Back to Particle Characterization Products Overview
Back to Particle Applications

Polymers & Plastics

Polymer Applications

Polymers are large molecules made from repeating structural units connected by covalent chemical bonds. We often use the word ‘plastic’ to refer to polymeric materials, but polymers also include a wide range of natural materials such as proteins, DNA, cellulose, shellac and amber.

Polyvinyl Chloride

One example of a commonly synthesized polymer is polyvinyl chloride (PVC), which is used for plumbed piping, building materials, vinyl siding, and many other products with ‘vinyl’ in the name. PVC is made by polymerization of the vinyl chloride monomer as shown below.

PVC is available in many size ranges, including large flakes. The data shown below was generated on the CAMSIZER dynamic image analysis system.

Polystyrene Latex: A common particle size standard

One polymer that many particle size analysts should be familiar with is polystyrene, the material often used for particle size standards. These standards are available in sizes ranging from 20 nanometers to 1,000 microns. The particle size distribution for these samples is extremely narrow, therefore classifying them as monodisperse standards. Although most polystyrene samples are suspensions, powder materials are also available – see the example result below for a dry sample measured on the LA-960 laser diffraction analyzer.

5 Micron Microspheres (photo courtesy of Duke Scientific)

Polystyrene Latex Powder Result from the LA-960 with PowderJet Dry Feeder

Expanded Polystyrene

Expanded polystyrene (EPS) can be found in many areas of our daily lives due to unique properties such as low thermal conductivity.  Uses for this material range from practical applications (thermal insulation and noise dampening in building construction, and the manufacture of packaging for foodstuffs) to fun, niche markets (surfboard construction).  The particle size range of EPS spheres covers 0.1 to approximately 3 millimeters.

The CAMSIZER is replacing the older, traditional technique of sieve analysis for EPS due to faster analysis speed and the valuable particle shape information provided by Dynamic Image Analysis. The result below shows excellent correlation between the CAMSIZER and historic sieve results for a sample of EPS.

Results by sieve (black stars) and CAMSIZER (red line)

Related Notes

Particle Size Analysis of Polymers
DescriptionAs the needs of the chemical industry change and products require more detailed inspection to maximize quality and quantity, the analytical instrumentation available must adapt to fill the space. Both the LA-960 and CAMSIZER successfully meet the needs for research and routine quality control. Laser diffraction analyzers measure from nanometer to millimeter sized wet or dry dispersed polymers. Dynamic image analysis systems are preferred when product size grows and shape factors become important.
Size 0.52 MB
FiletypePDF
Production Control of Polystyrene Beads using Digital Image Analysis
DescriptionFor free-flowing materials like polymer beads, the CAMSIZER represents a superior alternative to traditional particle size analyzers. The measurement system is greatly suitable for use in production, as it guarantees rapid measurements, simple operation and robustness to vibration and dust.
Size 0.38 MB
FiletypePDF

Browse Products

Partica LA-960
MorePartica LA-960
Laser Scattering Particle Size Distribution Analyzer
CAMSIZER P4*
MoreCAMSIZER P4*
Dynamic Image Analysis System Particle Size
CAMSIZER X2*
MoreCAMSIZER X2*
Dynamic Image Analysis System Particle Size
Partica mini LA-350
MorePartica mini LA-350
Laser Scattering Particle Size Distribution Analyzer
PSA300
MorePSA300
Static Image Analysis System Particle Size
SA-9600 Series
MoreSA-9600 Series
BET Flowing Gas Surface Area Analyzers
SZ-100
MoreSZ-100
Nanopartica Series Instruments
ViewSizer 3000
MoreViewSizer 3000
The Better Way to Characterize Nanoparticles

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.