pH / ORP meter CP-200TP

Overview

The CP-200TP has a function that controls overshooting by varying not only the ON time (injection time), but also the cycle, as deviation becomes smaller.

Features

Built-in F-zone function (cycle independent variable function)
Common pH / ORP meter
One-touch calibration simply by immersing the electrode in standard solution and pressing the CAL key
Electrode characteristic quality determined automatically
Compatible with 5 types of temperature compensation elements
Can be combined with cleaning unit
Utilizes large customized LCD
Measured value and parameter setting displayed simultaneously

Manufactured by HORIBA Advanced Techno

Specifications

Format	CP-200TP
Measuring system	pH: Glass electrode measurement method ORP: Metal electrode measurement method
Measurement range	pH 0 14 : Resolution 0.01 pH ORP ± 200 mV : Resolution 1 mV
Reproducibility	pH ± 0.05 ORP ± 5 mV
Transmission output	DC 4 20 mA Input / output isolated, Maximum load resistance 500 Ω
Transmission output range	pH : 0 - 14, 0 - 10, 0 - 8, 2 - 12, 3 - 11, 4 - 14, 4 - 10, 6 - 14 ORP: ± 1400 mV, ± 1000 mV, ± 700 mV, ± 350 mV, -1000 - 0 mV, 0 - 1000 mV, ± 2000 mV, 0 - 700 mV (Changeable with internal DIG switch)
Adjustment function	1c contact output Independent 2CH Capacity: AC 250 V, 3 A max (Resistance load)
Control operation	Proportional time sharing ON / OFF Control: Upper limit operation (H) and lower limit operation (L) (Changeable with internal DIP switch) Upper / lower limit setting range : pH meter 0.00 - 14.00 pH, ORP meter 0 - ± 200 mV Proportional band : pH meter 0.00 4.00 pH (ON / OFF control when set to 0.00) ORP meter 0 400 mV (ON / OFF control when set to 0) Cycle : 5 - 300 seconds
Calibration function [pH only]	2-point automatic calibration or manual calibration (Select change using internal DIP switch)
Additional function	Each error message type Calibration error (Asymmetrical potential, sensitivity, response rate error, standard solution error) [pH only] Electrode diagnostic error Temperature sensor short, Temperature sensor tripped [pH only] Measurement out-of-range error Full scale over / under Hold contact input during cleaning (1a no-voltage contact input) [pH only] Warning output canceled when contact is ON Continuous transmission output during calibration or cleaning, Hold (Previous value hold, arbitrary hold) (Changeable with internal DIP switch) Measured value shift function pH: ± 2.00 pH ORP: ± 200 mV Input filter time constant switching function Time constant: None / Approx. 7 seconds (Changeable with internal DIP switch)
Temperature compensation element [pH only]	500 Ω (25 °C) Other Compatible with 6.8 kΩ (25 °C), 350 Ω (25 °C), 1 kΩ (0 °C), or 10 kΩ (25 °C) (Changeable with internal DIP switch)
Temperature compensation range [pH only]	0 - 100 °C (For pH meter)
Ambient temperature & humidity	-5 - 50 °C, Less than 85 % RH
Power	AC 100 115 V 50 / 60 Hz 7 VA or AC 200 240 V 50 / 60 Hz 7 VA (Depending on setting)
Construction	Outdoor installation type: JIS C0920 Protection class: 3 (rain-proof type) Installation procedure: 50 A pole or wall surface installation Case: Aluminum alloy casting (Paint color: DIC G-262 or equivalent) Full cover: Polycarbonate (Resin color: DIC G-262 or equivalent) Hood: SUS304 (Paint color: DIC G-262 or equivalent, or DIC PART2 2600 or equivalent) Mount fittings: SUS304
External dimensions	222 (W) x 180 (H) x 155 (D) (Mount fittings and protrusion not included)
Weight	Approx. 4 kg

Related Products

pH / ORP Meter CP-200

Outdoor setup is possible because it has a rainproof structure. In addition, it features a...

pH / ORP meter CP-250

The 250 series features a converter with built-in cleaning timer for practical use of functions...

Two- Line pH / ORP Meter CP-300

The CP-300 is the newest addition to our lineup of pH / ORP meters offering excellent stability and...