
Particle Characterization
LA-920 Bibliography
LA-920
Crystalline Silica Analysis: A Comparison of Calibration Materials and Recent Coal Mine Dust Size Distributions |
Understanding Homogeneity of Powderpolymer Mixtures-Effect of Mixing on Tungsten Powder Injection Molding Feedstock Powder Injection Molding Feedstock |
Low-temperatures intering of BaTiO3 powders prepared by a hydrothermal process with ball-milling system |
Effect of blade rotation on particle classification performance of hydro-cyclones |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |
Classification of silica fine particles using a novel electric hydrocyclone |
Comparative granule characteristics and biokinetics of sucrose-fed and phenol-fed UASB reactors |
Atomic structures and stability of boron nitride nanotubes with a cup-stacked structure |
From monosilane to crystalline silicon, Part I: Decomposition of monosilane at 690-830 K and initial pressures 0.1-6.6 MPa in a free-space reactor |
The effect of size on the acoustic response of polymer-shelled contrast agents |
A new method for the control of dilute suspension sedimentation by horizontal movement |
The effect of a new method of fluid flow control on submicron particle classification in gas-cyclones |
Surface modification of silica particles with polyimide by ultrasonic wave irradiation |
Formulation development of inhalation powders for FK888 using the E-haler® to improve the inhalation performance at a high dose, and its absorption in healthy volunteers |
Preparation of chitosan microparticles by water-in-vegetable oil emulsion coalescence technique |
On the stability of oil-in-water emulsions to freezing |
Bitumen recovery from model systems using a warm slurry extraction process: effects of oilsands components and process water chemistry |
Effects of crystal structure on photolysis of H2O on K-Ta mixed oxide |
Formulation and characterization of bupivacaine lipospheres |
Production of titania nanoparticles by using a new microreactor assembled with same axle dual pipe |
Effect of mist injection position on particle separation performance of cyclone scrubber |
Formulation development of inhalation powders for FK888 with carrier lactose using Spinhaler® and its absorption in healthy volunteers |
Modeling the sorption kinetics of divalent metal ions to hematite |
Synthesis of submicrometer-sized β-SiC particles from the precursors composed of exfoliated graphite and silicone |
Effects of dopants and hydrogen on the electrical conductivity of ZnO |
Effect of mixing on the rheology and particle characteristics of tungsten-based powder injection molding feedstock |
An experimental and numerical study of particle size distribution effects on the sintering of porous ceramics |
Effect of apex cone height on particle classification performance of a cyclone separator |
Membrane process for emulsified waste containing mineral oils and nonionic surfactants (alkylphenolethoxylate) |
Availability of low and high molecular weight substrates to extracellular enzymes in whole and dispersed activated sludges |
Simultaneous separation of common mono- and divalent cations on a calcinated silica gel column by ion chromatography with indirect photometric detection and aromatic monoamines-oxalic acid, containing crown ethers, used as eluent |
Retention behavior of common mono- and divalent cations on calcinated silica gel columns in ion chromatography with conductimetric detection and the use of nitric acid, containing crown ethers, as eluents |
Simultaneous separation of common mono- and divalent cations on an acid-treated silica gel column by ion chromatography with indirect photometric detection and tyramine-oxalic acid, containing 18-crown-6 as eluent |
Effects of protective colloids on the preparation of poly(l-lactide)/poly(butylenesuccinate) microcapsules |
Kinetics of formation of drug particles in the presence of surfactant/polymer |
Reactions of ferrous iron with hematite |
Aqueous dispersion behavior of drug particles by addition of surfactant and polymer |
Origin of the Peñalver Formation in northwestern Cuba and its relation to K/T boundary impact event |
Preparation of stable aqueous dispersion of drug in the presence of polymer as stabilizer |
Synthesis of yttrium aluminum garnet precursor powders by homogeneous precipitation |
Liquid column chromatography |
LA-910 & LA-920
Effect of surface-active stabilizers on the surface properties of coconut milk emulsions |
Improvement of gas-cyclone performance by use of local fluid flow control method |
Structure and electromagnetic characteristics of flaky FeSiAl powders made by melt-quenching |
Effect of dispersing and stabilizing additives on rheological characteristics of the upgraded brown coal water mixture |
Gypsum crystallization and hydrochloric acid regeneration by reaction of calcium chloride solution with sulfuric acid |
Powder metallurgy magnesium composite with magnesium silicide in using rice husk silica particles |
Oxide coatings on Y3Al5O12:Tb3+ particles |
Effect of surface-active stabilizers on the microstructure and stability of coconut milk emulsions |
Effect of type of peroxide on cross-linking of poly(l-lactide) |
Liquid-liquid extraction for efficient synthesis and separation by utilizing micro spaces |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Carbon nanotubes synergistically enhance photocatalytic activity of TiO2 |
All solid battery with phosphate compounds made through sintering process |
Hybridized synergy effect among TiO2, Pt and graphite silica on photocatalytic hydrogen production from water-methanol solution |
Gas transfer kinetics and redox potential considerations in oxidative precipitation of manganese from an industrial zinc sulphate solution with SO2/O2 |
Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology |
Factors governing survival of black willow (Salix nigra) cuttings in a streambank restoration project |
Distribution patterns of octylphenol and nonylphenol in the aquatic system at Mai Po Marshes Nature Reserve, a subtropical estuarine wetland in Hong Kong |
Oligomethylene spacer length dependent interaction of synthetic galactolipids incorporated in phospholipid layers with ricin |
Influence of mass transfer resistance on overall nitrate removal rate in upflow sludge bed reactors |
Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant |
Particle separation performance by use of electrical hydro-cyclone |
Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys |
Macroporous ZrO2 ceramics prepared from colloidally stable nanoparticles building blocks and organic templates |
LiVOPO4 as a new cathode materials for Li-ion rechargeable battery |
Influence of metal oxides on PCDD/Fs formation from pentachlorophenol |
Zeolite-carbon composites prepared from industrial wastes: (I) Effects of processing parameters |
Preparation of CuIn(S,Se)2 by mechanochemical process |
Effect of thermal treatments on the properties of coconut milk emulsions prepared with surface-active stabilizers |
Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery |
Pre-evaluation method for the spectroscopic properties of YAG bulk materials by so-gel synthetic YAG powder |
Continuous fine particle classification by water elutriator with applied electro-potential |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell |
Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO-YSZ slurry |
Nanocrystalline eutectic Al-Si alloy produced by cryomilling |
Effects of addition of food by-products on the fermentation quality of a total mixed ration with whole crop rice and its digestibility, preference, and rumen fermentation in sheep |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and bone powder |
Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO |
Size distributions of manure particles released under simulated rainfall |
Synthesis and characterisation of nano-composite copper oxalate powders by a surfactant-free stripping-precipitation process |
Crystal alignment of graphite as a negative electrode material of the lithium-ion secondary batteries |
Influence of arsenate species on the formation of Fe(III) oxyhydroxides and Fe(II-III) hydroxychloride |
Characteristics of polyimide/barium titanate composite films |
Highly Crosslinked Vs Conventional Polyethylene Particles: Relative In Vivo Inflammatory Response |
Cuttleboneas reinforcing filler for natural rubber |
Radiation-induced grafting of styrene onto ultra-high molecular weight polyethylene powder and subsequent film fabrication for application as polymer electrolyte membranes:I. Influence of grafting conditions |
Container effects on the physicochemical properties of parenteral lipid emulsions |
Effect of pH of fine silica suspension and central rod diameter on the cut size of an electrical hydrocyclone with and without underflow |
Chemical mechanical planarization of copper using transition alumina nanoparticles |
Precursor effects on ZrW2O8 formation kinetics |
Physicochemical stability of phospholipid-dispersed suspensions of crystalline itraconazole |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Impacts of post-glacial lake drainage events and revised chronology of the Champlain Sea episode 13-9 ka |
Influence of carbon content and particle dispersion on radiation properties of coalchars |
Photocatalytic hydrogen production enhanced by laser ablation in water-methanol mixture containing titanium(IV) oxide and graphite silica |
Synthesis of BaTiO3 powders by a ball milling-assisted hydrothermal reaction |
Preparation of ceria with large particle size and high appearance density |
Mutation of the maize sbe1a and ae genes alters morphology and physical behavior of wx-type endosperm starch granules |
The effect of nutrient addition on metal tolerance in Salvinia herzogii |
Physicochemical stability of lipid injectable emulsions: Correlating changes in large globule distributions with phase separation behavior |
Optimization of silica-based media for antibody purification by protein A affinity chromatography |
The incongruent dissolution of scorodite ? Solubility, kinetics and mechanism |
Synthesis and evaluation of Zr0.5Ti0.5B2 solid solution |
Role of phosphate species during the formation and transformation of the Fe(II-III) hydroxycarbonate green rust |
Orbital-and millennial-scale variations in Asian dust transport path to the Japan Sea |
The effect of biomass characteristics on the partitioning and sorption hysteresis of 17α-ethinylestradiol |
Self-propagating high-temperature synthesis of La(Sr)Ga(Mg)O3−δ for electrolyte of solid oxide fuel cells |
The orientation mechanism of (Ca,Sr)Bi4Ti4O15 ceramics prepared by slip casting in high magnetic field and subsequent sintering |
Sulfidation treatment of copper-containing plating sludge towards copper resource recovery |
Analysis of effluent gases during the CCVD growth of multi-wall carbon nanotubes from acetylene |
Single enzyme nanoparticles in nanoporous silica: A hierarchical approach to enzyme stabilization and immobilization |
Effect of aqueous composition on the freeze-thaw stability of emulsions |
Recovery of bitumen from oilsands: gelation of ultra-fine clay in the primary separation vessel |
Thickening properties and emulsification mechanisms of new derivatives of polysaccharides in aqueous solution |
LA-920 & LA-930
Effect of soy protein concentrate in elastomer composites |
Nickel recovered from solution by oxidation using ozone: some physical properties |
A micro structure based numerical simulation of microwave sintering of specialized SOFC materials |
Quantitative approach to physical and chemical gold mobility in equatorial rainforest lateritic environment |
Radio-frequency glow discharge spectrometry: A critical review |
LA-920 & LA-950
Surface modification of silica particles using polyimide |
Influence of cross-linked potato starch treated with POCl3 on DSC, rheological properties and granule size |
Physicochemical assessments of parenteral lipid emulsions: light obscuration versus laser diffraction |
Densification and grain growth in BaTiO3 ceramics fabricated from nanopowders synthesized by ball-milling assisted hydrothermal reaction |
LA-920 & LB-550
The metallicity of thin films and overlayers |
LA-910, LA-920 & LA-930
A multi-proxy study of Argentina loess: Marine oxygen isotope stage 4 and 5 environmental record from pedogenic hematite |
A 1500-year record of temperature and glacial response inferred from varved Iceberg Lake, south central Alaska |
LA-910, LA-920 & LA-950
Microbial activity in a combined UASB - activated sludge reactor system |
Catalytic treating of gas pollutants over cobalt catalyst supported on porous carbons derived from rice husk and carbon nanotube |
Anion effects on electrostatic charging of sterically stabilized, water insoluble drug particles |
Late Quaternary hydroclimatology of a hyper-arid Andean watershed: Climate change, floods, and hydrologic responses to the El Niño-Southern Oscillation in the Atacama Desert |
Influencing effect of intra-granule mass transfer in expanded granular sludge-bed reactors treating an inhibitory substrate |
Deducing source rock lithology from detrital rutile geochemistry: An example from the Erzgebirge, Germany |
Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data |
Millennial-scale changes in terrestrial sediment input and Holocene surface hydrography in the northern South China Sea (IMAGES MD972146) |
Firesides lagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels |