Industry
details
APNA-370 Ambient NOx Monitor
Overview
The APNA-370 continuously monitors atmospheric NO, NO2 and NOx concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of continuous monitoring and instantaneous analysis of gas in its unaltered state, has been a preferred method for monitoring the atmospheric pollution.
Features
The APNA-370 uses a combination of the dual cross flow modulation type chemiluminescence principle and the referential calculation method.
This gives it the advantages of the single-detector method plus the ability to do continuous measurements of NOX, NO, and NO2. The design gives great stability and extremely high sensitivity (0.1 ppm F.S.)
Standard equipment includes a drier unit with an automatic recycle function to provide dry ambient air as the ozone source. This makes long-term continuous measurements possible.
The detector uses a silicon photodiode sensor to reduce size and prolong working life.
All the necessary features are built right into a single rack-sized unit, including a reference-gas generator, an ozone-source drier unit, an ozone decomposer, and a sampling pump. No supplemental gas is required.
Manufactured by HORIBA
Specifications
Principle | Cross flow modulation type, reduced pressure chemiluminescence (CLD) |
Application | NO2, NO and NOX in ambient air |
Range | Standard ranges: 0-0.1/0.2/0.5/1.0 ppm; auto range ~ manual range selectable; |
Repeatability | ±1.0% of F.S. |
Linearity | ±1.0% of F.S. |
Sample gas flow rate | Approx. 0.8L/min |
Indication | Measured value, range, alarm, maintenance screen |
Alarms | During AIC, zero calibration error, span calibration error, temperature error in converter, etc. |
On-screen messages are available in four languages | English, German, French, and Japanese. |
Input/output | • 0-1 V/0-10 V/4-20 mA, to be specified (2 systems: either (1) momentary value and integrated or (2) moving average value) |
Power | 100/110/115/120/220/230/240 VAC, 50/60 Hz (to be specified) |
Dimensions | 430(W) x 550(D) x 221(H) mm |
Mass | Approx. 20 kg, |
** U.S. EPA designation RFNA-0506-157
Brochures
AP-370 series Air Pollution Monitor Brochure uploaded on 2013/12/20 (PDF:1.2MB)