HORIBA
  • Products
    • By Segment
      • Automotive
      • Medical
      • Process and Environmental
      • Semiconductor
      • Scientific
    • All Products (A-Z)
    • By Industry
      • Arts, Entertainment and Recreation
        • Art Conservation
        • Museums, Historical Sites and Similar Institutions
      • Education, R&D and Government Institutions
        • Universities
        • Research and Testing Laboratories
      • Energy and Environment
        • Battery
        • Coal and Consumable Fuels
        • Electric Utilities
        • Energy Fuel Oil
        • Environmental Countermeasures
        • Oil and Gas
        • Petroleum and Coal Products Manufacturing
      • Food and Beverage
        • Beverages
        • Food
        • Cosmetics
      • Health Care
        • Biotechnology
        • HORIBA In Vitro Diagnostic solutions for human health care
        • Life Sciences
        • Pharmaceuticals and Medicine Manufacturing
      • Industrials
        • Building Products
        • Commercial and Professional Services
        • Electrical Equipment
        • Machinery
      • Information Technology
        • Semiconductor Manufacturing Process
      • Materials
        • Chemicals
        • Chemical Manufacturing
        • Containers and Packaging
        • Nonferrous Metals
        • Nonmetallic Minerals
        • Paper, Forest Products and Manufacturing
        • Plastics and Rubber
        • Primary Metals
      • Mobility and Transportation
        • Automobiles and Components
        • Automotive Manufacturing
        • Other Transportation Equipment Manufacturing
      • Waste Management
        • Solid Waste Management and Remediation Services
        • Water Waste Management and Remediation Services
      • Water
        • Desalination
        • Drinking Water Utilities
        • High Purity Water
        • Other Industry Water
        • Water Reuse
    • By Technique
      • Atomic Spectroscopy
        • Energy Dispersive X-ray Fluorescence (ED-XRF)
        • Glow Discharge Optical Emission Spectrometry (GD-OES)
        • Inductively Coupled Plasma - Optical Emission Spectroscopy (ICP-OES)
        • Inorganic Elemental Analysis
        • Beta-ray Absorption Analyzer
      • Electrochemistry
        • Potentiometry based on Ion-Selective Electrode (ISE)
      • Life Science Techniques
        • Label-free Detection / Surface Plasmon Resonance Imaging (SPRi)
      • Mass Spectrometry
        • Plasma Profiling Time-Of-Flight Mass Spectrometry (PP-TOFMS)
        • Quadrupole Mass Spectrometry
      • Material Characterization
        • Colorimetry
        • Condensation Particle Counter (CPC)
        • Dynamic Light Scattering (DLS) Particle Size Distribution Analysis
        • Magneto-pneumatic Analysis
        • Mechanical Flowmetry
        • Pressure-based Mass Flowmetry
        • Spectroscopic Ellipsometry
        • Static Light Scattering (SLS) / Laser Diffraction Particle Size Distribution Analysis
        • Fluid Measurement and Control
      • Molecular Spectroscopy
        • Absorption and Transmission Spectroscopy (UV, Visible, NIR)
        • Cathodoluminescence (CL, CLUE)
        • Chemiluminescence
        • Fluorescence Spectroscopy
        • Fourier-Transform Infrared Spectroscopy (FTIR)
        • Non-Dispersive Infrared Spectroscopy (NDIR)
        • Non-Dispersive Ultra Violet Spectroscopy (NDUV)
        • Photoluminescence (PL) & Electroluminescence (EL)
        • Quantum Cascade Laser (QCL) Spectroscopy
        • Raman Imaging and Spectroscopy
        • Vacuum Ultra Violet Spectroscopy
      • Radioactivity
        • Crystal Scintillation
      • Surface Science Techniques
        • Plasma Profiling Time-Of-Flight Mass Spectrometry (PP-TOFMS)
        • AFM-Raman (co-localized measurements & TERS)
  • Applications
    • Arts, Entertainment and Recreation
      • Art Conservation
      • Museums, Historical Sites and Similar Institutions
    • Education, R&D and Government Institutions
      • Universities
      • Research and Testing Laboratories
    • Energy and Environment
      • Coal and Consumable Fuels
      • Electric Utilities
      • Energy Fuel Oil
        • Wear metals and additive Elements Analysis.
      • Environmental Countermeasures
      • Petroleum and Coal Products Manufacturing
        • Petrochemicals
      • Photovoltaics
      • Oil and Gas
      • RoHS and ELV
    • Food and Beverage
      • Agriculture & Crop Science
      • Research & Development
      • Beverages
      • Food
      • Food & Beverage Manufacturing
    • Health Care
      • Biochemistry
      • Biotechnology
        • High Throughput Screening of Affimer Proteins using SPRi Label-Free Technology
        • Analytical Chemistry
      • Human Health Care
      • Life Sciences
        • Cell Biology
        • Blood Testing
        • Proteomics
        • Microbiology
        • Structural Biology
        • Genomics
        • Bioengineering
        • Nanoscience
        • Personal Care
      • Pharmaceuticals and Medicine Manufacturing
        • Cosmetics
        • Drug Discovery and Development
        • Drug Delivery
        • Counterfeit
        • Quality Assurance
        • Vacuum Monitoring in Dryer Equipment for Freeze Dry in Pharmaceuticals and Medicine Manufacturing
        • Bioprocessing
        • Analytical Chemistry
    • Industrials
      • Battery
      • Commercial and Professional Services
        • Gas mass flow control and measurement for reference value of PM2.5 measurement
      • Construction & Engineering
      • Electrical Equipment
      • Machinery
    • Information Technology
      • Semiconductors
        • 2D Materials
        • Graphene
        • Photovoltaics
        • Determination of Perovskite Optical Constants
        • Display Technologies
        • Data Storage
        • Nanomaterials
      • Semiconductor Manufacturing Process
      • Technology Hardware and Equipment
    • Materials
      • Ceramics
      • Chemicals
        • Fertilizers, phyo-sanitary
        • Polymers & Plastics
        • Analytical Chemistry
      • Chemical Manufacturing
      • Construction Materials
      • Containers and Packaging
        • Quality control in the aluminium packaging industry
      • Metal Powder
      • Nonferrous Metals
      • Nonmetallic Minerals
        • Glass
        • Coatings
      • Paper, Forest Products and Manufacturing
      • Plastics and Rubber
      • Primary Metals
      • Material Research
        • Corrosion
        • 2D Materials
        • Quantum Dots
        • Carbon based Materials - Graphene
        • Nanomaterials
      • Photovoltaics
      • Forensics
      • Metal and Mining
        • Gemstones
    • Mobility and Transportation
      • Automotive Manufacturing
      • Engine, Turbine and Power Transmission Equipment Manufacturing
      • Real Driving Emissions
      • RDE Plus
    • Waste Management
      • Solid Waste Management and Remediation Services
      • Water Waste Management and Remediation Services
        • Repeatability of Traces and Major Elements in Water
        • Very Rapid Analysis of Supply Water, Sludge From Purification Station and Animal Food
        • Waste Water and Soil Analysis
        • Waste Water Treatment and Disposal
    • Water
      • Drinking Water Utilities
      • Water Reuse
        • Water Testing
      • General Water Measurement
  • Technology
    • Measurement and Control Techniques
      • Electrochemistry
        • The Story of pH
        • The Basis of pH
        • Measurement of pH
        • The Story of Ion
        • The Basis of Ion
        • Measurement of Ion
        • The Story of ORP
        • The Basis of ORP
        • Measurement of ORP
        • The Story of Conductivity
        • The Basis of Conductivity
        • Measurement of Conductivity
        • The Story of Salt
        • The Story of Dissolved Oxygen
        • The Basis of DO Measurement
        • LAQUA Electrode Technology
      • Elemental Analysis
        • X-ray Fluorescence Spectroscopy (XRF)
        • Glow Discharge Optical Emission Spectroscopy
        • Inductively Coupled Plasma - Optical Emission Spectroscopy (ICP-OES)
        • Carbon/Sulfur & Oxygen/Nitrogen/Hydrogen Analysis
      • Health Care
        • Multi Distribution Sampling System (MDSS)
        • Reticulocytes Analysis
        • CBC + CRP
        • Slide Production
        • Automatic Rerun
        • Absorbance
        • Fluorescence
        • Flow cytometry
        • Impedance / Resistivity
        • Sedimentation
        • Spectrophotometry
        • Potentiometry
        • INR screening
        • Clotting
        • Turbidimetric
        • Chromogenic
      • Light Scattering
        • Dynamic Light Scattering (DLS) Particle Size Distribution Analysis
        • Molecular Weight
        • Raman Scattering
        • Static Light Scattering (SLS) / Laser Diffraction Particle Size Distribution Analysis
        • Zeta Potential
      • Fluid Control
        • Thermal Mass Flowmetry
      • Mass Spectrometry
        • Quadrupole Mass Spectrometry
      • Microscopy and Imaging
        • AFM-Raman
        • Atomic Force Microscopy [AFM]
        • Cathodoluminescence
        • Image Analysis of Particles
        • Micro-X-ray Fluorescence
      • Physisorption
        • Surface Area
      • Spectroscopy
        • Cathodoluminescence Spectroscopy
        • AFM-Raman
        • Detectors
        • 50 years of Diffraction Gratings
        • Diffraction Gratings Ruled and Holographic
        • Fluorescence Spectroscopy
        • Raman Spectroscopy
        • Spectrometers, Monochromators and Spectrographs
        • Spectroscopic Ellipsometry
        • Vacuum Ultra Violet Spectroscopy
        • X-ray Fluorescence
      • Surface Plasmon Resonance
        • Surface Plasmon Resonance Imaging (SPRi)
  • Service
    • Analysis Services
      • Analysis Centers and Services
      • EMC Analysis Service
    • Calibration and Certification
      • Calibration Centers
    • Customer Support
      • HORIBA Medical Documentation Database
      • Medical Customer Support
      • On-Site Support
      • Software Upgrades
      • STARS Helpdesk
    • Maintenance
      • Dynamometer and Other Overhaul Services
      • Periodic Maintenance
    • Spare Parts and Consumables
    • Testing and Consulting
      • Testing Centers
    • Training
      • Product Training
        • Scientific Product Training
        • Automotive Product Training
        • Medical Product Training
      • Technology Training
        • Raman Training
        • Glow Discharge Training
        • Fluorescence Training
        • Ellipsometry Training
        • SPRi Training
        • Inductively Coupled Plasma Training
        • Inductively Coupled Plasma Training (USA)
        • PSA Training
        • Carbon, Sulfur, Oxygen, Nitrogen and Hydrogen Analyzers Training (USA)
        • Online-OnSite Training
  • Company
    • About HORIBA
      • Message
      • Company Profile
        • Board of Directors
        • Corporate Officers
      • Culture
        • Corporate Philosophy
      • History
        • 1945–1960s
        • 1970s
        • 1980s
        • 1990s
        • 2000s
        • 2010s
      • Technical Journal "Readout"
        • Masao Horiba Awards Research Articles
        • Readout No. E54 - Microplastics and Nanoplastics: Analysis and Method Development
        • Readout No. E53 - 2019 Masao Horiba Awards - Advanced Analytical and Measurement Technologies for Efficient Control System to Maximize the Performance of Electric Power and Batteries Usage
        • Readout No. E52 - Green Innovation for Marine Shipping Industry
        • Readout No. E51 - 2018 Masao Horiba Awards Advanced analytical and measurement technologies in semiconductor manufacturing processes
        • Readout No. E50 - Low-Carbon Society and Environmental Improvement
        • Readout No. E49 - Photonic Instrumentation in Life Science
        • Readout No. E48 - Water Measurement Experts
        • Readout No. E47 - Application for Semiconductor Manufacturing Process
        • Readout No. E46 - New Development for Automotive Test Systems
        • Readout No. E45 - Application Technology in Analysis
        • Readout No. E44 - Contribution of Diagnostics to Total Medical Care/Healthcare
        • Readout No. E43 - Watching the Environmental and Society with Measurements
        • Readout No. E42 - More Efficient Testing on Automotive Development, Improving the Accuracy of Fuel Consumption Measurement
        • Readout No. E41 - Application
        • Readout No. E40 - Application
        • Readout No. E18 - EUROPE
        • Readout No. E17 - AMERICA
        • Readout No. E16 - Chinese (Asia)
        • Readout No. E15 - Technologies for HORIBA STEC
        • Readout No. E14 - Masao HORIBA Awards"Measurement of Bioparticles" and "Measurement of Internal Combustion"
        • Readout No. E13 - Technologies for Automotive Testing
        • Readout No. E12 - Masao Horiba Awards "X-ray Analysis Technology"
        • Readout No. E11 - The Second Masao Horiba Awards
        • Readout No. E10 - Environmental Analysis Technologies for the Management of Global Environment and the Development of Industry
        • Readout No. E09 - The First Dr.Masao Horiba's Award and the 50th Anniversary Products
        • Readout No. E08 - Products and Technologies of HORIBA ABX
        • Readout No. E07 - Products and Technologies of Jobin Yvon HORIBA Group
        • Readout No. E06 - 50th Anniversary of HORIBA, Ltd. Products and Technology of HORIBA Group
        • Readout No. E05 - Semiconductor Instruments
        • Readout No. E04 - Hematology Instruments
        • Readout No. E03 - Paticulate Matter
        • Readout No. E02 - The Technolgy Alliance for X-ray Analysis
        • Readout No. E01 - the Analysis of the Global Environment
      • Virtual Patent Marking
    • Events
    • Career
    • Investor Relations
      • Home
      • Investor Relations News
      • Management Policies
        • Message from the CEO
        • Mid-Long Term Management Plan
        • Corporate Governance
        • Corporate Culture "Joy and Fun"
        • Corporate Philosophy
      • IR Library
        • Financial Statements
        • Presentation Materials
        • HORIBA Report
        • Financial Information
      • Stock Information
        • Basic Stock Information
      • Investor Relations Contact
      • Other IR Information
        • Investor Relations Calendar
        • Disclaimer
    • News
    • Social Responsibility
      • Home
      • Message
      • HORIBA's CSR
        • CSR Policy, CSR Promotion System
        • UN Global Compact
        • HORIBA and the SDGs
      • Environment
        • Policy
        • Environmental Activities
        • Eco-Friendly Products
        • Actions for RoHS Directive, REACH Regulation and GHS Regulations
      • Social
        • Home
        • Integrated Management System
        • Quality
        • Occupational safety and health
        • Promotion of Diversity
        • Material Procurement
        • Social Activities
      • Governance
        • Corporate Governance
        • Code of Ethics
        • Internal Controls
        • Compliance Promotion Systems
        • Risk Management
      • HORIBA Special Contents
      • Library
      • HORIBA Group Social Media
        • Social Media Registered Accounts
        • HORIBA Group Social Media Policy
        • HORIBA Group Terms of Use for Social Media
      • Integrated Report
    • Group Companies
      • Americas
        • Brazil
        • Canada
        • United States
      • Asia
        • China
        • India
        • Indonesia
        • Japan
        • Korea
        • Philippines
        • Singapore
        • Taiwan
        • Thailand
        • Vietnam
      • Europe
        • Austria
        • Belgium
        • Czech Republic
        • France
        • Germany
        • Italy
        • Netherlands
        • Poland
        • Portugal
        • Romania
        • Russia
        • Spain
        • Sweden
        • Turkey
        • United Kingdom
  • Contact
    • Contact Form
    • Worldwide Locations
Glow Discharge Optical Emission Spectroscopy (GD-OES) open open
  • Basic Concepts
  • Sample Measurement with GDOES
  • Sample Test and Analysis
  • Comparison with Other Techniques: Surface Analysis
  • Comparison with Other Techniques: Bulk Analysis
  • Instrument Introduction
  • Benefits and Features of Pulsed RF GDOES
  • Join the GD Community
  • Bibliography
  • HORIBA
    • Products
    • Applications
    • Technology
    • Service
    • Company
    • Contact
    Technology
    • Measurement and Control Techniques
    Measurement and Control Techniques
    • Basic Concepts
    • Sample Measurement with GDOES
    • Sample Test and Analysis
    • Comparison with Other Techniques: Surface Analysis
    • Comparison with Other Techniques: Bulk Analysis
    • Instrument Introduction
    • Benefits and Features of Pulsed RF GDOES
    • Join the GD Community
    • Bibliography
    Instrument Introduction

Instrument Introduction

The diagram below is a schematic of the instrument.

Schematic of the Pulsed RF GDOES instrument.

Fig 62: Schematic of the instrument.

Services are what you'd expect: electricity, ultra-high purity argon, water cooling, high purity nitrogen (for the spectrometer) and compressed air (for pneumatic valves).

What is Pulsed RF GDOES?

 GD Profiler 2.

Fig 63: GD Profiler 2.

Pulsed RF GDOES is the result of cross collaboration of HORIBA Scientific with the plasma coating research community. This is the most advanced analytical GD technique available now.

There was absolutely no reason to limit the use of analytical GD instruments to the steel industry. Systems are now used both in material science labs at universities and in industries where they contribute to the development of new materials with coatings at the nano-scale upward or help to monitor photovoltaic devices manufacturing, i.e., to understand the origin of corrosion on painted car bodies, to assess the composition of precious metals, to control hard disks or LED manufacturing, etc.

GD Profiler HR.

Fig 64: GD Profiler HR.

With “Pulsed RF GDOES,” thin and thick layers of conductive or isolating materials are readily analyzed. The HORIBA Pulsed RF GDOES instruments are named GD Profiler 2 and GD Profiler HR.

What is the principle of GDOES?

GD Prinicple.

Fig 65: GD Prinicple.

In a glow discharge, a low pressure gas is flushed in the chamber. When the RF power is switched, an electrical plasma is set up. The sample is sputtered by ions of Ar layer by layer, and neutral species enter in the plasma. These atoms removed from the material and entering the plasma are excited through collisions with electrons or metastable carrier gas atoms. The characteristic spectrum emitted by these excited atoms is measured by the spectrometer.

The process is a dynamic one: new species constantly enter the plasma as the sputtering continues, therefore the spectrum constantly changes as new layers are sputtered.

Which gases are used for Pulsed RF GDOES?

Ar is the most common gas employed in GD. It is not costly and the low flow required for GD operation (about 0.2 l/min during analysis) will make a 200 bars cylinder bottle last for months. As no UHV is used in GD, the technique entirely relies on the cleanliness of the source and, to a great extent, on the Ar purity.

Ar can excite nearly all elements except F. To measure F (or monitor Ar in the sample) Ne has to be used.

What is the function of the GD source?

The Glow Discharge source is responsible of the creation of the plasma. The plasma is located inside the anode. The plasma assures the sputtering of the sample and the excitation of the sputtered species. It is crucial to get flat craters for depth profile.

It is also important to generate the maximum light for sensitivity. With Pulsed RF, a stable plasma can be obtained on thin/thick films, conductive or non-conductive, with minimal thermal effects.

What are the GD Plasmas?

Plasma is the fourth state of matter. Plasma is an ionized gas electrically neutral (containing same number of negative and positive species – respectively electrons and positive ions in a positive plasma).

Plasmas can be characterized by their ionization efficiency σ = n/(n+N) where n is the number of charged particles (n~ne~np) and N is the number of neutral particles.

Glow Discharge Plasmas are weakly ionized (σ <10-4). They are generated at room temperature by applying an electric field to a low pressure gas  nd are called “cold plasmas”. The electric field accelerates the electrons to sufficient energies to ionize, through collisions, the gas molecules.

A GD plasma requires a low pressure gas atmosphere and the application of an electric field between two electrodes.

The glow is not spatially uniform.

Glow Discharge plasmas are very interesting, simultaneously being a source of light, a source of charged particles and a source of active species.

What are the physical principles of the GD plasma?

The physical principles of the GD plasma.

Fig 66: GD plasma.

In its most simple configuration, a “GD plasma” consists of two parallel plane electrodes immersed in a cell with a low pressure gas and electrically connected to a generator. As the voltage increases over a threshold value, the cell begins to “glow”; a plasma is created and a current flows through the electrodes. Ions form a layer of positive charge close to the cathode where the applied potential is mainly redistributed; the “sheath”. In  he steady state, the plasma is sustained by the secondary electron emission process.

GD voltage/current curve.

Fig 67: GD voltage/current curve.

The typical GD curve V/I is as follows. The exact values depend on the cathode material, the type of gas, the gas pressure, etc. The EF region – named abnormal Glow Discharge – corresponds to a functioning point where the entire cathode surface facing the plasma is covered by the plasma and where an increase of V corresponds to an increase in A. This will be the functioning region for our analytical GD.

Is the plasma in our GD instruments similar to the plasmas used for coatings?

GD source.

Fig 68: GD source.

At first look there is little in common between the GD source where the plasma is confined in a small tube, typically 4 mm in diameter, and the large plasma chambers used for material deposition.

But the physical principles of the two plasmas are the same with only a scaling factor. This has helped us benefit from the tremendous knowledge acquired over the years in plasma deposition to bring GD to a new standard: the Pulsed RF GDOES instrument.

In addition, these large plasma chambers are often equipped with our spectrometers to observe the plasma changes during the process. Customers who prepare new coatings with such low pressure plasmas (HPIMS, magnetron sputtering, PVD, etc. – acronyms will differ depending on the actual technology applied) often use our Pulsed RF GDOES instruments to characterize their coatings, reinforcing their complementarity.

How does the GD source work?

Photo and schematic diagram of the analytical GD source.

Fig 69: Photo and schematic diagram of the analytical GD source.

The analytical GD source features a geometry which has not changed much since Grimm's original concept. Schematics of a typical design and a photo are shown below. The anode (grounded) is normally a circular tube of 4 mm in diameter. Facing the anode, and maintained at proper distance of the anode by a spacer (here the white coloured ceramic), the sample is the powered electrode. The sample seals the GD source by simple application onto an o-ring.

A primary vacuum is assured within the anode and in the interstitial space between sample and ceramic. A continuous flow of gas (often Ar) is applied and regulated at the typical low pressure of GD plasmas: a dynamic process is therefore present.

Cross section view of the analytical GD source mounted on a stainless steel body with gas, vacuum and light path connections.

Fig 70: Cross section view of the analytical GD source mounted on a stainless steel body with gas, vacuum and light path connections.

This geometrical configuration restricts the plasma in the anodic tube.

Ions are accelerated towards the cathode and have enough energy to sputter the cathode/sample material. Sputtered species enter the plasma and are excited by collisions. De-excitation of excited species creates light, i.e., photon characteristics of the sample material. As sample material is continuously sputtered, the measured light reflects the temporal evolution of the sputtered species.

The special geometrical configuration of the analytical source – notably the double differential pumping with 2 pumps accounts for many of the specificities and crucial properties of the instrument.

What is the anode in GDOES?

In GDOES, the 'anode' is the mainly positive electrode. The copper tube is the anode. It is electrically grounded.

Fig 71: Anode.

The "anode" is the mainly positive electrode. The copper tube is the anode. It is electrically grounded.

What is the cathode in GDOES?

In GDOES, the sample is the cathode (“mainly” negative electrode in most part of the RF cycles). It is connected to the generator. This is why the sample chamber is closed during analysis.

How can large and small size samples be measured by GDOES?

Large and small size samples can be measured by GDOES.

Fig 72: 2 mm and 4 mm craters.

The standard diameter is 4 mm corresponding to optimum compromise between crater shape and quantity of light collected. 2 mm anodes are also available.

2 mm is the practical minimum size, because below that size, the quantity of collected light is very small. However, 1 mm anodes do exist and have been used in some experiments.

1 mm spots done on a ceramic (the ruler below confirms the spot size).

Fig 73: 1 mm spots done on a ceramic (the ruler below confirms the spot size)

Anodes are usually round, as this is easier to manufacture. Other shapes (for anodes and ceramics) have been made for special applications.

Fig 74: Various crater shapes.

Of course larger anodes are available and used in some applications where more light collection is needed. 7 mm is standard but 6 mm, 8 mm and 10 mm have also been designed for some customers.

The application on precious metals shown at the GD day with outstanding detection limits was done with a 8 mm anode.

The 10 mm anode was, for instance, used to measure He with Ne gas – a poster showing the result is available – He is difficult to excite, so collecting more light was useful.

Anodes are usually round, as this is easier to manufacture; there is no other reason for this design. Other shapes (for anodes and ceramics) have been made for special applications, as shown here.

What is the Anode-to-Sample Gap?

Anode-to-sample gap.

Fig 75: Anode-to-sample gap.

The Anode-to-Sample Gap is the distance between the front surface of the anode and the front surface of white ceramic.

Why is it important to keep the distance anode/sample constant?

Typical GD crater shape.

Fig 76: Typical GD crater shape.

The anode-to-sample gap is a crucial parameter for reproducible GDOES data. Increasing the anode-to-sample gap increases the source impedance. This change in source impendance then affects the relationship between current and voltage in the plasma. An anode-to-sample gap between 0.1 mm and 0.2 mm is generally recommended. Small gaps are usually beneficial for improving depth resolution; larger gaps allow running the discharge for longer times without creating a short circuit between the anode and sample.

The geometry of the GD source assures that only the sample will be sputtered away. This is only true if the tip of the anode ends into the dark space. The distance between anode and sample is therefore crucial, in the range of 150 μm and should be carefully monitored. As this distance increases, the crater shape will be affected and the electric parameters of the discharge will also change.

The double pumping assures that deep craters even down to 150-200 μm can be obtained by evacuating away the sputtered particles. However, as the photo above illustrates, a certain re-deposition of material on the edges of the crater usually occur. When the crater is too deep, the re-deposition peak will be so close to the anode that discharge will stop.

Why measure non-conductive samples with Pulsed RF source?

Pulsing the source.

Pulsed operation is a way to minimize the sample heat while keeping the instantaneous power high (and having more light). The pulsed RF mode has been studied extensively by HORIBA Scientific, in cooperation with plasma researchers.

A proprietary patent allows us to automatically match even in pulsed mode.

Schematic pulse sequence, example 50% duty cycle.

Fig 77: Schematic pulse sequence, example 50% duty cycle. From "Review Pulsed glow discharges for analytical applications, Spectrochimica Acta JAAS Part B"

Pulsed RF is the most advanced source available for analytical GD. DC and RF power supplies have previously been used for powering the analytical GD plasmas.

Historically DC sources came first, as materials under investigation were conductive metals exclusively, and they remain much cheaper to build. RF sources have a much wider range of applications as they can be used for metals, non-metals and hybrid configurations. They are recognized to also be superior for ultra thin layers notably. RF sources permit Plasma Cleaning on the samples prior to analysis.

RF sources finally offer the advantage to be able to use within the same calibration, metals and non-metals which is beneficial even when conductive layers are to be measured, as it offers a way to find samples to calibrate “difficult” elements or ranges. (As an example, a carbide can be used as high point for C, an alumina layer used for calibrating O, a glass sample for Ca or Na, various polymers for H, etc.)

The RF source operates at 13.56 MHz which is the frequency used for plasma deposition systems. Over the course of an RF cycle, the voltage becomes alternatively positive and negative, preventing the accumulation of charges. The two electrodes become alternatively anode and cathode over a cycle (each 74 ns!).

But in our analytical GD, the two electrodes are not plan and parallel.

One electrode (as seen from the plasma) is actually the zone of the sample facing the anode (and not the entire sample), where the other one (as seen from the plasma) is the inner wall of the anode. The two electrodes are therefore asymmetric. The current (current density × surface area) having to be identical on both electrodes, the current density is higher on the small electrode (the sample) and therefore the electric field is higher (meaning that only the sample is being sputtered).

The potential automatically moves to negative values; a “DC bias voltage” builds itself at the sample surface and enables operation of the source on non-conductors as well as conductors.

Pulsed RF is the most advanced source available for analytical GD. DC and RF power supplies have previously been used for powering the analytical GD plasmas.

Schematic diagram of the GD source and voltage over a rf cycle in the cases of symmetric and non-symmetric electrodes.

Fig 78: Schematic diagram of the GD source and voltage over a rf cycle in the cases of symmetric and non-symmetric electrodes.

RF plasmas provide softer sputtering than DC ones, but they are more energetic due to the additional energy supplied by the oscillation mechanism of the RF power.

Depending on the source, various parameters can be controlled or monitored – real power, voltage, pressure, current, pulsing frequency, duty cycle, etc. They have a direct effect in particular on the sputtering rate and on the crater shape that can vary from concave to flat to convex.

  • Products
    • By Products (A-Z)
    • Automotive
    • Medical
    • Process and Environment
    • Scientific
    • Semiconductor
  • Applications
    • Drinking Water Utilities
    • Automotive Manufacturing
    • Semiconductor Manufacturing Process
    • Research and Testing Laboratories
  • Technology
    • Glow Discharge Spectroscopy
    • Pressure-based Flowmetry
    • Quadrupole Mass Spectrometry
    • Raman Spectroscopy
  • Service
    • On-Site Support
    • Spare Parts and Consumables
  • Company
    • News
    • Events
    • Career
    • History
    • Corporate Culture
  • Contact
    • Contact Form
    • Worldwide Locations

Terms and Conditions Privacy Notice Cookies Imprint