Life Sciences

Providing sophisticated analytical tools to advance research, product development and quality in the Life Sciences industry

Life sciences or biological sciences mean areas of science that involve the scientific study of life, organisms and biomolecules. This huge field seeks to understand the complex and elaborate mechanisms that support life and helps preserve our lives by increasing the progress of Health (diagnostic analysis and treatment), the control of the environment, the analysis in pharmaceutical research and the quality control in agri-food. At HORIBA Scientific, we provide a wide range of breakthrough instruments and methods tailored to our customers to push the limits of imaginative science.

Browse Applications

Application note - Multimodal Hyperspectral Imaging for Nanotoxicological Applications

An imaging platform that combines Raman microscopy with enhanced darkfield and hyperspectral imaging technology was used to study lung tissue sections containing carbon nanotubes. It enabled easy identification of the regions containing the carbon nanotubes followed by spectroscopic characterization of chemical composition.

Fluorescence Emission spectra of transferrin at increasing concentrations

In this application note, we highlight the high sensitivity of the Duetta for measuring transferrin at very low concentrations. The Duetta spectrofluorometer combines both fluorescence and absorbance measurements simultaneously, thus providing key advantages for protein analysis. In parallel, we compare the fluorescence results obtained using the Duetta with absorbance results obtained with a dedicated low-volume, benchtop spectrophotometer.

Protein A280 application

Duetta is an analytical instrument capable of recording both the fluorescence and the absorbance of a sample. Absorbance data provides concentration-dependant information on non-fluorescent compounds. Through its user-friendly software, Duetta allows different measurements related to biomolecules like DNA, RNA and proteins including protein concentration, DNA/RNA purity, finding the concentration of an unknown sample based on a standard-based calibration curve, Pass/Fail testing and all standard fluorescence and absorbance related measurements. All these functionalities are possible through dedicated applications in EzSpec™ software for Duetta.

Can we accurately and quickly measure the amount of carbon contained in the material?

Identification and characterization of aeroallergens based on morphological and chemical features

The prevalence of allergies in the world is between 30 and 40%. Even though it exists medical treatments such as antihistaminic and desensitization this number is constantly increasing. Thus, in this application note, the identification and chemical characterization of aeroallergens by Raman microscopy will allow to prevent people who are affected by respiratory allergies of the presence of this type of allergens in indoor and outdoor air.

In this study, we demonstrate the ViewSizer 3000’s capabilities as a next generation NTA based analysis instrument in order to accurately and efficiently measure and characterize exosomes via particle size and concentration.

The Detection of a Low Molecular Weight Enzyme Inhibitor using the OpenPlex system

The use of low molecular weight molecules in the industries of drug discovery and agri-food has become increasingly important over the course of a century of drug research and science development in agriculture and in pharmaceutical field.

The majority of proteins are glycosylated: they possess oligosaccharide chains and are hence termed glycoproteins. Oligosaccharides, also called carbohydrate or sugar, are often quite large (as large as some protein domains for example) and they have many functions in molecular interactions.

Description of the advantages of combining the use of peptide chips with direct label-free detection as achieved by SPR imaging (SPRi).

This application note shows that the HORIBA Scientific SPRi platform is suitable for the analysis of aptamer-based molecular interactions. For this purpose, the interaction between human IgE protein, an antibody involved in allergic reactions, and a human IgE specific aptamer4 is presented as proof-of-concept.

Our SPRi technology (Surface Plasmon Resonance imaging), is able to measure multiplexed label-free biolo-gical interactions in a complex media such as serum.We will demonstrate the ability to monitor specific interactions between immobilized peptides and proteins issued from non purified immune sera, using a cystamine/glutaraldehyde SAM surface chemistry on the bio-chip surface. We chose to illustrate this ability by monitoring the interaction between an ovalbumin peptide fragment and an ovalbumin immunized serum.

The purpose of this proof of concept is to show that Surface Plasmon Resonance imaging (SPRi) is a suitable technique to detect allergens. Compared with other techniques, such as ELISA or Luminex, which are based on colorimetric or fluorescence detection, this technology does not require the labeling of antibodies.

HORIBA provides the pharmaceutical industry, biotech companies and academic research laboratories with high performance instrumentation based on SPRi technology (Surface Plasmon Resonance imaging). To demonstrate the power of this technology, we carried out an experiment based on an antibody-antigen interaction. Original surface chemistry combined with an electrochemical process allows the rapid coupling of biomolecules to the gold layer (polypyrrole co-polymerisation) on the top of a glass prism.

Monitoring Cell Culture Media Variability using A-TEEM Spectroscopy

With the rise of protein production using mammalian cell culture, it has become increasingly important to control the quality of the cell culture media for use in production processes. Cell culture media are usually prepared as aqueous solutions and should provide everything a cell line needs for optimal cell growth as well as product yield and quality.

Selection of SpectraLED pulsed excitation sources

To access intrinsic amino acids, such as tryptophan, as probes, the UV excitation wavelengths for pulsed phosphorescence measurements have long been the preserve of low-repetition-rate gas-filled lamps or larger laser systems. Recent developments have enabled the use of interchangeable semiconductor diodes...

Description of the advantages of combining the use of peptide chips with direct label-free detection as achieved by SPR imaging (SPRi).

Rapid mixing accessories to perform stopped flow measurements have found application in characterizing interactions and reactions occurring in solution. Reactants are expelled from syringes, mixed and injected into a flowcell.

The potential health benefits stemming from the antioxidant activity of curcumin, commonly found in turmeric (Curcuma longa L), has attracted the interest of several research groups.

Fluorescence Emission spectra of transferrin at increasing concentrations

In this application note, we highlight the high sensitivity of the Duetta for measuring transferrin at very low concentrations. The Duetta spectrofluorometer combines both fluorescence and absorbance measurements simultaneously, thus providing key advantages for protein analysis. In parallel, we compare the fluorescence results obtained using the Duetta with absorbance results obtained with a dedicated low-volume, benchtop spectrophotometer.

Protein A280 application

Duetta is an analytical instrument capable of recording both the fluorescence and the absorbance of a sample. Absorbance data provides concentration-dependant information on non-fluorescent compounds. Through its user-friendly software, Duetta allows different measurements related to biomolecules like DNA, RNA and proteins including protein concentration, DNA/RNA purity, finding the concentration of an unknown sample based on a standard-based calibration curve, Pass/Fail testing and all standard fluorescence and absorbance related measurements. All these functionalities are possible through dedicated applications in EzSpec™ software for Duetta.

Identification and characterization of aeroallergens based on morphological and chemical features

The prevalence of allergies in the world is between 30 and 40%. Even though it exists medical treatments such as antihistaminic and desensitization this number is constantly increasing. Thus, in this application note, the identification and chemical characterization of aeroallergens by Raman microscopy will allow to prevent people who are affected by respiratory allergies of the presence of this type of allergens in indoor and outdoor air.

The new HORIBA Duetta fluorescence and absorbance spectrometer offers many unique benefits for molecular spectroscopy. It is primarily thought of as a spectrofluorometer that combines absorbance and fluorescence spectroscopy to correct the fluorescence fingerprint for concentration-related effects. Duetta can also be used as a precise absorbance spectrometer. This application note explores the use of Duetta for a common absorbance application, the Protein A280 application.

The Detection of a Low Molecular Weight Enzyme Inhibitor using the OpenPlex system

The use of low molecular weight molecules in the industries of drug discovery and agri-food has become increasingly important over the course of a century of drug research and science development in agriculture and in pharmaceutical field.

The majority of proteins are glycosylated: they possess oligosaccharide chains and are hence termed glycoproteins. Oligosaccharides, also called carbohydrate or sugar, are often quite large (as large as some protein domains for example) and they have many functions in molecular interactions.

Description of the advantages of combining the use of peptide chips with direct label-free detection as achieved by SPR imaging (SPRi).

This application note shows that the HORIBA Scientific SPRi platform is suitable for the analysis of aptamer-based molecular interactions. For this purpose, the interaction between human IgE protein, an antibody involved in allergic reactions, and a human IgE specific aptamer4 is presented as proof-of-concept.

Our SPRi technology (Surface Plasmon Resonance imaging), is able to measure multiplexed label-free biolo-gical interactions in a complex media such as serum.We will demonstrate the ability to monitor specific interactions between immobilized peptides and proteins issued from non purified immune sera, using a cystamine/glutaraldehyde SAM surface chemistry on the bio-chip surface. We chose to illustrate this ability by monitoring the interaction between an ovalbumin peptide fragment and an ovalbumin immunized serum.

The purpose of this proof of concept is to show that Surface Plasmon Resonance imaging (SPRi) is a suitable technique to detect allergens. Compared with other techniques, such as ELISA or Luminex, which are based on colorimetric or fluorescence detection, this technology does not require the labeling of antibodies.

HORIBA provides the pharmaceutical industry, biotech companies and academic research laboratories with high performance instrumentation based on SPRi technology (Surface Plasmon Resonance imaging). To demonstrate the power of this technology, we carried out an experiment based on an antibody-antigen interaction. Original surface chemistry combined with an electrochemical process allows the rapid coupling of biomolecules to the gold layer (polypyrrole co-polymerisation) on the top of a glass prism.

Rapid mixing accessories to perform stopped flow measurements have found application in characterizing interactions and reactions occurring in solution. Reactants are expelled from syringes, mixed and injected into a flowcell.

The use of metal surfaces in conjunction with fluorescence molecules employing a plasmon effect, sometimes referred to as metal enhanced fluorescence, can be advantageous because of the possible enhancement of photophysical properties. For example, the emission intensity of the fluorophore, can be improved.

The potential health benefits stemming from the antioxidant activity of curcumin, commonly found in turmeric (Curcuma longa L), has attracted the interest of several research groups.

Polarized light striking a fluorescent molecule results in polarized fluorescence. This polarized emission gradually returns to unpolarized fluorescence depending on rotational diffusion and other factors. Anisotropy is directly related to the polarization, and is the ratio of the polarized light component to the total light intensity.

Fast and non-invasive methods for clinical and non clinical investigations for biological tissue are more and more required. Raman imaging at micro scale can answer to crucial questions about the monkey brain tissue morphology and structural evolution.

Selection of SpectraLED pulsed excitation sources

To access intrinsic amino acids, such as tryptophan, as probes, the UV excitation wavelengths for pulsed phosphorescence measurements have long been the preserve of low-repetition-rate gas-filled lamps or larger laser systems. Recent developments have enabled the use of interchangeable semiconductor diodes...

Molecular structure of PNA photolyase binding in close proximity to FAD cofactor.

The TRIAX and iHR series spectrometers used in Raman system configurations provide superior imaging performance with no re-diffracted light and maximized optical throughput.

Multichannel scaling (MCS) single-photon-counting spectroscopy performed using HORIBA Jobin Yvon’s FluoroCube fluorescence lifetime system.

Tryptophan phosphorescence within protein molecules is gaining attention as a probe of protein dynamics and structure. The tryptophan phosphorescence lifetime, τ, varies with the protein molecule’s local environment and conformation.

Detecting Conformational Rotamers via TCSPC

Among the possible fluorescence biosensors for medical and biochemical monitoring and imaging are the flavonoids, compounds that occur in many plants and their products, such as tea, chocolate, and red wine.

The brightly-colored coral reefs that make scuba-diving and snorkeling so enjoyable are essential to the survival of much underwater life. Not only do reefs offer a haven for smaller fish to hide from larger predators, but also some fish actually survive by eating the reefs themselves. Reefs offer protection to plants and animals from the ravages of waves and ocean currents. Thus, when the reefs die, so do many other living creatures.

Traditionally, Raman has been a technique of the material scientist, physicist or chemist, but as instrumentation continues to evolve, the power of Raman in biological and medical applications is fast being realized, not least because of the high information content provided and an excellent tolerance for water.

Raman Spectroscopy was evaluated as a non-invasive method of analysis of sperm DNA and the influence of UV irradiation on the sperm. The results show that Raman Spectroscopy, combined with multivariate analysis provide the reproducible and accurate information on DNA of sperm and the effect and location of damage.

Fluorescence of Molecular Beacons

New NIR DSS detectors in final QC at the HORIBA NJ Optical Spectroscopy Center in Piscataway, NJ.

This technical note serves as a guideline to selecting the best solid state detector with the Fluorolog-QM modular research spectrofluorometer for a given series of photoluminescence experiments.

DynaMyc with FLIM (fluorescence lifetime imaging)

The use of fluorescent molecules, known as molecular rotors, is advantageous in estimating the local (nanoscale) viscosity in microheterogeneous systems, since it just requires the measurement of their fluorescence lifetime.

AFM-TERS measurements in a liquid environment with side illumination/collection

Atomic Force Microscopy (AFM) associated to Raman spectroscopy has proven to be a powerful technique for probing chemical properties at the nanoscale. TERS in liquids will bring promising results in in-situ investigation of biological samples, catalysis and electrochemical reactions.

Certain fluorescent molecules, known as molecular rotors, can be employed to estimate the local (nanoscale) viscosity in microheterogeneous systems by measurement of their fluorescence lifetime. This can be advantageous over the usual fluorescence anisotropy method, as the measurement is simpler and faster to perform. This is demonstrated using the HORIBA Scientific TemPro fluorescence lifetime system to monitor the gelation of silica produced using the sol‐gel technique.

In recent years, Spectroscopic Ellipsometry application is extended to the life science. In this article, we introduce two examples from this field: Biocompatibility of DLC films and demineralization and remineralization process of tooth surface.

Research in nanoscience has garnered much interest because of the different properties of small structures compared to the respective bulk material.

A-TEEM™ for Qtracker® 655 quantum dots

Quantum dots (QDs) are semiconducting spheres in the size typically in the range of 1 to 10nm. The size of these small spheres give quantum dots the semiconducting properties and resulting photoluminescence that would not necessarily occur for the same material on larger scales.

InGaAs/GaAs and InAs/GaAs quantum dots (QDs) have been identified as suitable candidates for various applications in the terahertz range by using their intraband carrier transitions.

The NanoLog has a reputation as the premier instrument for the exploration of single-walled carbon nanotubes (SWCNTs).

Silica is currently one of the most important industrial materials, whose nanoparticles are formed via a sol-gel process.

The use of metal surfaces in conjunction with fluorescence molecules employing a plasmon effect, sometimes referred to as metal enhanced fluorescence, can be advantageous because of the possible enhancement of photophysical properties.

HORIBA Jobin Yvon’s spectrofluorometers have many applications in nanophotonics research: single-walled carbon nanotubes (SWNTs), quantum dots (QDs), and organic light-emitting diodes (OLEDs). Quantum confinement affects nanomaterials’ photoluminescence: when the semiconducting nanoparticle is smaller than the bulk material’s Bohrexciton radius, the bandgap energy is inversely proportional to the nanoparticle size.

Photoluminescence Spectroscopy of Quantum Dots

Quantum dots (QDs) have potential applications in optoelectronics, biosensing, biolabeling, memory devices, and sources of laser light.

HORIBA Jobin Yvon’s NanoLog® spectrofluorometer, specially optimized for recording near-IR fluorescence from nanoparticles, includes a double-grating excitation monochromator, imaging emission spectrograph with a selectable-grating turret, and a variety of detectors.

Better Signal-to-Noise Ratios for Carbon Nanotube Spectra

Corrected emission spectra1 of carbon nanoparticles can provide excitation–emission matrices (EEMs) for a range of excitation wavelengths.

Fluorescence Spectra from Carbon Nanotubes

Single-wall carbon nanotubes (SWNTs), consisting of rolled-up single sheets of carbon atoms, have received much attention recently.

In recent years, Spectroscopic Ellipsometry application is extended to the life science. In this article, we introduce two examples from this field: Biocompatibility of DLC films and demineralization and remineralization process of tooth surface.

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.

Vorname

Nachname *

Firma oder Organisation *

Postleitzahl *

Ort

Land *

Bundesland

E-Mail-Adresse *

Telefonnummer

HORIBA Department

Ihre Nachricht *

Ich habe die HORIBA Datenschutzbestimmungen zur Kenntnis genommen.

Browse Products

SZ-100

Nanopartica Series Instruments

OpenPleX

Manual label-free molecular interaction analysis machine Flexible Research Platform

LabRAM Odyssey

mehr LabRAM Odyssey

Best-in-class Raman Imaging & High Resolution Spectrometer

LabRAM HR Evolution

mehr LabRAM HR Evolution

Confocal Raman Microscope

XploRA INV

mehr XploRA INV

Inverted Raman Microscope

XploRA™ PLUS

mehr XploRA™ PLUS

Raman Spectrometer - Confocal Raman Microscope

OCMA-550

Oil Content Analyzer

OCMA-500

Oil Content Analyzer

2.50 mmol/L Calcium Ion Standard Solution Y052H

mehr 2.50 mmol/L Calcium Ion Standard Solution Y052H

Reference Electrode 2060A-10T

mehr Reference Electrode 2060A-10T

Standard type

LAQUA PH1500

mehr LAQUA PH1500

Benchtop Water Quality Meters

Ammonia Electrode Filling Solution

mehr Ammonia Electrode Filling Solution

9425-10C (for general-purpose use)

mehr 9425-10C (for general-purpose use)

Reference Electrode 2565A-10T

mehr Reference Electrode 2565A-10T

Double-junciton type

9300-10D ORP Electrode

mehr 9300-10D ORP Electrode

1.25 mmol/L Calcium Ion Standard Solution Y052L

mehr 1.25 mmol/L Calcium Ion Standard Solution Y052L

Chloride ion electrode (combination) 6560S-10C

mehr Chloride ion electrode (combination) 6560S-10C

100 mg/L Ammonium Ion Standard Solution

mehr 100 mg/L Ammonium Ion Standard Solution

Calcium Electrode Filling Solution

mehr Calcium Electrode Filling Solution

1000 mg/L Ammonium Ion Standard Solution

mehr 1000 mg/L Ammonium Ion Standard Solution

100 mg/L Calcium Ion Standard Solution

mehr 100 mg/L Calcium Ion Standard Solution

5402 DO Electrode Tip

mehr 5402 DO Electrode Tip

Chloride ion electrode tip 7660S

mehr Chloride ion electrode tip 7660S

Chloride Electrode Filling Solution

mehr Chloride Electrode Filling Solution

1000 mg/L Calcium Ion Standard Solution

mehr 1000 mg/L Calcium Ion Standard Solution

100 mg/L Chloride Ion Standard Solution

mehr 100 mg/L Chloride Ion Standard Solution

Fluoride ion electrode (combination) 6561S-10C

mehr Fluoride ion electrode (combination) 6561S-10C

1000 mg/L Chloride Ion Standard Solution

mehr 1000 mg/L Chloride Ion Standard Solution

NIST pH Buffer Solution Kit

mehr NIST pH Buffer Solution Kit

100 mg/L Fluoride Ion Standard Solution

mehr 100 mg/L Fluoride Ion Standard Solution

USA pH Buffer Solution Kit

mehr USA pH Buffer Solution Kit

LAQUAtwin pH-33

mehr LAQUAtwin pH-33

Pocket Water Quality Meters

1000 mg/L Fluoride Ion Standard Solution

mehr 1000 mg/L Fluoride Ion Standard Solution

pH 1.68 Buffer Solution

mehr pH 1.68 Buffer Solution

Fluoride ion electrode tip 7661S

mehr Fluoride ion electrode tip 7661S

Nitrate Electrode Filling Solution

mehr Nitrate Electrode Filling Solution

100 mg/L Nitrate Ion Standard Solution

mehr 100 mg/L Nitrate Ion Standard Solution

LAQUA PH1300

mehr LAQUA PH1300

Benchtop Water Quality Meters

pH 4.01 Buffer Solution

mehr pH 4.01 Buffer Solution

LAQUAtwin pH-22

mehr LAQUAtwin pH-22

Pocket Water Quality Meters

Ammonia electrode (combination) 5002S-10C

mehr Ammonia electrode (combination) 5002S-10C

1000 mg/L Nitrate Ion Standard Solution

mehr 1000 mg/L Nitrate Ion Standard Solution

LAQUA PH1200

mehr LAQUA PH1200

Benchtop Water Quality Meters

9520-10D DO electrode

mehr 9520-10D DO electrode

LabRAM Soleil

mehr LabRAM Soleil

Raman Microscope

Ammonia Ionic Strength Adjustor

mehr Ammonia Ionic Strength Adjustor

Calcium Ionic Strength Adjustor

mehr Calcium Ionic Strength Adjustor

HE-480H

Panel-mount Type Conductivity Meter (Four-Wire Transmission, For Low-concentration)

Potassium Electrode Filling Solution

mehr Potassium Electrode Filling Solution

Chloride Ionic Strength Adjustor

mehr Chloride Ionic Strength Adjustor

LAQUA PH1100

mehr LAQUA PH1100

Benchtop Water Quality Meters

pH 6.86 Buffer Solution

mehr pH 6.86 Buffer Solution

LAQUAtwin pH-11

mehr LAQUAtwin pH-11

Pocket Water Quality Meters

Powder for ORP Standard Solution 160-51

mehr Powder for ORP Standard Solution 160-51

Fluoride Ionic Strength Adjustor

mehr Fluoride Ionic Strength Adjustor

Nitrate Ionic Strength Adjustor

mehr Nitrate Ionic Strength Adjustor

Potassium Ionic Strength Adjustor

mehr Potassium Ionic Strength Adjustor

LAQUA EC1100

mehr LAQUA EC1100

Benchtop Water Quality Meters

pH 7.00 Buffer Solution

mehr pH 7.00 Buffer Solution

7541 DO Electrode Tip

mehr 7541 DO Electrode Tip

3551-10D Conductivity Cell (Submersible Type)

mehr 3551-10D Conductivity Cell (Submersible Type)

Ammonia electrode membrane caps

mehr Ammonia electrode membrane caps

LAQUAtwin Ca-11

mehr LAQUAtwin Ca-11

Pocket Water Quality Meters

LAQUA PC1100

mehr LAQUA PC1100

Benchtop Water Quality Meters

pH 9.18 Buffer Solution

mehr pH 9.18 Buffer Solution

Powder for ORP Standard Solution 160-22

mehr Powder for ORP Standard Solution 160-22

Nitrate ion electrode (combination) 6581S-10C

mehr Nitrate ion electrode (combination) 6581S-10C

LAQUA DS-72

mehr LAQUA DS-72

Benchtop Water Quality Meters

pH 10.01 Buffer Solution

mehr pH 10.01 Buffer Solution

9551-20D DO Electrode

mehr 9551-20D DO Electrode

3552-10D Conductivity Cell (Submersible Type)

mehr 3552-10D Conductivity Cell (Submersible Type)

pH 12.46 Buffer Solution

mehr pH 12.46 Buffer Solution

LAQUA F-74

mehr LAQUA F-74

Benchtop Water Quality Meters

LAQUAtwin NO3-11C/NO3-11S/NO3-11

mehr LAQUAtwin NO3-11C/NO3-11S/NO3-11

Pocket Water Quality Meters

Conductivity Standard Solution Kit

mehr Conductivity Standard Solution Kit

9551-100D DO Electrode

mehr 9551-100D DO Electrode

3553-10D Conductivity Cell (Submersible Type)

mehr 3553-10D Conductivity Cell (Submersible Type)

EzSpec Software

mehr EzSpec Software

Nitrate ion electrode tip 7681S

mehr Nitrate ion electrode tip 7681S

LAQUA F-73

mehr LAQUA F-73

Benchtop Water Quality Meters

ViewSizer 3000

mehr ViewSizer 3000

Multi-Laser Nanoparticle Tracking Analysis (NTA)

Potassium ion electrode (combination) 6582S-10C

mehr Potassium ion electrode (combination) 6582S-10C

LAQUAtwin K-11

mehr LAQUAtwin K-11

Pocket Water Quality Meters

5401 DO Electrode Tip

mehr 5401 DO Electrode Tip

9382-10D Conductivity Cell (Submersible Type)

mehr 9382-10D Conductivity Cell (Submersible Type)

LAQUA F-72

mehr LAQUA F-72

Benchtop Water Quality Meters

Electrode protector cap (3 pcs/pack)

mehr Electrode protector cap (3 pcs/pack)

LAQUAtwin Na-11

mehr LAQUAtwin Na-11

Pocket Water Quality Meters

3561-10D Conductivity Cell (Flow Type)

mehr 3561-10D Conductivity Cell (Flow Type)

Potassium ion electrode tip 7682S

mehr Potassium ion electrode tip 7682S

Calcium ion electrode (combination) 6583S-10C

mehr Calcium ion electrode (combination) 6583S-10C

LAQUAtwin Salt-22

mehr LAQUAtwin Salt-22

Pocket Water Quality Meters

3562-10D Conductivity Cell (Flow Type)

mehr 3562-10D Conductivity Cell (Flow Type)

Printer (for GLP/GMP compliance)

mehr Printer (for GLP/GMP compliance)

84 uS/cm Conductivity Standard Solution

mehr 84 uS/cm Conductivity Standard Solution

3573-10C Conductivity Cell (Flow Type)

mehr 3573-10C Conductivity Cell (Flow Type)

Calcium ion electrode tip 7683S

mehr Calcium ion electrode tip 7683S

LAQUAtwin EC-33

mehr LAQUAtwin EC-33

Pocket Water Quality Meters

3574-10C Conductivity Cell (Flow Type)

mehr 3574-10C Conductivity Cell (Flow Type)

Cyanide ion electrode 8001-10C

mehr Cyanide ion electrode 8001-10C

1413 uS/cm Conductivity Standard Solution

mehr 1413 uS/cm Conductivity Standard Solution

12.88 mS/cm Conductivity Standard Solution

mehr 12.88 mS/cm Conductivity Standard Solution

Digital simulator X-51

mehr Digital simulator X-51

111.8 mS/cm Conductivity Standard Solution

mehr 111.8 mS/cm Conductivity Standard Solution

Digital simulator X-52

mehr Digital simulator X-52

HE-200H

Field-installation Type Electric Conductivity Meter (Four-Wire Transmission, For High-concentration)

Powder for pH Standard Solution 150-4

mehr Powder for pH Standard Solution 150-4

USB cable

Chloride ion electrode 8002-10C

mehr Chloride ion electrode 8002-10C

Sulfide ion electrode 8003-10C

mehr Sulfide ion electrode 8003-10C

AC adapter cable set

mehr AC adapter cable set

Iodide ion electrode 8004-10C

mehr Iodide ion electrode 8004-10C

LCD protection sheet

mehr LCD protection sheet

Bromide ion electrode 8005-10C

mehr Bromide ion electrode 8005-10C

LAQUA WQ-330-K

mehr LAQUA WQ-330-K

Handheld Water Quality Meters

Protection cover

mehr Protection cover

Copper ion electrode 8006-10C

mehr Copper ion electrode 8006-10C

9480-10C Long ToupH electrode (for large containers and long test tubes)

mehr 9480-10C Long ToupH electrode (for large containers and long test tubes)

Electrode hook for D-70 Series, ES-71, and OM-71

mehr Electrode hook for D-70 Series, ES-71, and OM-71

Cadmium ion electrode 8007-10C

mehr Cadmium ion electrode 8007-10C

9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

mehr 9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

9418-10C Micro ToupH electrode (for low-volume samples)

mehr 9418-10C Micro ToupH electrode (for low-volume samples)

Lead ion electrode 8008-10C

mehr Lead ion electrode 8008-10C

9415-10C Standard ToupH electrode (for general laboratory application)

mehr 9415-10C Standard ToupH electrode (for general laboratory application)

FA-70A Integrated Electrode Stand

mehr FA-70A Integrated Electrode Stand

Thiocyanate ion electrode 8009-10C

mehr Thiocyanate ion electrode 8009-10C

FA-70S Electrode stand (adjustable type)

mehr FA-70S Electrode stand (adjustable type)

9615S-10D Standard ToupH electrode (for general laboratory application)

mehr 9615S-10D Standard ToupH electrode (for general laboratory application)

Silver ion electrode 8011-10C

mehr Silver ion electrode 8011-10C

DP-50S Electrode stand

mehr DP-50S Electrode stand

9618S-10D Micro ToupH electrode (for low-volume samples)

mehr 9618S-10D Micro ToupH electrode (for low-volume samples)

DP-70S Electrode Stand

mehr DP-70S Electrode Stand

9680S-10D Long ToupH electrode (for large containers and long tubes)

mehr 9680S-10D Long ToupH electrode (for large containers and long tubes)

Nitrate ion electrode 8201-10C

mehr Nitrate ion electrode 8201-10C

9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

mehr 9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

Potassium ion electrode 8202-10C

mehr Potassium ion electrode 8202-10C

Calcium ion electrode 8203-10C

mehr Calcium ion electrode 8203-10C

EMIA-Step

Carbon/Sulfur Analyzer

9625-10D (for general-purpose use)

mehr 9625-10D (for general-purpose use)

LAQUA WQ-320-K

mehr LAQUA WQ-320-K

Handheld Water Quality Meters

9630-10D (for low conductivity samples)

mehr 9630-10D (for low conductivity samples)

LAQUA WQ-310-K

mehr LAQUA WQ-310-K

Handheld Water Quality Meters

EMIA-Expert

mehr EMIA-Expert

Carbon/Sulfur Analyzer

LAQUA PD220

mehr LAQUA PD220

Handheld Water Quality Meters

EMIA-Pro

Carbon/Sulfur Analyzer

9631-10D (for hydrofluoric acid or HF samples)

mehr 9631-10D (for hydrofluoric acid or HF samples)

LAQUA PD210

mehr LAQUA PD210

Handheld Water Quality Meters

LAQUA PC220

mehr LAQUA PC220

Handheld Water Quality Meters

9632-10D (for strong alkali samples)

mehr 9632-10D (for strong alkali samples)

LAQUA PC210

mehr LAQUA PC210

Handheld Water Quality Meters

XGT-7200

X-ray Analytical Microscope

LAQUA EC220

mehr LAQUA EC220

Handheld Water Quality Meters

LAQUA 21 CFR Part 11 Software

mehr LAQUA 21 CFR Part 11 Software

6367-10D (for high accuracy pH measurement)

mehr 6367-10D (for high accuracy pH measurement)

LAQUA EC210

mehr LAQUA EC210

Handheld Water Quality Meters

LAQUA DO220

mehr LAQUA DO220

Handheld Water Quality Meters

LAQUA DO210

mehr LAQUA DO210

Handheld Water Quality Meters

LAQUA PH220

mehr LAQUA PH220

Handheld Water Quality Meters

6252-10D (for food samples)

mehr 6252-10D (for food samples)

LAQUA PH210

mehr LAQUA PH210

Handheld Water Quality Meters

9651-10D (for field testing)

mehr 9651-10D (for field testing)

Duetta

Fluorescence and Absorbance Spectrometer

Glass Electrode 1066A-10C

mehr Glass Electrode 1066A-10C

Standard type

Glass Electrode 1076A-10C

mehr Glass Electrode 1076A-10C

For measurement of low-conductivity water and non-aqueous solvents.

6069-10C (for very slender test tubes)

mehr 6069-10C (for very slender test tubes)

6261-10C (for flat surface measurement)

mehr 6261-10C (for flat surface measurement)

SPRi-Arrayer

mehr SPRi-Arrayer

Direct contact spotting

Aqualog - Water Treatment Plant Analyzer

mehr Aqualog - Water Treatment Plant Analyzer

Automated Organic Analysis & Early Warning Sentinel

HT-110

Total Organic Carbon Monitor

XGT-9000

X-ray Analytical Microscope