Fuel Cell Evaluation

HORIBA supports customers' development and production of fuel cells (FC) with a wide range of technologies from material evaluation to production process and performance evaluation of cells and stacks.

A fuel cell is a device that generates electricity through a chemical reaction between hydrogen (H2) and oxygen (O2). Fuel cells are classified into two types according to their power generation principle and operating temperature: low-temperature fuel cells and high-temperature fuel cells. The low temperature type is called Polymer Electrolyte Fuel Cell (PEFC), and the high temperature type is called Solid Oxide Fuel Cell (SOFC). There are also "mobile" fuel cells installed in Fuel Cell Electric Vehicles (FCV or FCEV) and "stationary" fuel cells installed in homes and factories.

Table of Contents

"Measurement and Analysis" Required for Fuel Cell Evaluation

To improve the performance, reliability, and durability of fuel cells, a wide range of evaluations are required, from electrochemical measurements during power generation, analysis of each component after power generation is completed, to evaluation of the physical properties of each component. In addition, since the characteristics required of fuel cells vary depending on the application, it is necessary to analyze, measure, and evaluate fuel cells under a variety of conditions.

Material Analysis (Catalysts, Separators, Electrode Materials, etc.)

We offer various analytical instruments for research and development of advanced materials. The physical properties of materials such as catalysts, electrolytes and separators for fuel cells can be evaluated using a variety of analytical methods.

HORIBA Solution >>
Applications for Energy

 

Performance Evaluation of Fuel Cells

Our fuel cell test stations the Evaluator Series are ideal for testing and evaluating from single cell to full stack and fuel cell systems. In addition to performance evaluation, durability evaluation and accelerated degradation tests are performed based on high safety standards.

Also, Hydrogen Gas Analyzer HyEVO can evaluate fuel cell performance by measuring unreacted hydrogen gas that permeates (cross leaks) through the electrolyte membrane.

HORIBA Solutions >>
Fuel Cell Test Station Evaluator Series
Hydrogen Gas Analyzer HyEVO

Monitoring of fuel cell degradation with pH of generated water

Monitoring of fuel cell degradation with pH of generated water

Fuel Cell Degradation Monitoring

Fuel cells generates water during power generation. The pH value (acidity/alkalinity) of this generated water changes due to degradation of the electrolyte membrane and corrosion of the metal separator. By monitoring the pH value of the generated water, the degradation state of the fuel cell materials can be determined.

By measuring the water quality in the exhausted condensate and the CO2 in the exhaust gas, the degree of degradation of the fuel cell also can be evaluated.

HORIBA Solutions >>
Micro Volume pH Monitor UP-100
Ambient Carbon Dioxide (CO2) Monitor APCA-370

Mixed Gas Generation and Flow Control

In the development of fuel cells, mixed gases under various conditions are simulatively created, and the gas flow is controlled and supplied to the fuel cell for testing and evaluation. This requires high-precision vaporization, mixing, and flow control equipment. HORIBA has flow control technology, which is also used in semiconductor processes, and supports fuel cell development and testing with accurate control of gas concentration and humidity. For more information, please click here.

HORIBA Solutions >>
For controlling H2/O2/ N2 gas flow precisely: Digital Mass Flow Controller SEC-N100
For controlling and monitoring the pressure in the line: Auto Pressure Regulator UR-Z700
For measuring H2O for humidification control: Liquid Mass Flow Meter LF-F20
For monitoring line pressure: Capacitance Manometer (pressure sensor) VG-200S (Please ask)


Engineering Support

Consultation for Analysis and Contract Analysis Services

We have a long-standing commitment to complimentary sample analysis towards the evaluation of advanced materials. Each submission is measured by a highly-trained member of the Applications Lab and presented as a formal lab report complete with method, observations, results, and data interpretation assistance.

Analysis Centers and Services


Find Us on YouTube

HORIBA Green Hydrogen Solutions

Material Characterization - Solutions for Electrification Development and Testing by HORIBA

Application Laboratory Virtual Tour

Related Information on Hydrogen Energy

留言咨询

如您有任何疑问,请在此留下详细需求信息,我们将竭诚为您服务。