ESH-01-C-SN Sanitary Conductivity Sensor (Ferrule Clamp type) for Low Concentrations ESH-01-C-SN

Overview

The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals and foods and beverages.

Features

  • Tough structure that can withstand steam sterilization
    Complies with the steam sterilization condition at 140°C / 0.6 MPa (60 minutes)
  • Electro-polished and mechanically polished, which satisfies the requirements for sanitary pipes.
  • SUS316L, PEEK, and FKM are used as materials for contact with fluids

Manufactured by HORIBA Advanced Techno

Specifications

Model

ESH-01-C-S-SN 1.5 S

Measurement principle

Alternative two-pole method

Cell constant

Approx. 0.1 /cm

Measurement range

0 to 200 µS/cm (complies with the specifications of the conductivity converter)

Measurement temperature

0 to 100°C (complies with the specifications of the conductivity converter)

Pressure range

0 to 1 MPa

Ambient operating temperature / humidity

0 to 50°C, 95% RH or lower

Structure

IP67 or equivalent

Materials for contact with fluids

SUS 316L, PEEK, FKM

Steam sterilization

140°C / 0.6 MPa, within 60 minutes

Connection bore diameter

IDF / ISO 1.5 S ferrule

Weight

Approx. 0.3 kg

Cables

10 m Y-shaped terminal