LA-960V2激光粒度仪
概要
The most high-end class accurate and reliable laser diffraction particle sizing instrument HORIBA Partica LA-960 has been upgraded to the LA-960V2. HORIBA particle sizing instrument recognized as its strong point of submicron range measurement capability and the new model includes these advantages with some new features. HORIBA’s experience in the use of data algorithms has evolved to meet the expectations of the customer demanding the highest accuracy and resolution.
特征
- Latest Technology and Highest Performance
The dynamic wide measurement range; 0.01- 5000 microns (up to 3000 microns for wet method)
The LA-960 incorporates the previous strengths over a broader range of sizes. 3 dimensional data simulation which generates scattered light patterns for HORIBA original optical layout are used for the calculation.
The results can be compared with the theoretical results including all the optical component parameter effects. The comparison allows for the selection of the best approach of the size and distributions. Certified samples as small as 20 nm can be handled by the new algorithms.
- Performance Guaranty
- Guaranteed high data accuracy of ±0.6%
- ISO13320 compliance
- Traceability support
As well as the data accuracy and reproducibility assurances, the instrument-to-instrument are confirmed with standards for each analyzer. The testing material is poly-dispersed standard of glass beads with over one decade of distribution.
- World wide user accepted quality
HORIBA has focused on the product quality of the most essential key part of the instrument; the light source and detector alignment. The circulation system efficiency, speedy operation and easy maintenance are based on the requirements from the various users of high-tech research laboratories and quality controlling managements. We also offer some different maintenance support programs after the sale depending on the user’s intended use, analysis circumstance and operational frequency. - Optical Component & Sample Preparationn System
The optical component and sample preparation system (Circulation system) unified model that enables smooth and productive analysis operations.
- Evolutionary Advance of the LA Series Software
- All at a glance GUI design! Easy and functional screen layout
Method expert function generates appropriate measurement conditions and reviews each analysis. Flexible automatic measurement design and settings enable user friendly operations.
- Data correlation software available; LA-920, LA-950 and LA-950V2
- All at a glance GUI design! Easy and functional screen layout
制造: HORIBA
規格
Measurement Method | Mie Scattering Theory |
|---|---|
Measurement Range | 0.01 μm to 5000 μm |
Measurement Time | 1 minute from dispersion liquid filling to measurement and rinse. |
Sampling System | Required Sample Amount：Sample 10 mg to 5 g (Depends on sample material) |
Optical System | Light Source：650 nm Laser Diode approx. 5.0 mW |
Circulation System | Ultrasonic Probe：Frequency 20 kHz 7-Level selections |
Power Supply | 120 V AC ±10% or 230 V AC ±10%, 50/60 Hz ±1% |
Power Consumption | 300 VA |
Operating Temperature | 15 to 35℃ (59 to 95℉) |
Operating Humidity | Relative Humidity 85% or less (no condensation) |
External Dimensions | 705 x 565 x 500 mm (28 x 23 x 20 in) |
Mass Approx | 56 kg (123 lb) |
Dry Feeder Accessory
Dispersion Method | Injector-driven forced dispersion in air, using compressed air |
|---|---|
Sample Supply Method | Vibrating feeder |
Sample Ejection Method | Vacuum-driven forced ejection |
Sample Concentration Adjustment Method | Adjusted by feeder vibration power |
Control Method | Serial communication with LA-960 measurement unit |
Controlled Items | Feeder vibration power alteration (automatic or user-set), vacuum ON/OFF, compressed air valve ON/OFF, pressure is adjustable |
Measurement Time | Normally about 2 seconds from start of measurement |
Operating Temperature / Humidity | 15 to 35℃, 85% RH max. (no condensation) (59 to 95℉) |
Outer Dimensions | 332 mm x 321 mm x 244 mm (13 x 13 x 10 in) |
Power Supply | AC 100/120/230V, 50/60 Hz, 1500 VA |
Compressed Air Pressure | 0.5 MPa to 0.8 MPa |
Compressed Air Supply Port | Quick connector for resin tube with 6 mm outer diameter |
产品相关图及其它
备件
Components | LA-960N | LA-960A | LA-960S | LA-960W | LA-960L | |
|---|---|---|---|---|---|---|
Optics | Standard optical system | • | • | • | • | • |
Aqua type Ethanol can be used as a dispersing additive. （0.01 - 3000μm） | Standard circulation system | - | • | - | - | - |
Pressurized fill adapter | - | - | - | • | - | |
Liter flow | - | - | - | - | • | |
Peristaltic pump system | - | - | - | • | - | |
Solvent type （0.01 - 3000μm） | Standard pump system | - | - | • | - | - |
Accessories | Fraction cell holder | • | • | • | • | • |
Mini flow with ultrasonic unit （0.01- 1000μm) | • | • | • | • | • | |
Paste cell holder | • | • | • | • | • | |
Dry unit （0.1 - 5000μm） | • | • | • | • | • | |
Auto sampler | - | • | • | • | • | |
Slurry sampler | - | • | • | • | • | |