VS20-VIS

Miniature High Throughput Spectrometer

HORIBA designs and manufactures miniature high-throughput OEM spectrometers from 190 nm to 1700 nm for various applications. Thanks to a low stray light aberrations corrected concave holographic grating, the VS20-SYS platform offers in a 1.68 x 1.87 x 2 inches footprint a very reliable and robust spectrometer.

VS20 OEM spectrometers can be fully customized in sensors, entrance, slit size, electronics board, interface, etc.

For OEM Industrial Applications

Fluorescence
Transmission and Reflectance
Examples:
- Semiconductor Process Inspection
- LED Testing
- Color Measurement
- Environmental monitoring
- Food & Beverage Safety

*Available in select countries.

You can email OEM Technical Sales at: OEM.US@horiba.com or contact OEM at: +1.732.494.8660 Ext. 7733

Segment: Scientific

Division: Mini-Spectrometers and Scientific Cameras for OEMs

Very compact and robust
Cost effective OEM solution
Mass production capability
Various wavelength ranges UV/VIS/VNIR/NIR
Low stray light
Customizable to customers'requirement

Quantum Efficiencies

OEM Spectrometer Selection Guide

View and Download our OEM Spectrometer Selection Guide

You can email OEM Technical Sales at: OEM.US@horiba.com or contact OEM at: +1.732.494.8660 Ext. 7733

General Spectrometer Specifications
Spectral Coverage	390 – 770 nm extending to UV or NIR range is possible upon request
Spectrometer Resolution	<4 nm with 50 μm slit width (Narrower slits available)
Spectral Dispersion	56.51 nm/mm (in average); 0.44 nm/pixel
Focal Length	20 mm
Options	Selection of different high grade sensors : CMOS-APS, CMOS-PPS* (PDA), optional CCD on request Input port: SMA, other options available upon request
F/#	~ F/2.7
Wavelength Accuracy	<0.4 nm (using multi-area wavelength calibration)
Stray Light	< 0.15%
Software	LabVIEW™ acquisition software for initial evaluation (DLLs provided for software integration)

Detector Options and Specifications
Detector Type	Hamamatsu CMOS-APS linear image sensor S13014N with active pixel structure and global e-shutter	Other detector options such as CMOS-PPSs with passive pixel structure and full well up to several 100,000,000 e– and back illuminated CCDs available upon request. See some options in the table below.
Detector Sensor Format	512 x 1 pixels
Detector Pixel Size	14 μm x 200 μm
Detector QE	refer to graphs below
Full Well Capacity	100,000 e¯ (typical) 80,000 e¯ (minimum
Readout Noise	16 e¯ (typical) to 20 e¯ (maximum)
Maximum Spectral Rate	44 spectra/s
ADC	16-bit
Dynamic Range (FW/RN)	7053:1
Non-linearity	<1% (corrected)
Dark Current	375 e¯/pixel/s (typical) 500 e¯/pixel/s (maximum)
Communication	USB 2
Environmental Conditions	Operating temperature 0°C to 40°C ambient Relative humidity <70% (non-condensing) Storage temperature -25° C to 45° C
Power Requirements AC/DC Power Supply (provided)	90-264 VAC, 47–63 Hz

Some CMOS-PDA Options (other sensors available upon request)
Sensor type	S10113-256N	S8378-256N	S9226N-03	S9227N-03
Pixel format	25μm (W) x 500μm (H) x 256 pixels	25μm (W) x 500μm (H) x 256 pixels	7.8μm (W) x 125μm (H) x 1024 pixels	12.5μm (W) x 250μm (H) x 512 pixels
Detector QE	refer to graphs below
Linear Full Well (e-)	~94M e- (typical)	~43M e- (typical)	~1.9M e- (typical)	~3M e- (typical)
Readout Noise (e-)	5200 e¯ (typical)	3370 e¯ (typical)	390 e- (typical)	290 e- (typical)
Spectrometer housing will be slightly different depending on CMOS-PDA options

*Specifications, form factor, and spectrometer cover subject to change without notice. No LabVIEW™ license is needed to run our acquisition software.
*APS stands for active pixel sensor CMOS (buried PD, high sensitivity similar to CCD)
**PPS stands for passive pixel sensor CMOS (surface PD, large full well capacity - replaces NMOS-PDAs)