Low-cost Reticle/Mask Particle Detection System PR-PD5

Overview

The PR-PD5 has been designed so that it can be integrated with any other system as a apace-saving measure. Installing the PR-PD5 to the conveyor, or the reticle stocker, allows the performance of simultaneous inspection, while combining it with the cleaning device enables inspection during the cleaning process.

Features

  • Reticle inversion mechanism
  • 0.5μm to 50μm selectability
  • Single detection system
  • Built-in and combination types

Manufactured by HORIBA

Specifications

Inspection object

Particles on reticle/mask with or without pellicle

Principle

Laser scattering method

Detectable particle size

Pattern surface: 0.5 µm, Glass surface: 5.0 µm, Pellicle surface: 10.0 µm (* PSL equivalent)

Inspection result

Data mapping display on the FPD

 

Utilities

Installation site

Clean room or clean booth, class 100 or better

Temperature

23 ±1°C

Power

100 to 230 V AC, 7.5 to 5 A, 50/60 Hz, single phase