Industry

FS-01FC Sanitary Conductivity Sensor (Flow Through type) for Low Concentrations FS-01FC-SL Series

FS-01FC Series

Overview

Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance.
The FS Series sanitary conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals.

Features

  • Straight structure without differences in levels or protuberances
    Ensures low residual elements, even with high viscosity products, and enables production that maintains product shape, including those with solids
  • Measures conductivity in 4 ranges, from 0 up to 2000 µS/cm, with a single sensor
  • Buff-polished inner surface
  • Line-up of 5 sensor sizes: 15 A, 1 S, 1.5 S, 2 S, and 2.5 S
  • Tough structure that can withstand steam sterilization at 140 °C
  • SUS316L, PTFE, and FKM are used as materials for contact with fluids

Manufactured by HORIBA Advanced Techno

Specifications

Model

FS-01FC-
SL15A

FS-01FC-
SL1S

FS-01FC-
SL1.5S

FS-01FC-
SL2.0S

FS-01FC-
SL2.5S

Measurement principle

Alternative two-pole method

Cell constant

Approx. 0.1 /cm

Measurement range

0 to 2000 µS/cm (complies with the specifications of the conductivity converter)

Measurement temperature

0 to 100°C (complies with the specifications of the conductivity converter)

Pressure range

0 to 1 MPa

Ambient operating temperature / humidity

0 to 50°C, 95% RH or lower

Structure

IP67 or equivalent

Materials for contact with fluids

SUS 316L, PTFE, FKM

Steam sterilization

140°C / 0.6 MPa, within 60 minutes

Connection bore diameter

ISO 15 A ferrule

IDF / ISO
1 S ferrule

IDF / ISO
1.5 S ferrule

IDF / ISO
2 S ferrule

IDF / ISO
2.5 S ferrule

Weight

Approx.
1.0 kg

Approx.
1.0 kg

Approx.
1.3 kg

Approx.
1.8 kg

Approx.
2.5 kg

Cables

CK-10M, CK-20M, CK-30M (Y-shaped terminal)