Industry
FES-310L Sanitary Conductivity Sensor (Flow Through type)
Overview
Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance.
The FES-310L Series sanitary conductivity sensors, which are used in conjunction with the HE-960HS conductivity converter, deliver improved yields and accurate CIP terminal management.
Features
- Straight structure without differences in levels or protuberances
Ensures low residual elements, even with high viscosity products, and enables production that maintains product shape, including those with solids - Buff-polished inner surface
- Line-up of 6 sensor sizes: 1.5 S, 2 S, 2.5 S, 3 S, 4 S, and 4.5 S
- SUS316L, PPS, and FKM are used as materials for contact with fluids
Manufactured by HORIBA Advanced Techno
Specifications
Model | FES-310 -L-S-SN- 1.5S | FES-310 -L-S-SN- 2.0S | FES-310 -L-S-SN- 2.5S | FES-310 -L-S-SN- 3.0S | FES-310 -L-S-SN- 4.0S | FES-310 -L-S-SN- 4.5S |
---|---|---|---|---|---|---|
Measurement principle | Alternative four-pole method | |||||
Cell constant | Approx. 0.1 /cm | |||||
Measurement range | 0 to 500 mS/cm (complies with the specifications of the conductivity converter) | |||||
Temperature range under normal use | 0 to 110°C | |||||
Pressure range | 0 to 1 MPa | |||||
Ambient operating temperature / humidity | 0 to 50°C, 95% RH or lower | |||||
Structure | IP67 or equivalent | |||||
Materials for contact with fluids | SUS 316L, PPS, FKM | |||||
Steam sterilization | 140°C / 0.6 MPa, within 60 minutes | |||||
Connection bore diameter | IDF / ISO | IDF / ISO | IDF / ISO | IDF / ISO | IDF / ISO | IDF / ISO |
Weight | Approx. 2.5 kg | Approx. 2.5 kg | Approx. 3.5 kg | Approx. 5.0 kg | Approx. 6.0 kg | Approx. 8.0 kg |
Cables | 10 m Y-shaped terminal |