EMIA-Pro

탄소/유황 분석기

HORIBA의 최신 탄소/유황 분석기인 EMIA-Pro는 HORIBA의 NDIR 기술과 과거 EMIA 시리즈에서 얻은 풍부한 경험을 기반으로 탄생했습니다.
향상된 세척 성능, 내구성, 운용성 및 효과적인 유지보수 기능은 측정 작동 시간을 줄여 고객의 개발 시간 및 생산 시간을 단축시킵니다.
또한, 고객 친화적인 소프트웨어 ‘3 네비게이션’을 새롭게 탑재하여 누구나 쉽게 전문적인 분석가가 될 수 있습니다.

Segment: Scientific
Manufacturing Company: HORIBA, Ltd.

<획기적으로 줄어든 유지보수 시간 >

유지보수 시간은 기존과 비교해서 1/2로 줄었습니다. 부품의 개수를 줄이고 스마트한 기계 설계로 30분이면 가능합니다.   

도가니 스탠드 주변의 플랫 디자인

  

                전기로(상부)                                       전기로(하부)

<더욱 좋아진 측정 효율>

하나의 측정 주기인 "분석 시작-시료 연소-결론 도출-클리닝" 을 실행하는 시간이 70초면 끝납니다. (약 1시간 동안  50회 측정 가능)    

 

 

<장기적인 내구성>

새롭게 개발된 독특한 클리닝 설계(특허 출원 중)는 필터에 있는 먼지를 완벽하게 제거해줍니다. 이에 사용자는 200회 정도 측정을 할 동안 별다른 유지 보수 없이 EMIA를 간단하게 사용할 수 있습니다.  

   

               측정 전                                    약 200회 측정 후

<개선된 소프트웨어>

"누구나 손쉽게 사용할 수 있는 소프트웨어"를 목표로 기능만큼 레이아웃과 운영 메뉴에 신경을 썼습니다. 자체 진단 모니터는 연결된 디바이스의 상태 확인, 알람 기능을 확인하고 확장된 3 네비게이션은 일일 작업을 더욱 쉽게 도와줍니다. 

* 분석 네비게이션

해당 기능은 호리바의 경험과 노하우를 바탕으로 최상의 분석 상태를 제안해줍니다. 

* 문제해결 네비게이션

자동 진단 시스템 및 문제해결 네비게이션입니다. 

* 유지보수 네비게이션

사진과 동영상을 통한 정기적인 유지보수 작업을 지원합니다. 

 

<업그레이드>

사용자가 원한다면 설치 후에라도 언제든지 시스템의 기능을 확장할 수 있습니다.

* 초저농도 탄소 측정을 위한 운반 기체 청정기

* 자동 샘플러 (20가지 포지션)

* 할로겐 트랩 장치

   HORIBA 제조

 

 

Contents

EMIA-Pro

샘플 요구량

1g

평균 측정 시간

70 seconds/cycle

탄소

Meas. Range (m/m)

1.6 ppm - 6.0%

Blank accuracy

σ≦ 0.8 ppm

유황

Meas. Range (m/m)

2.0 ppm - 1.0%

Blank accuracy

σ  ≦ 1 ppm

시료 측정 정확도

Carbon

SD ≦ 2.0 ppm 
or RSD≦1.0%

Sulfur

SD ≦ 2.0 ppm 
or RSD≦1.5%

유틸리티

Carrier gas

Oxygen 
(Purity; 99.5%, Pressure; 0.3MPa)

Operation gas

Nitrogen 
(Purity; 99.5%, Pressure; 0.35MPa)

Power

200/220/240V, 50/60Hz, 5kVA

규격

Main unit*

499(W) x 724(D) x 710(H) mm

중량

Main unit

approximately 134 kg

데이터 처리 및 운영

USB data communication with PC Windows 8.1
Touch panel or Key board and mouse operation

모델명

EMIA-20P: Carbon/Sulfur
EMIA-21P: Carbon
EMIA-22P: Sulfur

참고) "ppm" 은 mg/kg 동일.

* 배관 부품, 돌출 부분(D:79mm), 유량계를 제외하고는 뒷면에 위치함.

악세사리

도가니 예열 장치

도가니 예열 장치인 FK-100은 분석 이전 세라믹 도가니를 10분 동안 1100도로 가열하기 위한 자동 수송 기능을 탑재했습니다.

 

소모품

세라믹 도가니

고정밀 분석을 위한 Low carbon blank 및 high dimension tolerance

 

가속장치

안정적 분석 지원을 위한 고순도 재료: 텅스텐(W), 주석(Sn), 구리(Cu), 철(Fe)

외형도

Quantitative analysis of carbon contained in bone substitute material
Quantitative analysis of carbon contained in bone substitute material
Can we accurately and quickly measure the amount of carbon contained in the material?
Quantitative analysis of carbon and sulfur in tires
Quantitative analysis of carbon and sulfur in tires
To accurately and quickly measure the amount of carbon and sulfur contained in the material.
Measurement of Carbon and Sulfur in Cement
Measurement of Carbon and Sulfur in Cement
This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.
Measurement of Sulfur in Rubber
Measurement of Sulfur in Rubber
Sulfer is added in the natural rubber to produce plastic materials. However, it is important to measure the sulfer contained in the rubber to define the chemical and mechanical properties of the final product.
Measurement of Carbon in Ferrosilicon
Measurement of Carbon in Ferrosilicon
Ferrosilicon is added as a deoxidant and as an alloying element to steel, that require a special low carbon content. The Low Carbon in Ferrosilicon decreases the electrical conductivity and magnetostriction of electrical steels.
Quality Assurance for the Analysis of Steel by Gas Component Analysis
Quality Assurance for the Analysis of Steel by Gas Component Analysis
Sample Preparation and Sampling Methods for the Gas Analysis of Steel
Sample Preparation and Sampling Methods for the Gas Analysis of Steel
Measurement of Carbon and Sulfur in Copper
Measurement of Carbon and Sulfur in Copper
Copper in reddish metal, it is malleable, ductile and an extremely good conductor of both heat and electricity. Copper metal is widely used for electrical wiring, water piping, and corrosion resistant parts, either pure or in alloy such as brass and bronze. Carbon and Sulfur are considered as impurities, so it is important to measure and check the Copper purity.
Measurement of Carbon and Sulfur in Titanium Oxide
Measurement of Carbon and Sulfur in Titanium Oxide
Titanium oxide are used primarily in the production of paints and plastics and are also used in paper, priniting inks, cosmetics, textiles and food stuffs.
Carbon Analysis: Organic and Inorganic Carbon in Soils
Carbon Analysis: Organic and Inorganic Carbon in Soils
The aim of this application note is to explain the determination of organic and inorganic carbon in soils and how to prepare samples to eliminate inorganic carbon (carbonates) in these soils.

제품 문의

HORIBA제품의 자세한 정보를 원하시면, 아래의 양식에 내용을 입력을 부탁드립니다.

* 는 필수입력항목입니다.

Related products

EMGA-Expert
EMGA-Expert

산소/질소/수소 분석기

EMGA-Pro
EMGA-Pro

산소/질소/수소 분석기

EMIA-Expert
EMIA-Expert

탄소/황 분석기

EMIA-Pro
EMIA-Pro

탄소/유황 분석기

EMIA-Step
EMIA-Step

탄소/황 분석기 (인덕션 퍼니스 타입)

LabRAM Soleil
LabRAM Soleil

Raman Microscope

SLFA-60
SLFA-60

X선 형광 유황 분석기

SLFA-6000
SLFA-6000

X선 형광 유황 분석기

XploRA™ PLUS
XploRA™ PLUS

Raman Spectrometer - Confocal Raman Microscope

EMIA-Expert
EMIA-Expert

탄소/황 분석기

EMIA-Pro
EMIA-Pro

탄소/유황 분석기

EMIA-Step
EMIA-Step

탄소/황 분석기 (인덕션 퍼니스 타입)

51 series
51 series

방폭형 가스 분석기

AP-370 series
AP-370 series

Air Pollution Monitor

EMGA-Expert
EMGA-Expert

산소/질소/수소 분석기

EMGA-Pro
EMGA-Pro

산소/질소/수소 분석기

EMIA-Expert
EMIA-Expert

탄소/황 분석기

EMIA-Pro
EMIA-Pro

탄소/유황 분석기

EMIA-Step
EMIA-Step

탄소/황 분석기 (인덕션 퍼니스 타입)

ENDA-5000 Series
ENDA-5000 Series

굴뚝 배출가스 분석장치

ENDA-7000 Series
ENDA-7000 Series

굴뚝 배출가스 분석장치

IR-200
IR-200

Gas Monitor for Chamber Cleaning End Point Monitoring

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

LO-300
LO-300

레이저 스캔 오일 필름 검출기

MEXA-ONE
MEXA-ONE

배기 가스 측정 장치

OBS-ONE GS Unit
OBS-ONE GS Unit

차량 탑재형 배기가스 측정 장치

OBS-ONE IRLAM Unit
OBS-ONE IRLAM Unit

NH3/N2O 대응용 차량 탑재형 배기가스 측정 장치

OCMA-500
OCMA-500

폐수 오일 측정기

OCMA-550
OCMA-550

오일 농도 측정기

PG-300 시리즈
PG-300 시리즈

휴대용 가스분석기

VA-5000
VA-5000

범용 멀티 가스 분석기