FES-210L Sanitary Conductivity Sensor (Ferrule Clamp type)

Overview

The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions.
The FES-210L Series, which is used in conjunction with the conductivity converter HE-960HS, demonstrates the optimum high sanitary characteristics that are ideal for the concentration and CIP management employed at food (beverage) and cosmetics plants.

Features

  • Flat structure keeps dirt from adhering
  • Wide measurement range of 0 to 500 S/m
  • Line-up of 2 sensor sizes: 1.5 S, 2 S
  • SUS316L, PTFE, and FKM are used as materials for contact with fluids

Manufactured by HORIBA Advanced Techno

Specifications

Model

FES-210-L-S-SN-1.5S

FES-210-L-S-SN-2.0S

Measurement principle

Alternative four-pole method

Cell constant

Approx. 0.1 /cm

Measurement range

0 to 500 mS/cm (complies with the specifications of the conductivity converter)

Temperature range under normal use

0 to 110°C

Pressure range

0 to 1 MPa

Ambient operating temperature / humidity

0 to 50°C, 95% RH or lower

Structure

IP67 or equivalent

Materials for contact with fluids

SUS 316L, PPS, FKM

Steam sterilization

40°C / 0.6 MPa, (within 60 minutes)

Connection bore diameter

IDF / ISO 1.5 S ferrule

IDF / ISO 2.0 S ferrule

Weight

Approx. 2.0 kg with a 10 m Cable

Cables

10 m Y-shaped terminal