Stack Gas Analyzer GI-700 series

Increase your CEMS Capabilities with a HORIBA Multi-gas Analyzer

Experience HORIBA, the Global Single Source Solutions Provider with over 50 years of technological advancements and unparalleled reliability, dependability and operability.The GI-700 stack gas analyzer is designed to continuously measure the concentrations of nitrogen oxides (NOx), sulfur dioxide (SO2), carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2), and ammonia (NH3) in stack flue gas streams.

 

Segment: Process And Environment
Division: Combustion
Base product
Manufacturing Company: HORIBA Ltd.
  • Ultimate Dependability
    Proven cross-flow modulation technique
    Continuous base line validation
     
  • Ultimate Low cost ownership
    Up to 6 gases can be measured using a single analyzer with multiple detectors. Works with a simple sampling unit having less tubing, fewer power cables. Simplified wiring translates into less time required for installation. Minimum function for the operation. Any additional functions can be added from controlling PLC.
     
  • Ultimate Sensitivity
    5 ppm High-Precision measurement (NOx, SO2 and CO) is available.
     
  • Others
    - An external converter provides for separate measurements of NO and NO2.
    - All component modules can be easily installed with in a single 19 inch case. The compact design saves space, facilitates maintenance and requires less wiring and tubing during installation.
    - Power consumption is reduced by approximately 50% as compared to systems using individual analyzers (NH3 analyzer).
     
  • User Friendly


     
  • Various Applications include:
    Stack emission monitoring, SCR control, Desulfurization control, Greenhouse gas monitoring, Boiler emissions measurements, Gas separation, Coal and gas fired emission sources,  incinerator emissions monitoring...

Model

GI-700

Component

NOx

SO2

CO

CO2

O2

NH3*3

Measurement methods*1

NDIR
CLA

NDIR
NDUV

NDIR

NDIR

MPA

CLA

Range*1

Standard

10~5000 ppm

10~5000 ppm

50~5000 ppm

5~25 vol%

10~25 vol%

 10-100
ppm

 

Optional

5 ppm~

5 ppm~

5 ppm~

10 vol%~

-

 -

Range Ratio*1

Standard1:101:101:101:51:51:10
 

Optional

1:201:201:20*21:5--

Indicated error
(Linearity)

± 1.0 % of full-scale value for each component and range (Standard range ratio)
± 2.0 % of full-scale value for each component and range (Optinonal range ratio)

Zero drift

± 1.0%/week of full scale (standard range) (if the ambient temperature change is ≤ 5°C)
± 2.0%/week of full scale (optional range and O2 carrier specification O2 analyzer) (if the ambient temperature change is ≤ 5°C)

Span drift

± 2.0%/week of full scale (if the ambient temperature change is ≤ 5°C)

Response time

T90=45s from the analyzer inlet

Interference

±2.0% of full scale

Environment
Condition

Temperature

0° to 40°C (No direct sun light or no radiation heat)

Humidity

≤ 90%

Vibration

100Hz, 0.3m/s2 or less

Dust

Less than environment standard

Measuring Gas Condition

Temperature

Ambient temperature

Dust

None

Standard gas composition

NO :Up to 5000 ppm
NO2: None
SO2: Up to 5000 ppm
SO3: None
CO :Up to 5000 ppm,
CO2:3 vol% to 15 vol%
O2  :0.2 vol% to 15 vol%
HCl : None
H2O: Saturated at 5°C

Sample inlet tube

Polytetrafluoroethylene tube (6 mm O.D./4 mm I.D.)

Sample gas pressure

Atmospheric pressure ± 4 in. W.C.

Pressure control

Not including (Vacuum regulator (-9.8 kPa))

Output(Option)

Analog output: 6 channels 4-20mA, 0-1V, 0-5V
Digital input: 8 channels 24V/10mA
Digital output: 16channels 24V/0.5A

Calibration gas

Zero gas : Nitrogen
Span gas : Gas to be measured

Carrier gas for (Oxygen analyzerNitrogen (for N2 carrier specification), Air (for air carrier specification)
Air for ozone generationDry air (saturated at ≤ -30°C)

Power supply

100 - 240 VAC (Depends on components)

Power frequency

50/ 60 Hz for common use

Power consumption

240 VA

Exterior dimensions/Mass

5U below in (H)19 in. (W)22 in. (D) / Approx. 19kg (depends on the incorporated components)

Materials in contract with sample gas

PTFE, Nylon, PP, FKM, SS304, SS316
Serial CommunicationsModbusTM, Ethernet (Modbus address will be disclosed)
*Modbus is a trademark of Schneider Electric Inc.

*1: Depends on measurement range specifications.
*2: A range ratio of 1: 40 is also possible for special applications.
*3: A range ratio of CLA NH3 and CLA NOx should be 1: 5 or less.

GI-700 Brochure English
CategoryDocuments
Size 2.01 MB
FiletypePDF

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.