Particle Characterization
DT-1201
Overview
The DT-1201 AcoustoPhor Acoustic & ElectroAcoustic Spectrometer measures both particle size and zeta potential of concentrated colloids, suspensions and emulsions. It offers unparalleled analytical capabilities for advanced dispersion characterization of even complex sample types at process concentrations.
The DT series of instruments use acoustic and electroacoustic spectroscopy to characterize a wide range of concentrated materials without dilution, thus providing meaningful results for real- world samples. Alternative analytical techniques require significant dilution of the sample to accommodate instrument limitations. Such unwanted dilution most often changes the sample properties such that the measured results may give a very false picture of the particle size and zeta potential of the actual product.
The theories of acoustic and electroacoustic measurements have been developed and refined over several decades by the researchers of Dispersion Technology Inc. These refined instruments are now being supported by Horiba Instruments’ applications and service staff.
Features
Measure without dilution
The acoustic measurement method allows accurate measurements to be made at concentrations up to 50 volume %, eliminating the need for dilution or other sample preparation.
Wide particle size range
The advanced measurement sensor system allows a particle size range of 0.005-100µm to be measured in a single analysis.
Wide range of sample types
The highly-refined analyzer and measurement algorithms allow a wide range of sample types to be measured, including those that are difficult for other acoustic or electroacoustic analyzers:
• Mixed systems of dissimilar materials, e.g. alumina / zirconia ceramic slip.
• Measures particle size even for extreme cases of conductivity, e.g Portland cement. (Works even with conducting particles).
• Measures particles size in polymer solutions with extremely high macroscopic viscosity.
• Particle size measurement does not require charged particles.
Range of Sampling Systems
Samples can measured in a static 50ml sampling chamber, mixed with a magnetic stirrer or circulated with a peristaltic pump, depending on the requirements of the sample.
Measurement of Colloids: possible with viscosities up to 20,000 cP
Advanced measurement system
The acoustic attenuation measurement sensor has an unequaled specification, providing the widest range of capabilities and highest performance.
• Frequency range: 1 - 100 MHz
• Variable detector spacing
• No particle size calibration required such as measuring a colloid with known particle size.
• Sound speed measurement - 800 – 2000 m/sec • Visco-elastic extensional properties
• Compressibility of liquid system
Manufactured by HORIBA
Specifications
The measuring chamber of the DT-1201 analyzer contains both acoustic and electroacoustic sensors. As a result, this instrument is capable of measuring attenuation spectra (for particle size measurement) as well as Colloid Vibration Current (for zeta potential measurement) simultaneously.
Particle Size Measurement
Acoustic attenuation is used for the entire particle size measurement range. Sound pulses are transmitted through the sample. The attenuation of these pulses is measured over a wide range of ultrasonic frequencies and at a range of detector spacings. This attenuation depends on the particle size, which can then be calculated from the measured spectra. The software takes into account several mechanisms of ultrasound interaction with the colloid particles, including scattering, viscous dissipation and thermodynamic coupling and a detailed knowledge of the physical basis of acoustic attenuation in concentrated polydisperse systems.
Advantages of Acoustic Measurements Over Electroacoustics For Particle Size Analysis:
In principle, particle size can be measured to some degree using electroacoustic spectroscopy, but there are several advantages of using acoustic spectroscopy instead.
• No calibration needed
• Much wider particle size range
• Independent of the Double Layer models
• Independent of electric surface properties
• Provides particle size even for uncharged particles
• Suitable for non-aqueous systems
• Suitable for highly conducting systems
Particle Size Analyzer
Member login
Forgot Password?
Having trouble login in? Please click here and we will send a new password. If you are still having trouble, contact us at web_member@horiba.com.
Not a member yet?
Register and receive access to advanced information, including Application Data Sheets, Application Notes, Brochures, Links to External Articles, Manuals, Software Downloads, Software Updates. When you register you will also receive periodic updates by e-mail. Create a new account.