Measurement Principle | Particulate Concentration by Beta Ray Attenuation |
Application | PM10 or PM2,5 or TSP Measurement |
Range | 0-1,000mg/m3(standard), 0-1.000µg/m3 0-100, 200, 250, 500, 2000, 5000, 10.000µg/m3(special application) |
Lowest Detection Limit (1h) | < 4,8µg/m3 |
Lowest Detection Limit (24h) | < 1,0µg/m3 |
Measurement cycle time | 1 hour |
Flow Rate | 16,70 liters/minute |
Filter Tape | Glass fiber filter |
Span Check | Nominally 800µg/cm2 |
| Beta Source | C-14 (carbon-14), 60 μCi ±15 μCi (< 2.22 X 106 Beq), Half-Life 5730 years. |
| Beta Detector Type | Photomultiplier tube with scintillator |
| Operation Temperature | 0° to +50°C |
| Ambient Temperature | -40° to +55°C standard. Optional -50 °C temperature sensors available |
Ambient Humidity | 0 to 90% RH, non-condensing |
Data Interface | RS-232, LAN connecting terminal(TCP/IP), Analog (0-10V, 4-20mA, 0-16mA) |
Power | AC100 - 230 VAC± 10V, 50/60 Hz, approx. 0,4kW |
Dimensions | 310(H) x 430(W) x 400(D) mm |
Mass | 24.5 kg without Accessories |
APDA-371
Ambient Dust Monitor
Particulate matter contaminates our atmosphere in various ways. It can for instance be generated by different industrial production processes,waste combustion, coal mining or automobile exhausts. The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Each hour, a small carbon-14 element emits a constant source of high-energy electrons (known as beta rays) through a spot of clean fillter tape. These beta rays are detected and counted by a sensitive scintillation detector to determine a zero reading. The APDA-371 automatically advances this spot of tape to the sample nozzle, where a vacuum pump then pulls a measured and controlled amount of dust-loaded air through the filter tape. Hourly this dirty spot is placed back between the beta source and the detector thereby causing an attenuation of the beta ray signal which is used to determine the mass of the particulate matter on the filter tape.
The APDA-371 Air Pollution Dust Analyzer for Suspended Particulate Matter (SPM) ensures long term stability and self-diagnostic capabilities as well as efficient collection of fluorine resin tape. The measurement principle operates according to EU and EPA regulations and is also type approved by TueV.