Semiconductor Page Heading

Deposition

Atomic Layer Deposition (ALD)

Atomic layer deposition (ALD) is a thin-film deposition technique based on the sequential use of a gas phase chemical process. ALD is considered a subclass of chemical vapour deposition. The majority of ALD reactions use two chemicals, typically called precursors. These precursors react with the surface of a material one at a time in a sequential, self-limiting, manner. Through the repeated exposure to separate precursors, a thin film is slowly deposited. ALD is a key process in the fabrication of semiconductor devices, and part of the set of tools available for the synthesis of nano materials. 

Plasma-Enhanced ALD is a technique where plasma is used to enhance an atomic layer deposition (ALD) process, forming a thin-film coating. Like standard ALD, PEALD reacts specific chemical precursors but also cycles an RF-plasma to better control chemical reactions within the process. This allows high levels of conformality in production. It also requires a much lower temperature than standard ALD, making it suitable for temperature-sensitive materials. 

Chemical Vapor Deposition (CVD)

Chemical vapor deposition (CVD) is a deposition method used to produce high quality, high-performance, solid materials, typically under vacuum. The process is often used in the manufacture of semiconductors and in the production of thin films. 

In typical CVD, the substrate is exposed to one or more volatile precursors, which react and/or decompose on the substrate surface to produce the desired deposit. CVD has an extended family of processes which build upon the primary principles of CVD most commonly these are: 

Atmospheric pressure CVD (APCVD) 

Low-pressure CVD (LPCVD) 

Ultrahigh vacuum CVD (UHVCVD)

Aerosol assisted CVD (AACVD) 

Direct liquid injection CVD (DLICVD)

Plasma-Enhanced CVD (PECVD) 

Remote plasma-enhanced CVD (RPECVD)

Atomic-layer Deposition. 

Metalorganic chemical vapor deposition (MOCVD) 

Physical Vapor Deposition (PVD)

Physical vapor deposition (PVD) describes a variety of vacuum deposition methods which can be used to produce thin films and coatings. PVD is characterized by a process in which the material goes from a condensed phase to a vapor phase and then back to a thin film condensed phase. The most common PVD processes are sputtering and evaporation. PVD is used in the manufacture of items which require thin films for mechanical, optical, chemical or electronic functions. 

Sputtering techniques include; Magnetron, Ion Beam, Reactive, Ion Assisted, Gas Flow. 

Evaporation involves two basic processes: a hot source material evaporates and condenses on the substrate. 

Fluid Controller & Module

D700MG
more D700MG

High Speed & Precision Pressure Insensitive Mass Flow Module

D700WR
more D700WR

Wide Range Pressure Insensitive Mass Flow Module

SEC-E Series
more SEC-E Series

Mass Flow Controller

SEC-N100 Series
more SEC-N100 Series

Digital Mass Flow Controller

CRITERION D500
more CRITERION D500

Pressure Insensitive Mass Flow Module

DZ-100
more DZ-100

Ultra-thin Mass Flow Controller

SEC-Z500X Series
more SEC-Z500X Series

Multi Range/Multi Gas Digital Mass Flow Controller

SEC-Z700S Series
more SEC-Z700S Series

New concept Pressure Insensitive Mass Flow Controller

FS-3000
more FS-3000

Thermal Flow Splitter

PV Series
more PV Series

Piezo Actuator Valve

UR-Z700 Series
more UR-Z700 Series

Digital Automatic Pressure Regulator

Liquid Precursor Vaporizer

MV-2000
more MV-2000

Mixed Injection System Liquid Vaporizer

VC Series
more VC Series

Direct Liquid Injection System

LSC series
more LSC series

Compact Baking System

LE Series
more LE Series

Large Flow Liquid Source Vaporization Control System

MI-1000/MV-1000
more MI-1000/MV-1000

Mixed Injection System Liquid Vaporizers

XF Series
more XF Series

Digital Liquid Mass Flow Meters

LF-F/LV-F Series
more LF-F/LV-F Series

Digital Liquid Mass Flow Meters / Controllers

Process Monitor & Controller

VG-200S
more VG-200S

Capacitance Manometer

IR-300
more IR-300

Vapor Concentration Monitor

IR-400
more IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

RU-1000
more RU-1000

Plasma Emission Controller

VCC-100
more VCC-100

Vapor Concentration Controller

Micropole System
more Micropole System

Residual Gas Analyzer

IT-270
more IT-270

High-Accuracy Infrared Thermometer [Built-in type]

IT-470F-H
more IT-470F-H

High-Accuracy Infrared Thermometer [Built-in type]

EV 2.0 Series
more EV 2.0 Series

Endpoint / Chamber Health Monitor based on Optical Emission Spectroscopy and MWL Interferometry

EV-140C
more EV-140C

Optical Emission Spectroscopy Etching End-point Monitor

OES-Star
more OES-Star

UV-VIS-NIR Spectrometer

PoliSpectra® M116 MultiTrack Spectrometer
more PoliSpectra® M116 MultiTrack Spectrometer

Multispectra, Multifiber, Multichannel Imaging spectrometer with 8-16-32 Simultaneous UV-NIR Spectra

VU90 Spectrometer
more VU90 Spectrometer

Most Compact Vacuum UV Back-Illuminated CCD Spectrometer (VUV-FUV)

VS70-MC
more VS70-MC

Miniature Multi Communication UV-NIR Spectrometer

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

Corporate