
Portable Gas Analyzer
The PG-300 is a compact and lightweight stack gas analyzer that can simultaneously measure up to five separate gas components. Its capability of providing precise measurement has been proven for field measurements and also for laboratory applications. The PG-300 series also offers the capability to measure methane (CH4). A 20% weight reduction over previous PG models and integration of shock-resistant side guards make the PG-300 a robust analyzer for use in the field. An optional electronic cooler unit is available for long-term measurements for severe monitoring applications as gas turbines, boilers, and incinerators PG-300 series versatility makes the analyzers suitable for investigating environmental problems, evaluating catalyst performance, and for controlling process gas streams.
The documentary of University of California, Irvine, Combustion Lab. (3:16)
The PG-350 software allows your PG to be connected on any network. The software runs in the Windows environment (Vista, XP, 7 and above) and provides a simple interface to acquire data and record CSV files.
Additionally you can control the NO and NOX line selection valve to switch automatically during your acquisition.
All component values are shown as well as a large graphic display.
You can select your mode in the solenoid menu:
- Manual NOX
- Manual NO
- Auto NO/NOX
The graph time range can be selected from 3 to 480 min.
You can install the software and license file on unlimited computers.
Contact your local sales office to get a license file (based on PG MAC address)
To use multiple PG-300 units, use multiple installations of the software in different folders.
Run simultaneously two or more instances of PG software from the different folders, connect and record data from as many PG-300's as are connected on the network.
NOx | SO2 | CO | CO2 | O2 | CH4 | ||
---|---|---|---|---|---|---|---|
Standard | PG-320 |
| ● | ● | |||
PG-325 | ● | ● | |||||
PG-330 | ● | ● | ● | ||||
PG-335 | ● | ● | ● | ||||
PG-337 | ● | ● | ● | ||||
PG-340 | ● | ● | ● | ● | |||
PG-350 | ● | ● | ● | ● | ● | ||
CH4 | PG-324 | ● | ● | ||||
PG-344 | ● | ● | ● | ● |
Analysis Principle | |
---|---|
NOx | Cross-Flow Modulation Chemiluminescence Detection Method |
SO2 ,CO, CH4 | Cross-Flow Modulation Non-Dispersive Infrared Absorption Method |
CO2 | Non-Dispersive Infrared Absorption Method |
O2 | Galvanic, Zirconia or Paramagnetic Method |
Ranges (Standard models) | |
---|---|
NOx | 0-25/50/100/250/500/1000/2500 ppm |
SO2 | 0-200/500/1000/3000 ppm |
CO | 0-200/500/1000/2000/5000 ppm |
CO2 | 0-10/20/30 vol% |
O2 | 0-5/10/25 vol% * |
Ranges (CH4 models) | ||
---|---|---|
CH4 | 0-2000/5000ppm | |
CO | 0-2000/5000ppm | |
CO2 | 0-5/10/20vol% | |
O2 | 0-5/10/25vol%* |
Standard Model | CH4 Model | |
---|---|---|
Repeatability | ±0.5% of full scale (NOx:≧100ppm range / CO: ≧1000ppm range) ±1.0% of full scale (Except above) | ±1.0% of full scale |
Linearity | ±2.0% of full scale | |
Drift | ±1.0% of full scale / day (For SO2 analyzer only: ±2.0% of full scale / day) | |
Response Time (Td+T90) | Analyzers except SO2 analyzer: 45 sec. or less (From sample inlet) SO2 analyzer: 180 sec. or less (From sample inlet) | |
Sample Gas Flow Rate | Approx. 0.5L/min. | |
Display | Measurement (3 or 4 digit display), range flow rate, etc. | |
Output | DC 4-20 mA (non-insulated) or 0-1 V (non-insulated)[optional] / Ethernet | |
Warm-up Time | 30 min. ±2.0% of full scale / 2 hours | |
Data Saving | SDTM memory card / SDHCTM memory card | |
Ambient Temperature | 0°C-40°C <32°F-104°F> | |
Ambient Humidity | Maximum 80% R.H. | |
Power | AC 100V to 240V ±10% (maximum 250 V), 50/60 Hz | |
Power Consumption | Approx. 160VA in a steady state, maximum 220VA | |
Dimentions | (With side guards) 300(W) x 520(D) x 260(H) mm <11.8"(W) x 20.5"(D) x 10.2"(H)> (Without side guards) 260(W) x 520(D) x 260(H) mm <10.2"(W) x 20.5"(D) x 10.2"(H) | |
Weight | Approx. 13kg - 15kg <29lb ~ 33lb> | |
Environmental rating | IP42(Optionally available) | |
Sample Gas Condition | Temperature: Ambient temperature |
・SD is a trade mark for SD-3C, LLC.
・TAKE GREAT CARE WHEN HANDLING SAMPLE GASES CONTAINING TOXIC OR FLAMMABLE GASES. TAKE MEASURES SUCH AS PROVIDING ADEQUATE VENTILATION, INSTALLING GAS DETECTORS, AND REMOVING IGNITION SOURCES IN THE WORKING AREA.
・THE PG-300 SERIES IS NOT EXPLOSION-PROOF. DO NOT USE THIS PRODUCT IN A HAZARDOUS LOCATION OR FOR MEASUREMENT OF SAMPLE GASES IN EXPLOSIVE ATMOSPHERES (MIXTURE OF A COMBUSTIBLE GAS AND AIR WITHIN THE FLAMMABILITY LIMITS). HORIBA, LTD. AND ITS AFFILIATES ARE NOT LIABLE FOR EMERGENCIES CAUSED BY LEAKAGE OR MISHANDLING OF SUCH GASES.
Sie haben Fragen oder Wünsche? Nutzen Sie dieses Formular, um mit unseren Spezialisten in Kontakt zu treten. * Diese Felder sind Pflichtfelder.
Stack Gas Analysis System
Stack Gas Analyzer
Multi-Component Gas Analyzer
Analysatoren zur Überwachung der Umgebungsluft
Ambient Ammonium Monitor
Ambient Hydrogen Sulfide Monitor
Stack Gas Analysis System
FTIR Exhaust Gas Analyzer Dilute Measurement Type
FTIR Exhaust Gas Analyzer Direct Measurement Type
Stack Gas Analyzer
Heated Type NOx Analyzer
Heated Type THC Analyzer
Motor Exhaust Gas Sulfur Analyzer
Motor Exhaust Gas Analyzer
FTIR Motor Exhaust Gas Analyzer
Laser Spectroscopic Motor Exhaust Gas Analyzer
On-board Emissions Measurement System
On-board Emissions Measurement System for NH3/N2O
Multi-Component Gas Analyzer
Analysatoren zur Überwachung der Umgebungsluft
Ambient Ammonium Monitor
Oxygen/Nitrogen/Hydrogen Analyzers
Carbon/Sulfur Analyzer
Stack Gas Analysis System
Stack Gas Analyzer
Heated Type NOx Analyzer
Motor Exhaust Gas Analyzer
On-board Emissions Measurement System
On-board Emissions Measurement System for NH3/N2O
Multi-Component Gas Analyzer