Conductivity meter (For low concentrations) CE-200C

Overview

High accuracy temperature compensation CPU, simultaneous display of conductivity and temperature, and utilization of platinum temperature measuring resistor in temperature compensation element combine to offer specifications ideally suited for highly accurate conductivity measurement of pure water. Moreover, an abundance of proven sensor groups are used to monitor the quality of pure water.

Features

Perfect for continuous measurement of pure water
Highly accurate temperature compensation
Automatic determination of sensor quality
Built-in temperature characteristics for each type of solution
Sensor lineup to match applications
Large customized LCD
Simultaneous display of measured values and parameter settings

Manufactured by HORIBA Advanced Techno

Specifications

Format	CE-200C
Measurement system	Electrode format (2-electrode system)
Measurement range	Measured range Cell constant 0.01: 1.00 / 2.00 / 5.00 / 10.00 µS / cm Cell constant 0.1 : 10.0 / 20.0 / 50.0 / 100.0 µS / cm Cell constant 1.0 : 100.0 / 200 / 500 / 1000 µS / cm
Temperature	0 - 100 °C (Measurement only)
Reproducibility	± 0.05 % / FS
Transmission output	DC 4 - 20 mA Input / output isolated, Maximum load resistance 500 Ω Linearity 0.5 % FS
Transmission output range	Conductivitynbsp; 1.00 / 2.00 / 5.00 / 10.0 µS / cm 20.0 / 50.0 / 100.0 / 200.0 µS / cm 500 / 1000 µS / cm
Adjustment function	1c contact output 2CH independent capacity: AC 250 V, 3 A max (Resistance load)
Control operation	ON / OFF Control: Upper limit operation (H) and lower limit operation (L) (Changeable with internal DIP switch)
Upper / lower limit setting range	Within each measurement range
Control width	Each range full scale 0 - 20 % (0 - ± 10 %)
Calibration function	Fine adjustment is possible based on the cell constant setting
Additional function	Each error message type Sensor diagnostics error (Temperature sensor short, Temperature sensor tripped) Measurement out-of-range error (Full scale over / under) System error (A/D converter defect, Memory anomaly) Transmission output during calibration Continuous, Hold (Previous value hold) Temperature calibration function
Temperature conversion coefficient arbitrary setting	0 - ± 5 % / °C
Standard temperature	25 °C (Arbitrary setting possible: 5 - 95 °C)
Temperature compensation coefficient	NaCl + ultra-pure water (1.00 µS / cm only when cell constant is 0.01) NaCl
Temperature compensation range	0 - 100 °C
Temperature compensation accuracy	± 1 % / FS
Temperature compensation element	Pt 1000 Ω (0 °C)
Ambient temperature & humidity	-5 - 50 °C, Less than 85 % RH
Power	AC 100 - 115 V 50 / 60 Hz 7 VA or AC 200 - 240 V 50 / 60 Hz 7 VA (Depends on setting)
Construction	Outside equipment: JIS C0920 Protection class: 3 (Rain-proof type) Installation procedure: 50 A pole or wall surface installation Case: Aluminum alloy casting (Paint color: DIC G-262 or equivalent) Full cover: Polycarbonate (Resin color: DIC G-262 or equivalent) Hood: SUS304 (Paint color: DIC G-262 or equivalent, or DIC PART2 2600 or equivalent) Mount fittings: SUS304
External dimensions	222 (W) x 180 (H) x 155 (D) (Mount fittings and protrusion not included)
Weight	Approx. 4 kg