Fluorolog-QM

Modular Research Fluorometer for Lifetime and Steady State Measurements

Modular research 등급의 형광분광계의 Fluorolog-QM 시리즈는 세계적으로 유명한 HORIBA Fluorolog의 4세대이며, 1975년 Spex Industries에 의해 첫 번째 Fluorolog가 도입되었습니다.

HORIBA 개발 및 제조 경험을 바탕으로 개발된 Fluorolog-QM은 최고 수준의 분광형광계 성능을 보유하고 있습니다.

정교하고 광학적으로 완벽한 reflective optic, 다양한 광원 및 검출기 옵션과 샘플 핸들링 액세서리와 결합되어 모든 분광형광계 중에서 가장 높은 감도와 가장 넓은 다용도성을 제공합니다.

Fluorolog-QM은 연구소의 모든 까다로운 실험 요구들을 충족시키기 위해 업계에서 가장 광범위한 옵션의 액세서리 리스트를 보유하고 있습니다.
다양한 발광 실험에 적합하도록 기능 및 성능 확장이 가능하며, Fluorlog-QM 구입 후 필요에 따라 언제든지 개선 사항과 액세서리를 시스템에 추가할 수 있습니다.

Fluorolog는 전 세계 수 천개의 대학과 연구소에서 사용되고, 수만 개의 발표 자료를 보유하고 있으며, 가장 까다로운 steady state, time-resolved, TCSPC, PLQY 및 NIR 연구에 가장 적합합니다.

4th generation from the Fluorolog series spectrofluorometers (2:18)

Spectroscopy in :60 - Up Conversion (0:60)

Spectroscopy in :60 - SSTD (0:60)

Segment: Scientific

Division: Fluorescence Spectroscopy

Manufacturing Company: HORIBA Scientific

Unique Fluorolog-QM™ Benefits

All reflective optics for perfect performance at all wavelengths
Highest guaranteed sensitivity (more than double that of the Fluorolog-3)
Excellent stray light rejection with extra-large, coma corrected, 350 mm single, or 700 mm double additive monochromators
New software for all steady state and lifetimes experiments, with many new features
Extended wavelength range from Deep UV to NIR
Up to four light source types, and six detectors, can all be connected at once, under computer control, for ultimate lab versatility
World class, plug and play, TCSPC lifetime enhancements, at speeds up to 100 MHz
NIR steady state and phosphorescence lifetime detection to 5,500 nm
Deep UV excitation down to 180 nm

For more features download the Fluorolog-QM brochure.

Optional Pulsed Laser and LED Light Sources

The following specifications are for the standard Fluorolog-QM-75-22 system.
Options and upgrades may be available upon request.

Signal-to-Noise Ratio	(>35,000:1 FSD)
Data Acquisition Rate	1,000,000 points/sec. to 1 point/1000 sec.
Inputs	4 photon counting (TTL); 4 analog (+/- 10 volts); 1 analog reference channel (+/- 10 volts); 2 TTL
Outputs	2 analog (+/- 10 volts); 2 TTL
Emission Range with standard PMT	185 nm to 900 nm (optional to 5,500 nm)
Light Source	High efficiency “ECO” friendly continuous 75 W Xenon arc lamp (Optional 450 W Xenon)
Excitation and Emission Monochromators	700 mm, triple grating, coma-aberration corrected, asymmetrical, excitation or emission optimized, Czerny-Turner design with computer controlled slits at entrance, intermediate plane and exit.
Slits	Computer controlled, continuously adjustable
Excitation Grating	1200 line/mm 300 nm blaze, (Up to two optional gratings can be ordered)
Emission Grating	1200 line/mm 400 nm blaze, (Up to two optional gratings can be ordered)
Wavelength Accuracy	+/- 0.3 nm
Minimum Step Size	0.01 nm (grating dependent)
Standard Detection	Multimode, -20 degrees Celsius cooled, 1600 Volt PMT housing; Multimode: Photon Counting, 3 analog (fast, medium, slow response), direct and Single-Shot Transient Digitizer (SSTD) mode, and Time-Correlated Single Photon Counting (TCSPC), R928P PMT standard (other PMT's available)
R928P PMT Dark Count:	10 counts per second or less
R928P PMT Maximum Linear Count Rate:	10,000,000 counts per second
System Control	Computer interface with FelixFL spectroscopy software
Lifetime Range	5 ps to seconds with appropriate time-resolved accessories

HORIBA Scientific has a policy of continuous product development, and reserves the right to amend part numbers,
descriptions and specifications without prior notice.

Selection Guide for Solid State NIR Detectors on the Fluorolog-QM

This technical note serves as a guideline to selecting the best solid state detector with the Fluorolog-QM modular research spectrofluorometer for a given series of photoluminescence experiments.