The OCMA-500 Oil Content Analyzer has been redesigned for even better operability, maintaining its user-friendly features. After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The OCMA-500 cuts solvent consumption by 20% compared with our previous products, reducing environmental impact. It also reduces the running costs.
How to measure:
Fully automated one-touch operation, from oil extraction to sample measurement and draining
Reduced environmental impact and running costs
(20% cut in solvent consumption)
With no need for a solvent evaporation process, the OCMA-500 offers easy operation, and can detect even oils with low boiling points.
Improvement of operability:
Backlit extraction tank (patent applied for)
The extraction tank is equipped with LEDs. Illuminating the tank makes it easy to check the phase separation between sample and solvent.
Before extraction After extraction
*The color depends on the sample.
The OCMA-500 comes equipped with a 3.5-in color graphic LCD. Menus and measurement data can be clearly seen
Storing data on USB flash memories enables easy data management on PCs.
Inputting measurement conditions can change the units displayed (mg/L, mg/kg, mg/g, and mg/PC) as the user needs.
For monitoring final discharge water
For monitorng discharge from ships
For monitoring water quality in sorrounding areas
Water quality survay based on environmental standard.
For monitoring final discharge from petroleum refinery plant.
For oil dispersion reserch at time of an accident.
|Measurement principle:||Solvent extraction, NDIR|
analysis (Infrared spectroscopy)
|Measurement range:||0mg/l ~ 200mg/l dynamic ranging|
|Resolution||0 to 99.9 mg/L; 0.1 mg/L|
100 to 200 mg/L; 1 mg/L
|Repeatability||0 to 9.9 mg/L; ± 0.2 mg/L ± 1 digit|
10.0 to 99.9 mg/L; ± 2 mg/L ± 1 digit
100 to 200 mg/L; ± 4 mg/L ± 1 digit
*For standard liquids
|Display Method||3.5 inches, 320×240 dots|
Backlight Colour graphic LCD
|Calibration Method||Zero, Span Calibration|
|Extraction Solvent||S-316 solvent|
|Amount of test sample required||Sample water : Solvent = 2 : 1|
|Amount of extraction solvent required||8 mL|
|Extraction Method||Built-in extractor|
|Ambient Operationg Temperature||0 to 40 ℃ (non condensation)|
|Power supply||AC 100V to 240V ±10%, 50/60 Hz|
|Power consumption||AC 100V:Approx.60VA|
AC 240V: Approx.90VA
|External Dimensions||200(W)×313(D)×342(H) mm|
|Mass||Approx. 7 kg|
|External Output||Output to an USB memory stick|
300-item data memory
Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.