LAQUAtwin Salt-22

Overview

Salinity Temperture  
Water proof Micro Volume   2-point calibration  

Features

The only pocket meter that directly measures sodium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B) and converts it into salinity or NaCl salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.

  • Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
  • Salinity, mV, and temperature display
  • Up to 2 calibration points
  • Auto calibration
  • Auto standard recognition: 0.5 & 5.0% NaCl (default)
  • Changeable high and low calibration values
  • Temperature calibration: 5 to 40.0 ºC
  • Auto stable / auto hold measurement
  • Auto power off: 30 mins.
  • Low battery indicator
  • IP67 Rating dust & waterproof
  • Replaceable sensor
  • 400 Hours battery life: continuous use without backlight
  • Material: ABS epoxy
  • Display: custom (monochrome) digital LCD with backlight
  • Operating conditions: 5 to 40 ºC, 85% or less relative humidity
  • Warranty: 2 years - meter; 6 months - sensor
  • Packed in handy carrying case
  • Supplied with 0.5% & 5.0% NaCl standards (14ml each), 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals   

Manufactured by HORIBA Advanced Techno

Specifications

Model

Salt-22

Measurement Principle

Ion Selective Electrode

Minimum Sample Volume

0.3ml (0.05ml with sampling sheet B)

Salinity Range

0.01 to 25% by weight

Resolution

0.00 to 0.99%: 0.01%

1.0 to 9.9%: 0.1%

10 to 25%: 1%

Calibration Points

Up to 2

Accuracy

±10% of reading value

Temperature Display

0 to 50.0 ºC

Temperature Calibration

5 to 40.0 ºC

Display

Custom (monochrome) digital LCD with backlight 

Operating Temperature

5 to 40.0 ºC

Operating Humidity

85% or less relative humidity (no condensation)

Power

CR2032 batteries (2)

Battery Life

Approx. 400 hours in continuous use without backlight

Material

ABS epoxy body

Dimensions

164 x 29 x 20 mm (excluding projections)

Mass

Approx. 55 g (including sensor and batteries)

Functions

  • Auto Calibration
  • Auto Standard Recognition
  • Changeable High & Low Calibration Values
  • Temperature Calibration
  • Auto Hold / Auto Stable Measurement
  • Switchable Backlight
  • Automatic Power Off (30mins)
  • Low Battery Indicator
  • IP67 Dust / Waterproof
  • Replaceable sensor