Scientific
for W-20XD series (250mL)
Inner fluid
Replacement electrode tip for combination and half-cell calcium ion electrodes
for automatic calibration
for automatic calibration
Option for W-20XD seriesMulti-probe guard or Flow Through Cell can only be stored in W-2030
Laboratory CrimeScope Digital Imaging System, basic package for fingerprint work.
Laboratory CrimeScope Digital Imaging System and Mini-AFIS-APIS, FULL package for Fingerprint work.
Laboratory CrimeScope Digital Imaging System, for Fingerprint and Forged Documents work.
The CFD-2G is a hybrid amplifier-discriminator module designed for use with a wide variety of single photon detectors. It is neatly packaged to allow positioning close to the detector in order to minimise signal degradation, and features USB interface for simplified configuration.
Replacement electrode tip for combination and half-cell chloride ion electrodes
for W-23XD/U-10 series (50mL)
Inner fluid
for W-23XD series
Replacement chips for the ion sensors
for W-20XD series
Should be diluted when used. The pH values shown are those obtained when the original solution is diluted with pure water at a volume ratio of 1 to 4. For general use.
Should be diluted when used. The pH values shown are those obtained when the original solution is diluted with pure water at a volume ratio of 1 to 4. For general use.
Should be diluted when used. The pH values shown are those obtained when the original solution is diluted with pure water at a volume ratio of 1 to 4. For general use.
Model No: 503-S
84 uS/cm Conductivity Solution at 25°C 250ml
1413 uS/cm Conductivity Solution at 25°C 250ml
12.88 mS/cm Conductivity Solution at 25°C 250ml
111.8 mS/cm Conductivity Solution at 25°C 250ml
The CP-140 Imaging Spectrograph offers the OEM customer a sturdy, low-cost, f/2, modular instrument, with unsurpassed spatial resolution.
The CP20 miniature spectrograph is available with a choice of solid state array detectors. Designed for OEM applications, it will fit into small, hand-held, portable instruments or can take the place of larger spectrometers where space is at a premium.
The CP30 miniature spectrograph is available with a choice of solid state array detectors. Designed for OEM applications, it will fit into small, hand-held, portable instruments or can take the place of larger spectrometers where space is at a premium.
The CP40 miniature spectrograph is available with a choice of solid state array detectors. Designed for OEM applications, it will fit into small, hand-held, portable instruments or can take the place of larger spectrometers where space is at a premium.
The CP60 miniature spectrograph is available with a choice of solid state array detectors. Designed for OEM applications, it will fit into small, hand-held, portable instruments or can take the place of larger spectrometers where space is at a premium.
The CPD40 miniature spectrograph is available with a choice of solid state array detectors. Designed for OEM applications, it will fit into small, hand-held, portable instruments or can take the place of larger spectrometers where space is at a premium. The CPD40 allows the use of one detector array with two input channels.
The CS-16-500 was designed for those departments that prefer Xenon 500W lamps to Metal Halide Lamps because of the extra Infrared output for forged documents.
The CT-300 series of CCD spectrometers are high throughput/sensitivity systems, which use back-thinned CCDs and can be configured with 10 to 20 fiber input channels (800 micron diameter fibers), running in a combination of sequential and simultaneous modes. The Visible spectral coverage is the standard configuration. Compared with interline based CCDs, the CT-300 range of CCD detectors provide Dynamic Ranges of 7000:1 and beyond, and SNR of 500:1 (Shot noise conditions). The slit width is customized to attain the proper spectral resolution.
Other ranges of coverage can be reached by customization for OEM volume applications, according to the selected fiber diameter.
Available for OEM customers only.
Revolutionary waterproof meter and electrodes enhance care-free operation in the lab or field.
Quick connection to PC allows easy and fast data evaluation.
D-51Economical meter for pH and temperature.
D-52Multi-parameter meter...
Digi-PrintScope System for Biology with 12 Longpass/Bandpass Filters & WSQ Compression Software (no Slide/Hood)
DigiScope for Fingerprint Fluorescence Capture with 4 filters on 1 slide and software
DigiScope for Fingerprint Fluorescence Capture with 8 filters on 2 slides and software
HORIBA Scientific decay analysis software recovers kinetic information (such as fluorescence lifetime and rotational correlation times) from luminescence decay data by fitting the raw decay data to one of a selection of kinetic models.
DataStation is the latest measurement environment for time-domain fluorescence and is supplied with all HORIBA Scientific lifetime systems.
DeltaDiodes utilize laser diode and LED technology to generate short optical pulses over a very wide range of repetition rates and wavelengths. Optical pulses as short as 50ps can be generated at repetition rates up to 100MHz.
The DeltaFlex TCSPC system is one of our Delta series of next generation TCSPC lifetime instrumentation. The DeltaFlex offers the ultimate in flexibility:
Firstly, this system is designed for the measurement of luminescence...
The DeltaPro has taken the complexity of time-correlated single photon counting (TCSPC) and made it simple and affordable so that any lab can exploit the power of fluorescence dynamics using TCSPC. This system enables the...
The DeltaTime TCSPC lifetime plug-in offers acquisition speed, flexibility, and affordability unavailable in any other hybrid fluorescence solution available. DeltaTime seamlessly integrates monochromators, polarizers, and other accessories with the widest array of sources (LEDs, laser diodes, supercontinuum lasers) and detectors (including NIR), providing lifetime coverage from 25ps to 1sec over wavelengths spanning the UV to NIR.
Automated UV-VIS Spectroscopic Reflectometer - Spectroscopic Reflectometer platform - Spectral Range 400 - 800 nm
Waterproof. Uses a thermistor with a disposable ship-type electrode 5401 as the thermometric element.
A DO electrode exclusively for DO-8F.This is a disposable chip type electrode (7541), which uses a detachable stirrer and a precision platinum resistance bulb for its temperature measuring element.
for U-50 serise (50mL)
for U-50 series
for W-23XD/U-20 (Apporx. 50 times)
including:
Diahragm sheets 10 sheets
Diahragm retaining ring 5 pcs
O-ring (S9) 5pcs
Internal solution #305 (50mL) 1 bottle
Diahragm retaining plate 1 pc
Replacement stand 1 pc
Syringe and needle 1 set
Operatio manual 1 sheet
for U-50 series
The world’s only CCD-based benchtop spectrofluorometer with a built-in UV-VIS spectrophotometer.
DynaMyc is the user friendly instrument for investigating dynamic events in microscopic samples, such as energy transfer and molecular binding. HORIBA Scientific, leader in fluorescence spectroscopy, offers an advanced system to apply time resolved fluorescence spectroscopy on the micron-scale.
The electrode adapter provides secure attachment for two electrodes so that they can be easily placed together in solutions.
For removing inorganic sample residues from glass electrodes, and for cleaning liquid junctions
For removing inorganic and organic residues from the glass membrane of pH electrodes
Cleaning Solution for Protein sample. (400mL)
For soy sauce, yogurt, butter, cheese milk, meat, beer, jam Enzyme solution agar pharmaceutical formulations source, ketchup, mayonnaise
5 pcs/packFor 9621-10D/9625-10D/9615S-10D/9618S-10D/9681S-10D/6367-10D/6377-10D/6252-10D/9630-10D/9631-10D/9632-10D/6261-10C/1066A-10C/1076A-10C/2060A-10T/9300-10D/3552-10D
The HORIBA EMGA-600 is a combined model between ON and H analyzers and determines the oxygen, nitrogen and hydrogen contained in ferrous and non-ferrous metals, semiconductors, electronic materials and so on using the inert gas fusion method.
This is an oxygen and nitrogen elemental analyzer with high accuracy and repeatability suiting to cutting-edge technology's R&D as well as quality control in the market of steel, new materials, catalyst and so on. This is a new generation model optimized to fit to user's requests.
The HORIBA EMGA-921 determines the hydrogen contained in ferrous metals, non-ferrous metals, semiconductors, or electronic materials using the inert gas fusion method and column separation. The Hydrogen is measured by a thermal conductivity detector.
EMGA-930 is a simultaneous Oxygen/Nitrogen/Hydrogen Analyzer with high accuracy and repeatability suited to advanced R&D as well as quality control. It determines the O/N/H contained in ferrous and non-ferrous metals, ceramics, new materials, electronic materials and other inorganic materials using the inert gas fusion method.
EMIA-8100 series equipped with electrical resistance furnace measures carbon and sulfur contained in such inorganic substances as ceramics and cement, such fuels as coal and heavy oil, and such high-purity metals and electronics...
Standard Model: EMIA-Pro
Enables everyone to become a professional analyst
EMAX ENERGY combined with SEM is an energy dispersive X-ray analyzer which is suited for foreign material and composition analysis. It matches the samples in many applications.
Analyzer is designed to provide pertinent...