SLFA-2100/2800 X-ray Fluorescence Sulfur-in-Oil Analyzers

Overview

The SLFA-2100/2800 are designed specifically to meet the recent demanding needs of measuring the new low sulfur fuels, diesel and RFG.

Using the X-ray fluorescence technique, fast and accurate measurements can be carried out in compliance with the ASTM D4294 method, either in the lab or in the field.

A detection limit of 5 ppm sulfur takes you to new realms of measurement sensitivity. HORIBA's high sensitivity analyzer makes quick, accurate measurements of petroleum fuel samples from very low to high sulfur concentrations - i.e., all the way from gasoline to heavy fuel oils. A large, easy-to-read LCD screen, simple function keys, alphanumeric keypad and other features make the SLFA-2100/2800 Series so easy to use.

The SLFA-2800 has an automated turntable to measure up to eight samples unattended, while the SLFA-2100 is a single-sample version.

Features

  • Wide measurement range (0-9.999%) is acceptable for very small content as in diesel oil or high sulfur content as in heavy oil.
  • Calibration graphs have been extended and the analyzer selects automatically out of seven scales (0.002/0.01/0.05/…/10%).
  • High precision measurement (Repeatability:1.6ppm, Lower detection limit: 5ppm) Due to the miniature X-ray tube, extremely precise results can be achieved without purging of He or another gas and this system also include a correction function for temperature and atmospheric pressure without He purge.
  • SLFA-2800 is equipped with a turntable, which makes sequential measuring of up to eight samples.
  • Standards applied to device measurement functions: JIS K2541, JIS B7995(Japan), ASTM D4294(USA), ISO 8754

Manufactured by HORIBA

Specifications

SLFA-2100/2800

Principle: X-ray fluorescent analysis

Sample: Sulfur content in petroleum products, such as heavy oil, naphtha, crude oil, etc.

Element: Sulfur

Range: 0-9,999%

Detection Limit: 5 ppm or less

Accuracy
Less than 5 ppm (with a sample containing 1% sulfur)
Less than 1.6 ppm (with a sample containing 0% sulfur)

Calibration: Calibration made using any standard sample (2 to 20 calibration points)

Sample requirement: 4-10 ml

Measurement time: User set from 10 to 600 seconds

External output: Printout of results and digital data output(RS-232C interface)

Power supply: 100 V AC to 240 V±10%, 50/60 Hz

Power comsumptions: 150 VA

Mass: Approx 21kg(SLFA-2100), 24kg(SLFA-2800)

Dimensions
430 (W) x 500 (D) x 230 (H) mm
19,9(W) x 19,7(D) x 9,1(H) in

Standards applied to device measurement functions: JIS K2541, JIS B7995(Japan), ASTM D4294(USA), ISO 8754

Schematics

SLFA-2100/2800 Dimensional outline drawing (mm)

Consumables

Part numbers

Part Name

Model Name

1

350254

Mylar Film (Box of 100)

All SLFA Products

2

357026

Printer

SLFA-1100, 1800, 1100H, 1800H, 2100 & 2800

3

383611

Thermo paper

SLFA-1100, SLFA-1800, 1100H, 1800H, 2100 & 2800

4

526804

2 piece sample cell  (Box of 48)

All SLFA Products

5

530867

Lamp set

SLFA-2100 & SLFA-2800

6

530973

Lind Conditioner

All SLFA Products

7

9038001800

Lamp set

SLFA-1100H & SLFA-1800H

8

9038001900

Lamp set

SLFA-20

9

9038002000

Thermo paper

SLFA-20

10

201410-1

Printer Kit

Upgrade printer kit for SLFA-20

11

U801316200

Printer Kit

SLFA-20


Related Products

EMIA-8100 series

EMIA-8100 series equipped with electrical resistance furnace measures carbon and sulfur contained...

XGT-7200

Single point analysis and automated hyperspectral imaging.

Dual vacuum modes.

Spot sizes from 1.2...

XGT-5200WR

High sensitivity XRF qualitative and quantitative analysis with an X-ray imaging...

XGT-5200

Single point analysis and automated imaging.

Atmospheric pressure analysis.

Spot sizes from 1.2...