Process & Environmental

This residual chlorine meter realizes simultaneous display of measured values and parameter settings as well as a simplified calibration procedure including a zero calibration omission function and span calibration using low-concentration samples. This makes the CR-200 optimal for measurement of residual chlorine requiring stability and accuracy.

The IF-250 Simple Fluoride Ion Monitor for use in industry provides continuous measurements of the free fluoride ion concentration in waste water and other test samples using the fluoride ion electrode method.

The unit can be used on a range of test samples with varying concentrations from 0.0 to 10.0 mg / L up to 0 to 10,000 mg / L. This makes the IF-250 the ideal unit for monitoring the treatment of waste water and effluent resulting from the semiconductor production process, as well as electronic and glass factories using fluoride in the production process.

In addition to employing a measurement system that is resistant to soiling, the CSS-250 sludge concentration meter employs a new technology for the first time in the industry for containing a cleaning mechanism inside the probe. This makes it possible to prevent sludge and hair from becoming wrapped around and becoming entangled with the probe resulting in significant improvement in cleaning efficiency and ease of maintenance. In addition, the cleaning timer is built into the converter for realization of reduced total cost.

Experience HORIBA, the Global Single Source Solutions Provider with over 50 years...

New construction resolves many of the problems associated with the demanding usage environment for PM sampling filters.

The HD-480 industrial dissolved oxygen meter takes sequential measurements of the concentration of dissolved oxygen, which is an indicator used in the management of activated sludge tanks in waste water processing, and the quality of the water in boilers, or rivers and waterways.

As there is no need to exchange the membrane of the disposable sensor included, it is easy for anyone to use.

The HR-480 industrial residual chlorine meter takes sequential measurements of free residual chlorine, which is an indicator used in the inspection of the anti-bacterial properties of drinking water and swimming pools.

The sensor combined with uses a galvanic method with no drive section, making it highly maintainable, and producing stable measurements over a long period.

HORIBA designs, assembles, calibrates and tests complete integrated systems for simultaneously measuring multiple pollutants. A system for monitoring five pollutants can typically fit into one 19-inch rack. Rack-mounted systems...

A state-of-the-art model adopting 60 years of water measurement technology, which achieves a reduction in life cycle costs, and compliance with regulations and corporate compliance.

The TX-100 Tunable Laser Gas Analyzer simultaneously measures the hydrogen chloride and H2O of the stack gas. Since the single probe method is applied in the optical system of the analyzer, TX-100 can be mounted from...

The CP-300 is the newest addition to our lineup of pH / ORP meters offering excellent stability and temperature characteristics. The CP-300 is capable of accommodating a wide range of application fields from general wastewater monitoring to pH measurement of industrial processes.

U-50 series Multi-parameter water quality checker enables to measure and indicate the monitoring result simultaneously up to 11 parameters with one unit.

Multi-Component Gas Analyzer VA-5000 Series is an all-round analyzer that fits today’s measurement needs ...

The HQ-300 is multiparameter transmitter(1 component can be selected from pH,ORP,dissolved oxygen(DO),fluoride ion*,electrical conductivity and electrical resistivity) with the latest HART communication(protocol revision7).

*Fluoride ion is optional.

HORIBA’s compact designed Zero Gas Generator ZNV-7 is used for mobile, stationary or laboratory scale zero point checking & diluting span gas sources for the calibration of ambient air analyzers.