells: Cluff lake uranium mine, northern Saskatchewan, Canada |
Slipcasting of submicron BaTiO3 produced by low-temperature aqueous synthesis |
Techniques for measuring the composition (oil and water content) of emulsions - a state of the art review |
Preparation of α- and β-tricalcium phosphate ceramics, with and without magnesium addition |
Synthesis of single crystal SnS2 by chemical vapor transport method at low temperature using reverse temperature gradient |
Preparation of spherical and controlled size particles of silica or tantalum oxide by chemical reaction in aerosols |
An experimental animal study for risk assessment of indoor air pollutants |
LA-910 & LA-950
The Thermal Decomposition of Carbohydrates. Part II. The Decomposition of Starch |
Sustained release subcutaneous delivery of BMS-686117, a GLP-1 receptor peptide agonist, via a zinc adduct |
Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials - the influence of bismuth |
Particulate matter < 10 μm (PM10) and total suspended particulates (TSP) in urban, rural and alpine air in Switzerland |
Crystallization of Nb3Sn from solution in a niobium tube |
LA-920 & LA-950
Surface modification of silica particles using polyimide |
Influence of cross-linked potato starch treated with POCl3 on DSC, rheological properties and granule size |
Physicochemical assessments of parenteral lipid emulsions: light obscuration versus laser diffraction |
Densification and grain growth in BaTiO3 ceramics fabricated from nanopowders synthesized by ball-milling assisted hydrothermal reaction |
LA-930 & LA-950
New evidence for a glacioeustatic influence on deep water circulation, bottom water ventilation and primary productivity in the South China Sea |
Tailings dam seepage at the rehabilitated Mary Kathleen uranium mine, Australia |
Characterization of urban air quality using GIS as a management system |
LB-550 & LA-950
The preparation and characterization of Y-TZP/20 wt% alumina |
Biology and pathophysiology of leukotrienes |
LA-910, LA-920 & LA-950
Microbial activity in a combined UASB - activated sludge reactor system |
Catalytic treating of gas pollutants over cobalt catalyst supported on porous carbons derived from rice husk and carbon nanotube |
Anion effects on electrostatic charging of sterically stabilized, water insoluble drug particles |
Late Quaternary hydroclimatology of a hyper-arid Andean watershed: Climate change, floods, and hydrologic responses to the El Niño-Southern Oscillation in the Atacama Desert |
Influencing effect of intra-granule mass transfer in expanded granular sludge-bed reactors treating an inhibitory substrate |
Deducing source rock lithology from detrital rutile geochemistry: An example from the Erzgebirge, Germany |
Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data |
Millennial-scale changes in terrestrial sediment input and Holocene surface hydrography in the northern South China Sea (IMAGES MD972146) |
Firesides lagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels |
LA-910, LA-930 & LA-950
Tests of cesium iodide crystals for an electromagnetic calorimeter |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |
Member login
Forgot Password?
Having trouble login in? Please click here and we will send a new password. If you are still having trouble, contact us at web_member@horiba.com.
Not a member yet?
Register and receive access to advanced information, including Application Data Sheets, Application Notes, Brochures, Links to External Articles, Manuals, Software Downloads, Software Updates. When you register you will also receive periodic updates by e-mail. Create a new account.