OEM Mini CCD Spectrometers

Syncerity BI-NIR Camera

Übersicht

The TE-cooled back illuminated 2048 x 70 CCD Camera combines affordability, performance and versatility for OEM applications. With peak QE of 84% @ 700nm and 20% at 1050nm, Syncerity BI-NIR offers a relatively broad response and addresses multiple applications. In the near-NIR, this detector is a much lower cost alternative to a deep depleted CCD, with no etaloning. Syncerity’s flexible design allows our OEM-dedicated team to quickly adapt the camera for industrial requirements, ranging from alternate CCD chips to electronics customizations.

Merkmale

Back illuminated CCD Technology	Enhanced near infrared sensitivity QE 42% at 1000 nm.
Deep Thermoelectric Cooling	–50°C @ +25°C ambient (–60°C optional)
Ultra-Compact size	Ideal for use on microscopes and OEM integration
Lifetime Vacuum Warranty	All metal sealed technology provides a maintenance-free permanent vacuum
PC Interface	USB 2.0 high speed with 100% data integrity. No controller box
Ruggedized Connectors	Maintains overall system integrity in industrial environments
Scientific Grade CCD with 1 mm Height Spectroscopy Format	Ideally suited for low light level detection in a variety of spectroscopic applications. We offer other CCD formats and sensor types for OEM volumes
Flexible Input & Output Trigger	Interface Experiment synchronization with External Trigger In & TTL Shutter Out with programmable edge triggering
LabView VIs and SDK available	Flexible software to integrate a Syncerity CCD into existing apparatus or as an OEM component. Contact us for a Linux driver.

Hergestellt von HORIBA Scientific

Spezifikationen

SYNCERITY BI-NIR 2048 x 70 — Back Illuminated

CCD Sensor Format	2048 x 70
Quantum Efficiency at 25°C (See QE curve below for NIR Optimized)	60% at 500 nm 80% at 600 nm 80% at 800 nm 68% at 900 nm 42% at 1000 nm 20% at 1075nm
Pixel Size	14μm x 14μm
Image Area	28.7mm x 0.98mm, 100% fill factor
Deep Thermoelectric Cooling	–50°C @ +25°C ambient (–60°C @ +25°C ambient, on request) Yields low dark current suitable for most OEM and some Research applications
Single Pixel Well Capacity	50,000 e^–/pixel (Minimum) 60,000 e^–/pixel (Typical)
Serial Register Full Well Capacity	250,000e^– (Minimum) 500,000 e^–/pixel (Typical) (Typical Output Register Saturation)
Scan Rates	45 kHz and 500kHz
Readout Noise (at 45 kHz and at –50 °C) ^*1	9 e^– (Typical) to 12e^– (Maximum)
Readout Noise (at 500kHz and at –50 °C) ^*1	20 e^– (Typical) to 25 e^– (Maximum)
Maximum Spectral Rate	20 Hz at 45 kHz scan rate 189 Hz at 500kHz scan rate
Digitization	16 bit ADC
Dynamic Range (Typical for Serial Register) ^*2	55,500:1
Non Linearity (Measured on Each Camera)	0.15% (typical) at 45 kHz (0.4% maximum) 0.20% (typical) at 500 kHz (1% maximum)
Dark Current at –50°C ^*3 (Note that pixel size = 14 μm)	0.05 e^–/pixel/sec (Typical)
Software-Adjustable Gains	2, 4 & 9.5 e^–/count @ -50ºC
Environmental Conditions	• Operating Temperature 0°C to 40°C ambient • Relative Humidity < 70% (non-condensing) • Storage Temperature –25°C to 50°C
Weight	1.769 kg (3.90 lb)
Dimensions	Refer to mechanical drawings
Power Requirements AC-DC Power Supply (Provided) Recommendation for OEM Supplying Camera Power Directly:	90–264 VAC, 47–63 Hz • Pin: +9 V, ± 5%, 6.44 A maximum • Regulation: +8.55 Vmin, +9 Vtyp, +9.45 Vmax • Ripple & Noise: 200 mVpp maximum
Minimum Computer Requirements:	• 3.0 GHz single core or 2.4 GHz multi-core processor • 2 GB RAM • 32 bit or 64 bit compatible • 500 MB free hard disk space (additional disk space may be required, depending on data storage needs) • USB 2.0 High Speed Host Controller capable of sustained rate of 40 MB/s • Windows (XP, Vista and 7)

All specifications subject to change without notice.

*Q.E. from CCD manufacturer at 25ºC
1. Entire system noise measured for a single pixel
2. Dynamic range is defined as: Full Well / Readout Noise and is measured at 45 kHz
3. Averaged over CCD area, but excluding any regions of blemishes.

Quantum Efficiency – 40% at 1000nm

Syncerity BI-NIR Features an NIR-Optimized CCD (Q.E measured @ 25ºC)

Diagramme

Brochüren

Syncerity BI NIR (-50C)

Resources

Distance to CCD sensitive area

Connecting to Syncerity

Power Interface:
Connector Type:	PDP-40, Mini PWR DIN, 4-Position, STR Plug
Camera Interface:
Connector Type:	USB standard Type B
Sync I/O Connectors:
Connector Type:	SMB
Input Jack:	TTL IN (EXT TRIG IN)
Output Plug:	TTL OUT (SHUTTER OUT)