2.44
MB
Water Treatment: Industrial Water Quality Measuring Instruments H-1 Series
HO-480
Industrial ORP meter
The HO-480 industrial ORP meter is an ORP converter for measuring the oxidation-reduction potential of all types of solvent.
Being combined with a lead-free sensor, it makes measurements in a way that is kind to the environment.
Segment: Process And Environmental
Division: Process Water
Manufacturing Company: HORIBA Advanced Techno Co., Ltd.
- Includes a sensitivity correction function
It is possible to compensate for changes in the sensitivity of the ORP electrodes. - A line-up of lead-free ORP electrodes
Not only the glass body, but almost all sections of the ORP electrodes, including lead wires and soldered junctions are lead free. - Uses lead-free solder
To reduce the burden on the environment, lead-free solder has been used to mount the components on the printed circuit board.
| Product name | Industrial ORP meter |
|---|---|
| Model | HO-480 |
| Measuring range | ±2000 mV: resolution of 1 mV |
| Transmission output | 4 mA to 20 mA DC, input / output isolated type Maximum load resistance 900 Ω Transmission output range: freely selectable within the measurement range |
| Repeatability | Within ±5 mV of the full scale (by equivalent input) |
| Linearity | Within ±5 mV of the full scale (by equivalent input) |
| Contact output | Outputs: 2 points Alarm contact output (R1 and R2) Contact type: relay contact, SPDT (1c) Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load) Contact function: selectable from upper / lower limit operation (ON / OFF control), alarm, and maintenance. |
| Calibration function | Sensitivity compensation Adjust: ±200 mV Span variable range: 50.0 % to 150.0 % |
| Transmission output hold function | ·Previous value hold ·Optional value hold ·Continuous Selectable from the above (However, only the previous value hold is available in the maintenance mode.) |
| Self-diagnosis function | ·Outside of the measuring range ·Converter error |
| Power supply | Rated voltage 100 V AC to 240 V AC, 50/60 Hz, 10 VA (max) |
| Structure | Indoor-use panel installation type Panel: IP65 dust and water proof structure |
| Protective structure | Panel: IP65 (IEC60529, JIS C0920) |
| Conforming standards | CE Marking FCC Rule |
| External dimensions | 48 (W) mm x 96 (H) mm x 115 (D) mm Case depth: approx. 105 mm |
| Mass | Approx. 400 g |
![[Exclusively for TWIN] Conductivity Cell 0413](http://static.horiba.com/fileadmin/Horiba/Products/Scientific/Water_Quality/02_Products/By_Category/04_Electrodes/Pocket_Meters/HR1918.png)
