Life Sciences

Providing sophisticated analytical tools to advance research, product development and quality in the Life Sciences industry

Life sciences or biological sciences mean areas of science that involve the scientific study of life, organisms and biomolecules. This huge field seeks to understand the complex and elaborate mechanisms that support life and helps preserve our lives by increasing the progress of Health (diagnostic analysis and treatment), the control of the environment, the analysis in pharmaceutical research and the quality control in agri-food. At HORIBA Scientific, we provide a wide range of breakthrough instruments and methods tailored to our customers to push the limits of imaginative science.

TERS on Functionalized Gold Nanostructures for Nano-scale Biosensing

Surface-enhanced Raman scattering (SERS) is a powerful plasmonics-based analytical technique for biosensing. SERS effect relies on nanostructures that need to be designed to maximize enhancement factors and molecular specificity. In addition to numerical modeling, an analytical tool capable of imaging localized enhancement would be an added value.

Absorbance spectrum of ISS before and after acidification measured with the Duetta

HORIBA’s Duetta, a CCD-based dual fluorescence/absorbance spectrometer is a very capable instrument for the determination of Chl A concentration by fluorescence due to its inherent sensitivity and ability to automatically correct for the inner filter effect (IFE), which ensures a very high dynamic range for such analysis. It also can be used to quantify the concentration of the standard stock solution by absorbance, thus eliminating a need for a dedicated UV-VIS spectrometer.

Exosomes are small extracellular vesicles, 30-150 nm in diameter, which have been determined to play a crucial role in extracellular signaling. They have been observed in both prokaryotic and eukaryotic organisms, meaning they are incredibly widely spread in nature. Exosomes bud off from their parent cells in a sealed package, taking the properties of their parent cell walls with them and encasing many intracellular components.

TERS Characterization of phospholipid bilayers and detection of nanoparticles

Phospholipid bilayers, major constituents of membranes act as a barrier of selective permeability for the nanoparticles now largely into our environment. Studying the interactions between nanoparticles and cellular membranes requires a molecular chemical probe with nanometer resolution capability.

Application note - Multimodal Hyperspectral Imaging for Nanotoxicological Applications

An imaging platform that combines Raman microscopy with enhanced darkfield and hyperspectral imaging technology was used to study lung tissue sections containing carbon nanotubes. It enabled easy identification of the regions containing the carbon nanotubes followed by spectroscopic characterization of chemical composition.

Gold nanorods are rod-shaped gold nanoparticles. Fig. 1 shows that gold nanorods have two surface plasmon bands in the directions of the short and long axes derived from their anisotropic shapes.

Fluorescence Emission spectra of transferrin at increasing concentrations

In this application note, we highlight the high sensitivity of the Duetta for measuring transferrin at very low concentrations. The Duetta spectrofluorometer combines both fluorescence and absorbance measurements simultaneously, thus providing key advantages for protein analysis. In parallel, we compare the fluorescence results obtained using the Duetta with absorbance results obtained with a dedicated low-volume, benchtop spectrophotometer.

Monitoring Biotinylated Adeno-Associated Virus (AAV) using A-TEEM

Adeno-Associated Viruses (AAVs) are becoming widely used as viral vectors to deliver cell and gene therapies and vaccines. As production methods scale to meet growing demand, more information is needed more quickly.

Protein A280 application

Duetta is an analytical instrument capable of recording both the fluorescence and the absorbance of a sample. Absorbance data provides concentration-dependant information on non-fluorescent compounds. Through its user-friendly software, Duetta allows different measurements related to biomolecules like DNA, RNA and proteins including protein concentration, DNA/RNA purity, finding the concentration of an unknown sample based on a standard-based calibration curve, Pass/Fail testing and all standard fluorescence and absorbance related measurements. All these functionalities are possible through dedicated applications in EzSpec™ software for Duetta.

New NIR DSS detectors in final QC at the HORIBA NJ Optical Spectroscopy Center in Piscataway, NJ.

This technical note serves as a guideline to selecting the best solid state detector with the Fluorolog-QM modular research spectrofluorometer for a given series of photoluminescence experiments.

Can we accurately and quickly measure the amount of carbon contained in the material?

The use of metal surfaces in conjunction with fluorescence molecules employing a plasmon effect, sometimes referred to as metal enhanced fluorescence, can be advantageous because of the possible enhancement of photophysical properties.

Identification and characterization of aeroallergens based on morphological and chemical features

The prevalence of allergies in the world is between 30 and 40%. Even though it exists medical treatments such as antihistaminic and desensitization this number is constantly increasing. Thus, in this application note, the identification and chemical characterization of aeroallergens by Raman microscopy will allow to prevent people who are affected by respiratory allergies of the presence of this type of allergens in indoor and outdoor air.

AFM-TERS measurements in a liquid environment with side illumination/collection

Atomic Force Microscopy (AFM) associated to Raman spectroscopy has proven to be a powerful technique for probing chemical properties at the nanoscale. TERS in liquids will bring promising results in in-situ investigation of biological samples, catalysis and electrochemical reactions.

In this study, we demonstrate the ViewSizer 3000’s capabilities as a next generation NTA based analysis instrument in order to accurately and efficiently measure and characterize exosomes via particle size and concentration.

The new HORIBA Duetta fluorescence and absorbance spectrometer offers many unique benefits for molecular spectroscopy. It is primarily thought of as a spectrofluorometer that combines absorbance and fluorescence spectroscopy to correct the fluorescence fingerprint for concentration-related effects. Duetta can also be used as a precise absorbance spectrometer. This application note explores the use of Duetta for a common absorbance application, the Protein A280 application.

Certain fluorescent molecules, known as molecular rotors, can be employed to estimate the local (nanoscale) viscosity in microheterogeneous systems by measurement of their fluorescence lifetime. This can be advantageous over the usual fluorescence anisotropy method, as the measurement is simpler and faster to perform. This is demonstrated using the HORIBA Scientific TemPro fluorescence lifetime system to monitor the gelation of silica produced using the sol‐gel technique.

The use of low molecular weight molecules in the industries of drug discovery and agri-food has become increasingly important over the course of a century of drug research and science development in agriculture and in pharmaceutical field.

In recent years, Spectroscopic Ellipsometry application is extended to the life science. In this article, we introduce two examples from this field: Biocompatibility of DLC films and demineralization and remineralization process of tooth surface.

Research in nanoscience has garnered much interest because of the different properties of small structures compared to the respective bulk material.

InGaAs/GaAs and InAs/GaAs quantum dots (QDs) have been identified as suitable candidates for various applications in the terahertz range by using their intraband carrier transitions.

A-TEEM™ for Qtracker® 655 quantum dots

Quantum dots (QDs) are semiconducting spheres in the size typically in the range of 1 to 10nm. The size of these small spheres give quantum dots the semiconducting properties and resulting photoluminescence that would not necessarily occur for the same material on larger scales.

The NanoLog has a reputation as the premier instrument for the exploration of single-walled carbon nanotubes (SWCNTs).

Silica is currently one of the most important industrial materials, whose nanoparticles are formed via a sol-gel process.

HORIBA Jobin Yvon’s spectrofluorometers have many applications in nanophotonics research: single-walled carbon nanotubes (SWNTs), quantum dots (QDs), and organic light-emitting diodes (OLEDs). Quantum confinement affects nanomaterials’ photoluminescence: when the semiconducting nanoparticle is smaller than the bulk material’s Bohrexciton radius, the bandgap energy is inversely proportional to the nanoparticle size.

Fluorescent pigments in living coral

The brightly-colored coral reefs that make scuba-diving and snorkeling so enjoyable are essential to the survival of much underwater life. Not only do reefs offer a haven for smaller fish to hide from larger predators, but also some fish actually survive by eating the reefs themselves. Reefs offer protection to plants and animals from the ravages of waves and ocean currents. Thus, when the reefs die, so do many other living creatures.

Monitoring Cell Culture Media Variability using A-TEEM Spectroscopy

With the rise of protein production using mammalian cell culture, it has become increasingly important to control the quality of the cell culture media for use in production processes. Cell culture media are usually prepared as aqueous solutions and should provide everything a cell line needs for optimal cell growth as well as product yield and quality.

Raman Spectroscopy was evaluated as a non-invasive method of analysis of sperm DNA and the influence of UV irradiation on the sperm. The results show that Raman Spectroscopy, combined with multivariate analysis provide the reproducible and accurate information on DNA of sperm and the effect and location of damage.

Fast and non-invasive methods for clinical and non clinical investigations for biological tissue are more and more required. Raman imaging at micro scale can answer to crucial questions about the monkey brain tissue morphology and structural evolution.

Selection of SpectraLED pulsed excitation sources

To access intrinsic amino acids, such as tryptophan, as probes, the UV excitation wavelengths for pulsed phosphorescence measurements have long been the preserve of low-repetition-rate gas-filled lamps or larger laser systems. Recent developments have enabled the use of interchangeable semiconductor diodes...

Molecular structure of PNA photolyase binding in close proximity to FAD cofactor.

The TRIAX and iHR series spectrometers used in Raman system configurations provide superior imaging performance with no re-diffracted light and maximized optical throughput.

Photoluminescence Spectroscopy of Quantum Dots

Quantum dots (QDs) have potential applications in optoelectronics, biosensing, biolabeling, memory devices, and sources of laser light.

HORIBA Jobin Yvon’s NanoLog® spectrofluorometer, specially optimized for recording near-IR fluorescence from nanoparticles, includes a double-grating excitation monochromator, imaging emission spectrograph with a selectable-grating turret, and a variety of detectors.

Multichannel scaling (MCS) single-photon-counting spectroscopy performed using HORIBA Jobin Yvon’s FluoroCube fluorescence lifetime system.

Tryptophan phosphorescence within protein molecules is gaining attention as a probe of protein dynamics and structure. The tryptophan phosphorescence lifetime, τ, varies with the protein molecule’s local environment and conformation.

Better Signal-to-Noise Ratios for Carbon Nanotube Spectra

Corrected emission spectra1 of carbon nanoparticles can provide excitation–emission matrices (EEMs) for a range of excitation wavelengths.

Fluorescence Spectra from Carbon Nanotubes

Single-wall carbon nanotubes (SWNTs), consisting of rolled-up single sheets of carbon atoms, have received much attention recently.

Traditionally, Raman has been a technique of the material scientist, physicist or chemist, but as instrumentation continues to evolve, the power of Raman in biological and medical applications is fast being realized, not least because of the high information content provided and an excellent tolerance for water.

Fluorescence of Molecular Beacons

Fluorescence measurements with HORIBA Scientific spectrofluorometers are a sensitive tool for probing biochemical interactions such as molecular beacons and DNA.

The majority of proteins are glycosylated: they possess oligosaccharide chains and are hence termed glycoproteins. Oligosaccharides, also called carbohydrate or sugar, are often quite large (as large as some protein domains for example) and they have many functions in molecular interactions.

Description of the advantages of combining the use of peptide chips with direct label-free detection as achieved by SPR imaging (SPRi).

This application note shows that the HORIBA Scientific SPRi platform is suitable for the analysis of aptamer-based molecular interactions. For this purpose, the interaction between human IgE protein, an antibody involved in allergic reactions, and a human IgE specific aptamer4 is presented as proof-of-concept.

Detecting Conformational Rotamers via TCSPC

Among the possible fluorescence biosensors for medical and biochemical monitoring and imaging are the flavonoids, compounds that occur in many plants and their products, such as tea, chocolate, and red wine.

Our SPRi technology (Surface Plasmon Resonance imaging), is able to measure multiplexed label-free biolo-gical interactions in a complex media such as serum.We will demonstrate the ability to monitor specific interactions between immobilized peptides and proteins issued from non purified immune sera, using a cystamine/glutaraldehyde SAM surface chemistry on the bio-chip surface. We chose to illustrate this ability by monitoring the interaction between an ovalbumin peptide fragment and an ovalbumin immunized serum.

The purpose of this proof of concept is to show that Surface Plasmon Resonance imaging (SPRi) is a suitable technique to detect allergens. Compared with other techniques, such as ELISA or Luminex, which are based on colorimetric or fluorescence detection, this technology does not require the labeling of antibodies.

HORIBA provides the pharmaceutical industry, biotech companies and academic research laboratories with high performance instrumentation based on SPRi technology (Surface Plasmon Resonance imaging). To demonstrate the power of this technology, we carried out an experiment based on an antibody-antigen interaction. Original surface chemistry combined with an electrochemical process allows the rapid coupling of biomolecules to the gold layer (polypyrrole co-polymerisation) on the top of a glass prism.

Rapid mixing accessories to perform stopped flow measurements have found application in characterizing interactions and reactions occurring in solution. Reactants are expelled from syringes, mixed and injected into a flowcell.

The potential health benefits stemming from the antioxidant activity of curcumin, commonly found in turmeric (Curcuma longa L), has attracted the interest of several research groups.

Polarized light striking a fluorescent molecule results in polarized fluorescence. This polarized emission gradually returns to unpolarized fluorescence depending on rotational diffusion and other factors. Anisotropy is directly related to the polarization, and is the ratio of the polarized light component to the total light intensity.

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

First name

Last name *

Company or Institution *

Postal code *

City

Country/Region *

State

Email address *

Phone

HORIBA Department

Your message *

I have read and agree to the HORIBA privacy notice

Browse Products

nanoPartica SZ-100V2 Series

nanoPartica SZ-100V2 Series

Nanoparticle Analyzer

OpenPleX

Manual label-free molecular interaction analysis machine Flexible Research Platform

LabRAM Odyssey

Confocal Raman Imaging & High Resolution Spectrometer

LabRAM HR Evolution

LabRAM HR Evolution

Confocal Raman Microscope

XploRA INV

Inverted Raman Microscope

XploRA™ PLUS

Raman Spectrometer - Confocal Raman Microscope

EzSpec Software

EzSpec Software

ViewSizer 3000

Simultaneous Multi-Laser Nanoparticle Tracking Analysis (NTA)

Aqualog - Water Treatment Plant Analyzer

Aqualog - Water Treatment Plant Analyzer

Automated Organic Analysis & Early Warning Sentinel

LAQUA 21 CFR Part 11 Software

LAQUA 21 CFR Part 11 Software

Ammonia Electrode Filling Solution

Ammonia Electrode Filling Solution

Chloride ion electrode (combination) 6560S-10C

Chloride ion electrode (combination) 6560S-10C

9425-10C (for general-purpose use)

9425-10C (for general-purpose use)

Reference Electrode 2060A-10T

Reference Electrode 2060A-10T

Standard type

Calcium Electrode Filling Solution

Calcium Electrode Filling Solution

Chloride Electrode Filling Solution

Chloride Electrode Filling Solution

Reference Electrode 2565A-10T

Reference Electrode 2565A-10T

Double-junciton type

LabRAM Soleil

Multimodal Confocal Raman Microscope

9300-10D ORP Electrode

9300-10D ORP Electrode

5402 DO Electrode Tip

5402 DO Electrode Tip

OCMA-550

Oil concentration meter

SPRi-Arrayer

Direct contact spotting

2.50 mmol/L Calcium Ion Standard Solution Y052H

2.50 mmol/L Calcium Ion Standard Solution Y052H

Nitrate Electrode Filling Solution

Nitrate Electrode Filling Solution

1.25 mmol/L Calcium Ion Standard Solution Y052L

1.25 mmol/L Calcium Ion Standard Solution Y052L

OCMA-500

Oil concentration meter

Potassium Electrode Filling Solution

Potassium Electrode Filling Solution

EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

LAQUAtwin pH-33

LAQUAtwin pH-33

Pocket Water Quality Meters

EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

LAQUAtwin pH-22

LAQUAtwin pH-22

Pocket Water Quality Meters

EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

3551-10D Conductivity Cell (Submersible Type)

3551-10D Conductivity Cell (Submersible Type)

LAQUAtwin pH-11

LAQUAtwin pH-11

Pocket Water Quality Meters

Chloride ion electrode tip 7660S

Chloride ion electrode tip 7660S

3552-10D Conductivity Cell (Submersible Type)

3552-10D Conductivity Cell (Submersible Type)

Fluoride ion electrode (combination) 6561S-10C

Fluoride ion electrode (combination) 6561S-10C

7541 DO Electrode Tip

7541 DO Electrode Tip

3553-10D Conductivity Cell (Submersible Type)

3553-10D Conductivity Cell (Submersible Type)

Fluoride ion electrode tip 7661S

Fluoride ion electrode tip 7661S

9551-20D DO Electrode

9551-20D DO Electrode

9382-10D Conductivity Cell (Submersible Type)

9382-10D Conductivity Cell (Submersible Type)

Ammonia electrode (combination) 5002S-10C

Ammonia electrode (combination) 5002S-10C

100 mg/L Ammonium Ion Standard Solution

100 mg/L Ammonium Ion Standard Solution

LAQUAtwin NO3-11C/NO3-11S/NO3-11

LAQUAtwin NO3-11C/NO3-11S/NO3-11

Pocket Water Quality Meters

9551-100D DO Electrode

9551-100D DO Electrode

3561-10D Conductivity Cell (Flow Type)

3561-10D Conductivity Cell (Flow Type)

HE-480H

Panel-mount type conductivity meter (conductivity meter)

1000 mg/L Ammonium Ion Standard Solution

1000 mg/L Ammonium Ion Standard Solution

Ammonia electrode membrane caps

Ammonia electrode membrane caps

5401 DO Electrode Tip

5401 DO Electrode Tip

3562-10D Conductivity Cell (Flow Type)

3562-10D Conductivity Cell (Flow Type)

Nitrate ion electrode (combination) 6581S-10C

Nitrate ion electrode (combination) 6581S-10C

100 mg/L Calcium Ion Standard Solution

100 mg/L Calcium Ion Standard Solution

LAQUAtwin K-11

Pocket Water Quality Meters

3573-10C Conductivity Cell (Flow Type)

3573-10C Conductivity Cell (Flow Type)

HE-200H

Field-installation type electric conductivity meter

1000 mg/L Calcium Ion Standard Solution

1000 mg/L Calcium Ion Standard Solution

Nitrate ion electrode tip 7681S

Nitrate ion electrode tip 7681S

LAQUAtwin Na-11

LAQUAtwin Na-11

Pocket Water Quality Meters

3574-10C Conductivity Cell (Flow Type)

3574-10C Conductivity Cell (Flow Type)

Potassium ion electrode (combination) 6582S-10C

Potassium ion electrode (combination) 6582S-10C

100 mg/L Chloride Ion Standard Solution

100 mg/L Chloride Ion Standard Solution

1000 mg/L Chloride Ion Standard Solution

1000 mg/L Chloride Ion Standard Solution

Potassium ion electrode tip 7682S

Potassium ion electrode tip 7682S

LAQUAtwin Salt-22

LAQUAtwin Salt-22

Pocket Water Quality Meters

Calcium ion electrode (combination) 6583S-10C

Calcium ion electrode (combination) 6583S-10C

100 mg/L Fluoride Ion Standard Solution

100 mg/L Fluoride Ion Standard Solution

LAQUAtwin Salt-11

LAQUAtwin Salt-11

Pocket Water Quality Meters

1000 mg/L Fluoride Ion Standard Solution

1000 mg/L Fluoride Ion Standard Solution

Calcium ion electrode tip 7683S

Calcium ion electrode tip 7683S

LAQUAtwin EC-33

LAQUAtwin EC-33

Pocket Water Quality Meters

100 mg/L Nitrate Ion Standard Solution

100 mg/L Nitrate Ion Standard Solution

Cyanide ion electrode 8001-10C

Cyanide ion electrode 8001-10C

1000 mg/L Nitrate Ion Standard Solution

1000 mg/L Nitrate Ion Standard Solution

LAQUAtwin EC-22

LAQUAtwin EC-22

Pocket Water Quality Meters

LAQUAtwin EC-11

LAQUAtwin EC-11

Pocket Water Quality Meters

Ammonia Ionic Strength Adjustor

Ammonia Ionic Strength Adjustor

Calcium Ionic Strength Adjustor

Calcium Ionic Strength Adjustor

Chloride Ionic Strength Adjustor

Chloride Ionic Strength Adjustor

LAQUA WQ-330-K

Handheld Water Quality Meters

HT-110

On-line TOC analyzer

Fluoride Ionic Strength Adjustor

Fluoride Ionic Strength Adjustor

Nitrate Ionic Strength Adjustor

Nitrate Ionic Strength Adjustor

9480-10C Long ToupH electrode (for large containers and long test tubes)

9480-10C Long ToupH electrode (for large containers and long test tubes)

Electrode protector cap (3 pcs/pack)

Electrode protector cap (3 pcs/pack)

9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

Chloride ion electrode 8002-10C

Chloride ion electrode 8002-10C

Potassium Ionic Strength Adjustor

Potassium Ionic Strength Adjustor

9418-10C Micro ToupH electrode (for low-volume samples)

9418-10C Micro ToupH electrode (for low-volume samples)

9415-10C Standard ToupH electrode (for general laboratory application)

9415-10C Standard ToupH electrode (for general laboratory application)

Sulfide ion electrode 8003-10C

Sulfide ion electrode 8003-10C

Printer (for GLP/GMP compliance)

Printer (for GLP/GMP compliance)

Iodide ion electrode 8004-10C

Iodide ion electrode 8004-10C

Bromide ion electrode 8005-10C

Bromide ion electrode 8005-10C

Copper ion electrode 8006-10C

Copper ion electrode 8006-10C

9615S-10D Standard ToupH electrode (for general laboratory application)

9615S-10D Standard ToupH electrode (for general laboratory application)

Cadmium ion electrode 8007-10C

Cadmium ion electrode 8007-10C

Digital simulator X-51

Digital simulator X-51

Lead ion electrode 8008-10C

Lead ion electrode 8008-10C

9618S-10D Micro ToupH electrode (for low-volume samples)

9618S-10D Micro ToupH electrode (for low-volume samples)

Digital simulator X-52

Digital simulator X-52

Thiocyanate ion electrode 8009-10C

Thiocyanate ion electrode 8009-10C

9680S-10D Long ToupH electrode (for large containers and long tubes)

9680S-10D Long ToupH electrode (for large containers and long tubes)

USB cable

9651-10D (for field testing)

9651-10D (for field testing)

Silver ion electrode 8011-10C

Silver ion electrode 8011-10C

9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

AC adapter cable set

AC adapter cable set

Nitrate ion electrode 8201-10C

Nitrate ion electrode 8201-10C

LCD protection sheet

LCD protection sheet

9625-10D (for general-purpose use)

9625-10D (for general-purpose use)

LAQUA WQ-320-K

Handheld Water Quality Meters

Potassium ion electrode 8202-10C

Potassium ion electrode 8202-10C

LAQUA WQ-310-K

Handheld Water Quality Meters

Protection cover

Protection cover

LAQUA PD220

Handheld pH/ORP/Dissolved Oxygen/Temperature Meter

Calcium ion electrode 8203-10C

Calcium ion electrode 8203-10C

LAQUA PD210

Handheld pH/ORP/Dissolved Oxygen/Temperature Meter

Electrode hook for D-70 Series, ES-71, and OM-71

Electrode hook for D-70 Series, ES-71, and OM-71

LAQUA PC220

Handheld pH/ORP/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

LAQUA PC210

Handheld pH/ORP/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

LAQUA EC220

Handheld Conductivity/Resistivity/Salinity/Total Dissolved Solids/Temperature Meter

LAQUA DS-72

Benchtop Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

9630-10D (for low conductivity samples)

9630-10D (for low conductivity samples)

LAQUA EC210

Handheld Conductivity/Resistivity/Salinity/Total Dissolved Solids/Temperature Meter

FA-70A Integrated Electrode Stand

FA-70A Integrated Electrode Stand

LAQUA F-74

Benchtop pH/ORP/Ion/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

LAQUA DO220

Handheld Dissolved Oxygen/Temperature Meter

9631-10D (for hydrofluoric acid or HF samples)

9631-10D (for hydrofluoric acid or HF samples)

LAQUA DO210

Handheld Dissolved Oxygen/Temperature Meter

LAQUA F-73

Benchtop pH/ORP/Ion/Temperature Meter

LAQUA PH220

Handheld pH/ORP/Temperature Meter

9632-10D (for strong alkali samples)

9632-10D (for strong alkali samples)

FA-70S Electrode stand (adjustable type)

FA-70S Electrode stand (adjustable type)

LAQUA PH210

Handheld pH/ORP/Temperature Meter

LAQUA F-72

Benchtop pH/ORP/Ion/Temperature Meter

DP-50S Electrode stand

DP-50S Electrode stand

6367-10D (for high accuracy pH measurement)

6367-10D (for high accuracy pH measurement)

DP-70S Electrode Stand

DP-70S Electrode Stand

6252-10D (for food samples)

6252-10D (for food samples)

Glass Electrode 1066A-10C

Glass Electrode 1066A-10C

Standard type

Glass Electrode 1076A-10C

Glass Electrode 1076A-10C

For measurement of low-conductivity water and non-aqueous solvents.

6069-10C (for very slender test tubes)

6069-10C (for very slender test tubes)

6261-10C (for flat surface measurement)

6261-10C (for flat surface measurement)

XGT-7200

X-ray Analytical Microscope