Semiconductor Page Heading

Wet Process


After chemical treatment of semiconductor wafers for cleaning, etching or stripping applications, or MEMS device KOH/HF etching applications, the process chemicals should be completely removed from the surface in order to stop the chemical reaction and take away chemical residues. Chemistry is still covering the wafer surface, in particular within recess structures of the topology (moats, trenches) resulting in continuation of the chemical process outside the bath. This is critical for etch applications, since over-etching might occur destroying the pattern and causing significant yield loss. Custom plastic tanks, PFA tanks are the common choices for quick dump rinsing steps.

Three types of rinsing are used in semiconductor manufacturing, depending on the tool type and application:

  • Overflow rinsing: immersion of wafers into a rinse bath with continuous introduction of water from the bottom of the tank and overflowing at the top rim.
  • Spray rinsing: Dispense of ultra pure water through spray nozzles directly onto the wafer at variable flow, pressure or temperature in a single pass mode (standard process of single wafer equipment)
  • Quick dump rinsing: a combination of the above for wet benches consisting of placing the wafer into an overflowing rinse tank, dump the ultra pure water in a very fast manner and refill the tank by spray and /or fill from the bottom.

Related Products

more CS-100 Series

Stand-alone Type Chemical Concentration Monitor

more CS-100F1 Series

Fiber Optic Type Chemical Solution Concentration Monitor

more MacroRAM™

Affordable Benchtop Raman Spectrometer

more Aqualog - A-TEEM Industrial QC/QA Analyzer

A Simple, Fast, “Column Free” Molecular Fingerprinting Technology

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.