Automatic calibration function pH meter AH-151
Overview
The consumption of calibration solution is 1/5 or less as compared with our existing products*, which contributes to a reduction in running costs.
*When pH electrode is new
The pH meter AH-151 with automatic calibration function performs pH measurement by automatically cleaning the electrode with cleaning solution and performing calibration with standard solution, making it possible to drastically reduce maintenance work. In addition, by spraying the calibration solution, the consumption of calibration solution has been reduced. The spray amount of the cleaning solution can also be adjusted according to the condition of contamination, which contributes to cost reductions. With periodic cleaning and calibration, stable and highly reliable pH measurements are possible.
Features
- Simple Operation with Color Touch Panel LCD
Use of a 5.7 inch touch panel has improved visibility and operability. Electrode characteristics during automatic calibration are automatically graphed, which makes it easy to judge the lifetime of the electrode. - Easy Installation with Delivery in Units
The pH meter can be easily installed, as all components are unitized except for metal fittings and lifting unit. - Reduction in Running Costs
- By spraying calibration solution, the consumption of calibration solution has been reduced.
- The spray amount of cleaning solution for each cleaning can be selected from 50 mL, 75 mL and 100 mL according to the condition of contamination (adjusted to 50 mL as standard).
- Enhanced Self-check Function
The pH meter is equipped with a standard function to self-check symptoms such as abnormal measurement values and sensor degradation, which is useful for taking quick measurements against electrode or equipment abnormalities.
Manufactured by HORIBA Advanced Techno
Specifications
Product name | pH meter with automatic calibration function |
---|---|
Type | AH-151-CH (dip type), -CF (flow-through type), -FK (water sampling type) |
Measuring method | Glass electrode method |
Measuring range | pH: 0 to 14 Resolution: 0.01 pH |
Display unit | Touch panel (TFT color LCD) |
Repeatability | pH: within ±0.02 pH, Temperature: ±0.3°C (Equivalent input) |
Linearity | pH: within ±0.03 pH, Temperature: ±0.3°C (Equivalent input) |
Transmission output | Number of output points: 2, Output form: 4 to 20 mA DC input/output insulation type, Load resistance: Maximum 900 Ω |
Contact output | Number of output points: 9 and 1 (abnormality alarm), Output form: No-voltage contact output, |
Cleaning interval | 0.1 to 168.0 hours, Month, day and time of start of next cleaning can be set, Cleaning time: Approx. 2 minutes (default setting) |
Calibration interval | 1 to 999 hours, Month, day and time of start of next calibration can be set, Calibration time: Approx. 5 minutes (default setting when pH electrode is new) |
Contact input | Number of input points: 3, Contact: No-voltage “a” contact for open collector, Contact function: External commands for cleaning performance (automatic cleaning start, automatic calibration start, stand-by commands) |
Communication capability | RS-485 two-wire system, Input/output insulation type (not insulated from transmission output) |
Combined electrode | Glass electrode 6108 |
Calibration method | Automatic calibration (lift-up type calibration with standard solution spray) or manual calibration |
Cleaning method | Lift-up type cleaning with cleaning solution |
Self-check | Calibration error, Electrode check, System error |
Sample conditions | Pressure: Atmospheric pressure, Temperature: -5 to 80°C, Flow velocity: 2 m/sec or less, Flow rate: 10 L/min or less (only for flow-through type), Conductivity: 10 mS/m (100 μS/cm) or more |
pH standard solution | Two solutions (pH7 and pH4 or pH9), Consumption: Approx. 30 to 40 mL/min (max. 200 mL/calibration), Capacity: PE tank 3 L (calibration approx. 15 to 50 times possible) |
Cleaning chemical | HCI: less than 5 to 10%, Consumption: Approx. 50 mL/cleaning (approx. 75,100 mL/cleaning, adjustable) Capacity: PE tank 20 L (cleaning approx. 300 times possible, using 50 mL each time) |
Water supply | Water quality: Tap water equivalent (industrial water possible), Pressure: 0.2 to 0.75 MPa, Consumption: 10 to 20 L/cleaning, calibration one time (in case of default setting for cleaning time) |
Air supply | Air quality: Instrument air, Pressure: 0.3 to 0.7 MPa, Consumption: 10 to 15 L/min |
Inlet | Supply water: Rc1/2, Air: Rc1/4 |
Cable gland | 8 cable glands for φ7 to φ12 (without cable gland, φ21.5 hole) |
Operating temperature range | 0 to 50°C (no condensation) |
Power supply | Voltage range: 100 to 240V AC ±10%, 50/60 Hz, Power consumption: 100V AC, approx. 20 W during steady state and approx. 35 W during auto-calibration |
Structure | Outdoor setting type: JIS C0920 explosion/splash-proof type (IP54 equivalent), Material of control unit case: SPCC (coated with melamine-based epoxy resin), Metal fittings: SUS304, Stand: SUS304 |
Mass | Operation unit & pole stand: Approx. 60 kg, Metal fittings: Approx. 3 kg, Lifting unit (dip type): Approx. 1.5 kg (except for dip-type holder) |
Note: Although a surge arrester (discharge starting voltage: 400V) is installed for transmission output, contact input and communications, please install an appropriate surge absorber on the connecting line, according to the surrounding environment, equipment installation condition, peripheral equipment, etc.