
粒度表征
LA-910 Bibliography
LA-910
Lightweight, High-opacity Paper by Fiber Loading: Filler Comparison |
Hydrothermal Synthesis and Structural Characterization of BaTiO3 nanocrystals |
PET Polyester Resins Used in the Wet End at Neutral-Ackaline Papermaking Conditions |
Aqueous Cleaner Filtration Study |
Novel Lightweight, High-Opacity Papers Made from Mechanical Pulps |
Photodegradation of carboxylic acids on Pr6O11 surface. Enhancement by semiconductors |
Preparation of porous lanthanum phosphate with templates |
Wear mechanism in automotive brake materials, wear debris and its potential environmental impact |
Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: Preliminary study (I) |
Influence of Molecular Character of Chitosan on the Adsorption of Chitosan to Oil Droplet Interfaces in an In Vitro Digestion Model |
Comparison of receptor models for source apportionment of the PM10 in Zaragoza (Spain) |
Particle separation efficiency in two 10-mm hydrocyclones in series |
Effects of silver oxalate additions on the physical characteristics of low-temperature-curing MOD silver paste for thick-film applications |
Enhancement of oral bioavailability of an HIV-attachment inhibitor by nanosizing and amorphous formulation approaches |
Mineral induced mechanochemical degradation: The imazaquin case |
Cation distribution in the Bi4 − xRExTi3O12 (RE = La, Nd) solid solution and Curie temperature dependence |
Degradation of carboxylic acids on Y2O3 surface under UV light. Synergism by semiconductors |
Photo degradation of phenol on Y2O3 surface: Synergism by semiconductors |
Phenol degradation on Pr6O11 surface under UV-A light. Synergistic photocatalysis by semiconductors |
Rhodamine-conjugated acrylamide polymers exhibiting selective fluorescence enhancement at specific temperature ranges |
Synthesis and characterization of LaNiO3-based platinum catalyst for methanol oxidation |
New experimental constraints on the composition and structure of tholins |
Semiconductor-catalyzed degradation of phenols with sunlight |
Mechanism of centrifugal filtration for separation of microbe/protein bio-suspension |
Effects of milling condition on the formation of core?shell structure in BaTiO3 grains |
Diagnosis of trace metal contamination in sediments: The example of Ensenada and ElSauzal, two harbors in Baja California, Mexico |
Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete |
Characteristics of polymers enabling nano-comminution of water-insoluble drugs |
Photocatalytic performance of particulate semiconductors under natural sunshine - Oxidation of carboxylic acids |
Photo oxidation of iodide ion on immobilized semiconductor powders |
Understanding a relaxation behavior in a nanoparticle suspension for drug delivery applications |
Detonation synthesized nanodiamond powder for the preparation of porous polycrystalline micron powders |
Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing |
Preparation and acidic properties of nano-porous lanthanum phosphate by the addition of urea |
TULA proteins bind to ABCE-1, a host factor of HIV-1 assembly, and inhibit HIV-1 biogenesis in a UBA-dependent fashion |
Humidity sensing and electrical properties of Na- and K-montmorillonite |
Synthesis and characterization of iron aluminide nanoparticles by DC thermal plasma jet |
Disruption and sedimentation of casein micelles and casein micelle isolates under high-pressure homogenization |
Electrical and optical properties of Jäger-nickel (II)-based molecular-material thin films prepared by the vacuum thermal evaporation technique |
Evaluation of bagasse ash as supplementary cementitious material |
Frequency and sources of basin floor turbidites in alfonso basin, Gulf of California, Mexico: Products of slope failures |
Improvement of acid and base resistance of nickel phosphate pigment by the addition of lanthanum cation |
Semiconductor-catalyzed solar photooxidation of iodide ion |
Synthesis, characterization and photocatalytic property of nanostructured Al-doped ZnO powders prepared by spray pyrolysis |
Mesoporous carbide-derived carbon with porosity tuned for efficient adsorption of cytokines |
The purification of protein in cross-flow microfiltration of microbe/protein mixtures |
Performance of intermediate temperature (600/800 °C) solid oxide fuel cell based on Sr and Mg doped lanthanum-gallate electrolyte |
Biocidal effects of photocatalytic semiconductor TiO2 |
Influence of partial substitution of Cu for Co on the thermoelectric properties of NaCo2O4 |
Facile fabrication of poly(p-phenylene ethynylene)/colloidal silica composite for nucleic acid detection |
Mechanochemical reforming of nickel pyrophosphate |
Effect of embedded metal compound on porosity of silica colloids prepared by spray reaction of silicon tetrachloride |
Critical freezing rate in freeze drying nanocrystal dispersions |
Additional effects of rare earth elements on formation and properties of some transition metal pyrophosphates |
Enzyme-based additives for paints and coatings |
The preparation and filtration characteristics of Dextran - MnO2 gel particles |
Phase transition in barium titanate nanocrystals by chemical treatment |
Surfactant-stabilized contrast agent on the nanoscale for diagnostic ultra sound imaging |
Sintering behaviors of bismuth titanate synthesized by a coprecipitation method |
Experimental design and results from the preparation of precursory powders of ZrO2(3%Y2O3)/(10?95)% Al2O3 composite |
Emissions of fine particles, NOx, and CO from on-road vehicles in Finland |
A phenomenological description of the rate of the aluminum/oxygen reaction in the reaction-bonding of alumina |
Role of polymeric stabilizers for drug nanocrystal dispersions |
Azlactone-reactive polymer supports for immobilizing synthetically useful enzymes. II. Important preliminary hydrogen bonding effects in the covalent coupling of Penicillin GAcylase |
Inhibition of photooxidation of iron(II) by some semiconductors |
Addition of rare earth cation on formation and properties of various cobalt phosphates |
Particle velocity and particle clustering in down-flow reactors |
The role of biopharmaceutics in the development of a clinical nanoparticle formulation of MK-0869: a Beagle dog model predicts improved bioavailability and diminished food effect on absorption in human |
Effect of shell type on the in vivo backscatter from polymer-encapsulated microbubbles |
Photoluminescent properties of Y2O3:Eu3+ phosphors prepared via urea precipitation in non-aqueous solution |
Effects of modified corn gluten meal on quality characteristics of a model emulsified meat product |
Development and characterization of a nano-scale contrast agent |
Influence of surface-active agents on pore characteristics of the generated spherical resorcinol-formaldehyde based carbon aerogels |
Size control and characterization of spherical carbon aerogel particles from resorcinol-formaldehyde resin |
Database for the Microstructure of Plated Films |
Mechanochemical effects on synthesis and properties of manganese-neodymium diphosphates |
Critical zeta potential and the Hamaker constant of oxides in water |
The sustained granulopoietic effect of progenipoietin encapsulated in multivesicular liposomes |
Analysis of silica fume produced by zircon desilication |
Growth of In2O3(ZnO)5 platelet micro-crystals by flux methods |
Modulation of the sustained delivery of myelopoietin (Leridistim) encapsulated in multivesicular liposomes (DepoFoam) |
Silica removal performance of seed from geothermal fluids |
Nanosizing: a formulation approach for poorly-water-soluble compounds |
Direct and indirect induction of apoptosis in human mesenchymal stem cells in response to titanium particles |
Zinc-rich powder coatings corrosion in sea water: influence of conductive pigments |
Characterization of zinc-rich powder coatings by EIS and Raman spectroscopy |
Characterization of the structures of poly(urea?urethane) microcapsules |
The transformation of LiAlO2 crystal structure in molten Li/K carbonate |
Preparation and characterization of LiNi0.7Co0.2Ti0.05M0.05O2 (M=Mg, Al and Zn) systems as cathode materials for lithium batteries |
Clay dispersal and the geochemistry of manganese in the Northern Gulf of California |
Energetics of anhydrite, barite, celestine, and anglesite: a high-temperature and differential scanning calorimetry study |
Sustained-delivery of an apolipoproteinE?peptidomimetic using multivesicular liposomes lowers serum cholesterol levels |
Preparation of hydrogen storage alloys for applications of hydrogen storage and transportation |
Temperature, cycling, discharge current and self-discharge electrochemical studies to evaluate the performance of a pellet metal-hydride electrode |
Application of electrodes modified with ion-exchange polymers for the amperometric detection of non-redox cations and anions in combination to ion chromatography |
DepoFoam technology: a vehicle for controlled delivery of protein and peptide drugs |
Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying |
Interdependence between green compact property and powder agglomeration and their relation to the sintering behaviour of zirconia powder |
Prediction of the amount of PCA for mechanical milling |
Improving the magnetic properties of hydrothermally synthesized barium ferrite |
Lipopeptide particles as the immunologically active component of CTL inducing vaccines |
Fabricating densified hydroxyapatite ceramics from a precipitated precursor |
Synthesis and characterization of ultrafine lead zirconate powders |
Shear yield stress of flocculated alumina?zirconia mixed suspensions: effect of solid loading, composition and particle size distribution |
Synthesis of lead zirconate powders via a polyaniline-mediated microemulsion processing route |
Low temperature synthesis of PZT powders via microemulsion processing |
Highly sensitive discrimination of taste of milk with homogenization treatment using a taste sensor |
The use of a circulating fluidized bed absorber for the control of sulfur dioxide emissions by calcium oxide sorbent via in situ hydration |
Single crystals for radiation detectors |
The dissolution of scorodite in gypsum-saturated waters: Evidence of Ca-Fe-AsO4 mineral formation and its impact on arsenic retention |
The incongruent dissolution of scorodite ? Solubility, kinetics and mechanism |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |
LA-910 & LA-920
Effect of surface-active stabilizers on the surface properties of coconut milk emulsions |
Improvement of gas-cyclone performance by use of local fluid flow control method |
Structure and electromagnetic characteristics of flaky FeSiAl powders made by melt-quenching |
Effect of dispersing and stabilizing additives on rheological characteristics of the upgraded brown coal water mixture |
Gypsum crystallization and hydrochloric acid regeneration by reaction of calcium chloride solution with sulfuric acid |
Powder metallurgy magnesium composite with magnesium silicide in using rice husk silica particles |
Oxide coatings on Y3Al5O12:Tb3+ particles |
Effect of surface-active stabilizers on the microstructure and stability of coconut milk emulsions |
Effect of type of peroxide on cross-linking of poly(l-lactide) |
Liquid-liquid extraction for efficient synthesis and separation by utilizing micro spaces |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Carbon nanotubes synergistically enhance photocatalytic activity of TiO2 |
All solid battery with phosphate compounds made through sintering process |
Hybridized synergy effect among TiO2, Pt and graphite silica on photocatalytic hydrogen production from water-methanol solution |
Gas transfer kinetics and redox potential considerations in oxidative precipitation of manganese from an industrial zinc sulphate solution with SO2/O2 |
Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology |
Factors governing survival of black willow (Salix nigra) cuttings in a streambank restoration project |
Distribution patterns of octylphenol and nonylphenol in the aquatic system at Mai Po Marshes Nature Reserve, a subtropical estuarine wetland in Hong Kong |
Oligomethylene spacer length dependent interaction of synthetic galactolipids incorporated in phospholipid layers with ricin |
Influence of mass transfer resistance on overall nitrate removal rate in upflow sludge bed reactors |
Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant |
Particle separation performance by use of electrical hydro-cyclone |
Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys |
Macroporous ZrO2 ceramics prepared from colloidally stable nanoparticles building blocks and organic templates |
LiVOPO4 as a new cathode materials for Li-ion rechargeable battery |
Influence of metal oxides on PCDD/Fs formation from pentachlorophenol |
Zeolite-carbon composites prepared from industrial wastes: (I) Effects of processing parameters |
Preparation of CuIn(S,Se)2 by mechanochemical process |
Effect of thermal treatments on the properties of coconut milk emulsions prepared with surface-active stabilizers |
Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery |
Pre-evaluation method for the spectroscopic properties of YAG bulk materials by so-gel synthetic YAG powder |
Continuous fine particle classification by water elutriator with applied electro-potential |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell |
Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO-YSZ slurry |
Nanocrystalline eutectic Al-Si alloy produced by cryomilling |
Effects of addition of food by-products on the fermentation quality of a total mixed ration with whole crop rice and its digestibility, preference, and rumen fermentation in sheep |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and bone powder |
Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO |
Size distributions of manure particles released under simulated rainfall |
Synthesis and characterisation of nano-composite copper oxalate powders by a surfactant-free stripping-precipitation process |
Crystal alignment of graphite as a negative electrode material of the lithium-ion secondary batteries |
Influence of arsenate species on the formation of Fe(III) oxyhydroxides and Fe(II-III) hydroxychloride |
Characteristics of polyimide/barium titanate composite films |
Highly Crosslinked Vs Conventional Polyethylene Particles: Relative In Vivo Inflammatory Response |
Cuttleboneas reinforcing filler for natural rubber |
Radiation-induced grafting of styrene onto ultra-high molecular weight polyethylene powder and subsequent film fabrication for application as polymer electrolyte membranes:I. Influence of grafting conditions |
Container effects on the physicochemical properties of parenteral lipid emulsions |
Effect of pH of fine silica suspension and central rod diameter on the cut size of an electrical hydrocyclone with and without underflow |
Chemical mechanical planarization of copper using transition alumina nanoparticles |
Precursor effects on ZrW2O8 formation kinetics |
Physicochemical stability of phospholipid-dispersed suspensions of crystalline itraconazole |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Impacts of post-glacial lake drainage events and revised chronology of the Champlain Sea episode 13-9 ka |
Influence of carbon content and particle dispersion on radiation properties of coalchars |
Photocatalytic hydrogen production enhanced by laser ablation in water-methanol mixture containing titanium(IV) oxide and graphite silica |
Synthesis of BaTiO3 powders by a ball milling-assisted hydrothermal reaction |
Preparation of ceria with large particle size and high appearance density |
Mutation of the maize sbe1a and ae genes alters morphology and physical behavior of wx-type endosperm starch granules |
The effect of nutrient addition on metal tolerance in Salvinia herzogii |
Physicochemical stability of lipid injectable emulsions: Correlating changes in large globule distributions with phase separation behavior |
Optimization of silica-based media for antibody purification by protein A affinity chromatography |
The incongruent dissolution of scorodite ? Solubility, kinetics and mechanism |
Synthesis and evaluation of Zr0.5Ti0.5B2 solid solution |
Role of phosphate species during the formation and transformation of the Fe(II-III) hydroxycarbonate green rust |
Orbital-and millennial-scale variations in Asian dust transport path to the Japan Sea |
The effect of biomass characteristics on the partitioning and sorption hysteresis of 17α-ethinylestradiol |
Self-propagating high-temperature synthesis of La(Sr)Ga(Mg)O3−δ for electrolyte of solid oxide fuel cells |
The orientation mechanism of (Ca,Sr)Bi4Ti4O15 ceramics prepared by slip casting in high magnetic field and subsequent sintering |
Sulfidation treatment of copper-containing plating sludge towards copper resource recovery |
Analysis of effluent gases during the CCVD growth of multi-wall carbon nanotubes from acetylene |
Single enzyme nanoparticles in nanoporous silica: A hierarchical approach to enzyme stabilization and immobilization |
Effect of aqueous composition on the freeze-thaw stability of emulsions |
Recovery of bitumen from oilsands: gelation of ultra-fine clay in the primary separation vessel |
Thickening properties and emulsification mechanisms of new derivatives of polysaccharides in aqueous solution |
LA-910 & LA-950
The Thermal Decomposition of Carbohydrates. Part II. The Decomposition of Starch |
Sustained release subcutaneous delivery of BMS-686117, a GLP-1 receptor peptide agonist, via a zinc adduct |
Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials - the influence of bismuth |
Particulate matter < 10 μm (PM10) and total suspended particulates (TSP) in urban, rural and alpine air in Switzerland |
Crystallization of Nb3Sn from solution in a niobium tube |
LA-910, LA-920 & LA-930
A multi-proxy study of Argentina loess: Marine oxygen isotope stage 4 and 5 environmental record from pedogenic hematite |
A 1500-year record of temperature and glacial response inferred from varved Iceberg Lake, south central Alaska |
LA-910, LA-920 & LA-950
Microbial activity in a combined UASB - activated sludge reactor system |
Catalytic treating of gas pollutants over cobalt catalyst supported on porous carbons derived from rice husk and carbon nanotube |
Anion effects on electrostatic charging of sterically stabilized, water insoluble drug particles |
Late Quaternary hydroclimatology of a hyper-arid Andean watershed: Climate change, floods, and hydrologic responses to the El Niño-Southern Oscillation in the Atacama Desert |
Influencing effect of intra-granule mass transfer in expanded granular sludge-bed reactors treating an inhibitory substrate |
Deducing source rock lithology from detrital rutile geochemistry: An example from the Erzgebirge, Germany |
Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data |
Millennial-scale changes in terrestrial sediment input and Holocene surface hydrography in the northern South China Sea (IMAGES MD972146) |
Firesides lagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels |
LA-910, LA-930 & LA-950
Tests of cesium iodide crystals for an electromagnetic calorimeter |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |