EMIA-Pro Carbon/Sulfur Analyzer

Übersicht

Standard Model: EMIA-Pro
Enables everyone to become a professional analyst

The EMIA-Pro Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.   
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.

Merkmale

Long MTBM (Mean Time Between Maintenance)

The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition 

      

             Before measurement                       After 200 measurements


High Throughput

EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)


Fast & Easy Maintenance

With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.

 

Flat design around the crucible stand     


Advanced Operation software

A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.

* Analysis Navigator 

This function uses the recommended best measurement flow and operating condition based on our experience. Explore more

* Troubleshooting Navigator 

Automatic diagnosis system and troubleshooting navigator. Explore more

* Maintenance Navigator 

Periodic preventive maintenance work navigator by videos and photos. Explore more


Upgradable

The customer can extend the system’s functionality at any time, even after installation, depending upon their needs. Upgrades include:
* Carrier gas purifier for ultra-low concentration carbon measurement
* Auto-sampler (20 positions)
* Halogen trap unit


Hergestellt von HORIBA

Spezifikationen

Contents

EMIA-Pro

Required sample amount

1g ± 0.1g

Typical Meas. time

70 seconds/cycle

Carbon

Meas. Range (m/m)

1.6 ppm - 6.0%

Blank accuracy

σn-1 ≦ 0.8 ppm

Sulfur

Meas. Range (m/m)

2.0 ppm - 1.0%

Blank accuracy

σn-1 ≦ 1.0 ppm

Sample meas. Accuracy

Carbon

σn-1 ≦ 2.0 ppm
or RSD≦1.0%

Sulfur

σn-1 ≦ 2.0 ppm
or RSD≦1.5%

Utility

Carrier gas

Oxygen
(Purity; 99.5%, Pressure; 0.30-0.33MPa)

Operation gas

Nitrogen
(Purity; 99.5%, Pressure; 0.35-0.38MPa)

Power

200/220/240V, 50/60Hz, 5kVA

Dimensions

Main unit*

500(W) x 725(D) x 710(H) mm

Mass

Main unit

approximately 134 kg

Data processing and operation

USB data communication with PC Windows 8.1
Touch panel or Key board and mouse operation

Model name

EMIA-20P: Carbon/Sulfur
EMIA-21P: Carbon
EMIA-22P: Sulfur

Note) "ppm" is equal to mg/kg.

*Except piping parts, projection parts (D:79mm) and flow meter on the back side.

Diagramme

Zubehör

Crucible Pre-heating Unit

The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.

Autosampler

Automation crucible loading and disposing unit.
Up to 20 pcs of crucible are available to be set.


Verbrauchsmaterial

Ceramic crucible

Low carbon blank and high dimension tolerance for high precision analysis.

Accelerators

High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)