IG-320

Gloss Checker

Gloss is a surface's attribute of directly reflecting light and the degree of this reflected light is termed glossiness. The IG-320 measurement angle is set at the 60° standard angle allowing discerning even the lowest levels of gloss and provides a definite numerical value for glossiness. The IG-320 provides accurately and instantaneously measurement from low gloss matte surfaces to the highly polished texture for such operations management areas as floor maintenance, polishing, and coating. Up to 99 measurements can be taken with a simple key operation and averaged using another key. Up to 99 averages can be stored for later use. Easy data management promises smooth inspection work. Because the IG-320 does not require the use of special measuring technology, it can easily be used by anyone.

Segment: Process And Environment

Division: Gloss Checker

High precision Measurement range
Internal memory
Average mode
Measuring angle 60°

Optical System	Incident angle 60⁰ Reception angle 60⁰
Measurement area	12x6mm oval
Light Source	LED (wavelength:880 nm)
Detector	SPD (Silicone Photodiode)
Measuring range	0-100.0
Display range	0mm-199.9mm (resolution:0.1)
Reproducibility	±5%F.S. ±within 1 digit
Power Source	S-006P dry batter (9VDC) for operation. CR-2025 lithium battery (3VDC) for memory
Continual-use time	15 hours or more
Ambient Conditions	0-40⁰ C
Dimensions	78(w) * 189(H) 58(D)mm 3.1(w) 7.4(H) * 2.3(D)in
Mass	Approx. 400g(with battery)
Additional Functions	Automatic Calibration Automatic power cut-off Display hold Overrange display Battery alarm Built-in data memory (max.99) Computation of averages Keystroke confirming tone