Energy Dispersive X-ray Fluorescence Analyzer
HORIBA continues it's innovation in the petroleum market by proudly teaming with Olympus Innov-X to promote the X-5000 Mobile XRF Analyzer. The X-5000 is a rugged, fully integrated closed beam portable EDXRF system that offers the power and performance of a traditional benchtop XRF, but is designed for transportable operation. Using a Silicone Drift Detector, low PPM detection limits can be achieved for many elements in a variety of sample types and matrices. Applications include fuels, additives, and wear metal oils to crude oils, water, coke, and coal allow this easy to use analyzer to be a fast, flexible solution to traditional testing methods.
Detectable elements to concentrations of 100% are: Aluminum, Antimony, Barium, Cadmium, Calcium, Chlorine, Chromium, Copper, Iron, Manganese, Molybdenum, Nickel, Phosphorous, Potassium, Silicon, Silver, Sulfur, Tin, Titanium, Vanadium, and Zinc.
*Available in the Americas. For additional information, please contact us.
The X-5000 integrates advanced 3-beam (kV-mA-filter) technology with a silver anode X-ray tube and large area Silicon Drift Detector (SDD). This powerful EDXRF combination is optimized to analyze 20+ elements in oils along with providing the highest possible sensitivity for sulfur. Analyzers are pre-calibrated with NIST standards in a clean mineral oil matrix without interfering elements.
A sample guide/holder is attached to the X-5000 sample deck to accurately and securely place sample cups or bottles with a secondary spill containment for liquid samples. Users can analyze samples easily using default settings. Calibrations can be adjusted accordingly for applications that require custom standards for control over elemental correlation.
Use it around the work site, at the inspection station, on the production line, or on the lab bench. This self-contained, closed-beam unit provides the ultimate in user safety. The optional three-hour Li-ion battery pack provides true field use capablity. Weighing only 20lbs, the X-5000 can go where it is needed.
|Principle||Energy Dispersive X-ray Fluorescence|
|Sample||Petroleum and water based|
|Elements||Aluminum, Antimony, Barium, Cadmium, Calcium, Chlorine, Chromium, Copper, Iron, Manganses, Molybedenum, Nickel, Phosphorous, Ptassium, Silicon, Silver, Sulfur, Tin, Titanium, Vanadium and Zinc.|
|Detection Range||Low PPM to 100%|
|Calibration||Factory calibrated or user defined with 1 point minimum|
|Sample Requirement||10 mL liquid and 1 mg solid|
|Measurement Time||User programmable up to 360 seconds|
|External Output||USB, RS-232, 9 in Serial, Ethernet, and 15 pin monitor|
|Power||100-240V AC, 50/60 Hz|
|Battery||3 hour Li-ion optional battery pack|
|Dimensions||12" x 13" x 8" in / 30 x 33 x 20 cm|
|Sample Chamber||12" x 8" x 5" in / 30 x 20 x 12 cm|
|Weight||25 lbs/11.5 Kg|
Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.