HORIBA are able to offer analysis, control and evaluation solutions to support the Organic Dye-sensitized production process.

Fluid Control Material Analysis Film Deposition Procses Control/Thin Film Analysis DI Water Analysis/Waste Water Monitoring Chemical Solution Monitoring

Related products

Below you can see the different stages during the Organic Dry Sensidized production process. Please click on each phase in order to see the products that are avaialble to you during this stage.

Compact Process Gas Monitor MICROPOLE System

Compact process gas monitor using quadrupole mass spectrometer. Monitors trace gases, responds quickly to process shift . Easy to install and maintain.

Redirecting to Mass Flow Controllers page

LabRAM HR Evolution Raman Microscope

High spectral resolution analytical Raman microscope for ultimate performance and flexibility; includes UV Raman configuration, full automation and wide range of accessories.

XGT-7200

Single point analysis and automated hyperspectral imaging.

Dual vacuum modes.

Spot sizes from 1.2 mm to 10 µm.

Redirecting to Fluorescence Spectroscopy Solutions

Auto SE, Simple Thin Film Measurement Tool

Visualize your sample and measure thin film thickness and optical constants in seconds.

"With Auto SE, routine work will never be the same!"

NEW NIR Extended Spectral Range !

Uvisel 2

The ultimate solution to every challenge in thin film measurement

Automatic COD Monitor CODA-500

CODA-500: High-Performance Automatic CODMN Monitor Created Through Advanced Technology and More Than 30 Years of Accumulated Expertise

Highly Sensitive Silica Monitor SLIA-300

Measure the ultra-low density of silica at the finest sensitivity of 0.01 µg/L (0.01 ppb).

Dissolved Oxygen Monitor SD-300

Ever-increasing semiconductor circuit densities require higher-quality ultra-pure water for cleaning wafers.

Minute DO (dissolved oxygen) in ultra-pure water oxygenates the wafer surfaces. To ensure high-quality ultra-pure water, DO levels must be strictly controlled. Horiba's SD-300 DO Monitor is the solution.

Created utilizing Horiba's semiconductor technologies, it provides effective high-quality, pure-water management. The SD-300 DO Monitor is lightweight and portable. It can be carried anywhere, enabling high-precision measurement of DO levels in ultra-pure water in the semiconductor industry.

2-channel Carbon Sensor Resistivity Meter HE-960RW-GC(W)

Resistivity meter having the 2-channel carbon sensor. Measurement range: 0 - 100.0 MΩ・cm

A state-of-the-art model adopting 60 years of water measurement technology, which achieves a reduction in life cycle costs, and compliance with regulations and corporate compliance.

Carbon Sensor Conductivity Meter (High concentration type) HE-960HC

Wide range, carbon sensor conductivity meter for high concentration. Measurement rage: 0 - 1000 mS/cm

Industrial Resistivity Meter HE-480R

Compact resistivity meter for versatile porpose. Measurement range: 0 - 100.0 MΩ・cm

Low Concentration HF/HCl/NH3 Monitor HF-960M

High precision, high-speed measurement of low concentrations of HF, HCl, and NH3. Resistance sensor.

Chemical Solution Concentration Monitor CS-100 Series

Chemicals soulution concentration monitor has a compact profile, support for multi-bath, single-bath, and dingle-wafer cleaning systems