Pocket Water Quality Meters
HORIBA's unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop.
The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
|Measurement Principle||2 Electrode Bipolar AC|
|Minimum Sample Volume||0.12ml|
|Salinity Range & Resolution|
0.0 to 100.0 g/L (ppt): 0.1 g/L
0.00 to 10.00%: 0.01%
|Calibration Points||Up to 2|
|Calibration Curves||NaCl & Seawater|
±2% full scale (0.0 to 9.9 g/L)
± 4% full scale (10.0 to 100.0 g/L)
|Temperature Display||0 to 50.0 ºC|
|Temperature Calibration||5 to 40.0 ºC|
|Display||Custom (monochrome) digital LCD with backlight|
|Operating Temperature||5 to 40.0 ºC|
|Operating Humidity||85% or less relative humidity (no condensation)|
|Power||CR2032 batteries (2)|
|Battery Life||Approx. 400 hours in continuous use without backlight|
|Material||ABS epoxy body & titanium coated with platinum black sensor|
|Dimensions||164 x 29 x 20 mm (excluding projections)|
|Mass||Approx. 50 g (including sensor and batteries)|
Note: g/L is equivalent to parts per thousand (ppt)
Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.