공정용 전도도 측정기 HE-200C (Low Range)

개요

  • UPW 또는 Steam Water의 연속 측정에 적합
  • 유연한 온도 보상
  • USP <645> 품질 가이드 라인에 따른 제약공정의 전도도 인라인 측정
  • 다양한 인터페이스 (2 채널 송신 출력, RS-485 호환, 3 접점 출력)

제조원 HORIBA Advanced Techno

사양

Measuring range

Cell constant

/cm

0.01

0.1

1.0

Electrical
conductivity

μS/cm

0.000 to 2.000
0.00 to 20.00

0.000 to 2.000
0.00 to 20.00
0.0 to 200.0
0 to 2,000*

0.0 to 200.0
0 to 2,000

mS/m

0.0000 to 0.2000
0.000 to 2.000

0.0000 to 0.2000
0.000 to 2.000
0.00 to 20.00
0 to 200.0*

0.00 to 20.00
0.0 to 200.0

TDS conversion

mg/L

0.00 to 2.00
0.0 to 20.0

0.0 to 20.0
0 to 200

0 to 200
0 to 2,000

Electrical conductivity measurement and TDS conversion measurement cannot be selected at same time.

Temperature

˚C

0 to 100   Resolution: 0.01˚C

* Range only applies to sanitary sensors.

Repeatability

Electrical conductivity: ±0.5% full-scale or less, TDS conversion: ±1.5% full-scale or less
Temperature: ±0.1˚C (for equivalent input)

Linearity

Electrical conductivity: ±0.5% full-scale or less, TDS conversion: ±1.5% full-scale or less
Temperature: ±0.5˚C (for equivalent input)

Transmission output

Two point 4 to 20 mA DC   Input/output insulated type   Maximum load resistance 900 Ω

Contact output

Three points   Non-voltage contact output   Relay contact, SPDT (1c)
 Contact function: R1, R2: Selectable from upper limit alarm, lower limit alarm, USP assessment, transmission output hold operation
  FAIL: Malfunction alarm
 Alarm operation: Output details: Electrical conductivity (or TDS conversion), temperature

Contact input

One point   Contact format: Open collector non-voltage a contact
 Contact function: Transmission output hold external input

Communication function

RS-485   Two wire system, Input/output insulated type (not insulated for transmission output)

Temperature compensation range

0 to 100˚C (but for 0˚C or less, 100˚C or more, extend and perform calculation)

Ambient temperature

-20 to 55˚C

Temperature compensation element

Pt 1000 (0˚C)

Calibration function

Electrical conductivity: Based on input of cell constant correction coefficient (parameter input)
TDS conversion: Conversion based on specified coefficient (0.30 to 1.00)
Temperature: One point calibration compared with reference temperature gauge

Self-diagnosis function

Sensor diagnosis error, Analyzer malfunction

Power supply

90 to 264 V AC 50/60 Hz
Power consumption 15 W or less

Construction

Outdoor installation type: IP65 protection level
Mounting method: 50A pole or wall mounted
Case: Aluminum alloy
Mount fitting/hood: SUS304

Weight

Approx. 4.5 kg

Equipment protected

CE marking, FCC rules

자료실

Specification  Of  Equipment - * Conductivity Transmitters Meter

 

MODEL

HE-200C

Range

 0 - 200 / 2,000μS/cm, 0-20mS/m 

Repeatability

±0.5% full-scale or less 

Temperature compensation range

 0-100°C

Analog Output

DC 4-20mA

Ambient temperature

 -20 ~ 55°

Power supply

90 to 264V AC 50/60 Hz , Power consumption 15W or less

Outdoor installation type

IP65 protection level

Case

Aluminum alloy

Self-diagnosis function

Sensor diagnosis error,  Analyzer malfunction

Equipment protected

 CE marking

Temperature compensation element

Pt1000(0°C)

Weight

 Approx . 4.5 kg 

Dimension

W (180) X D (129.5) X H (190)

 

 

Specification  Of  Equipment - * Conductivity Sensor

 

MODEL

 ESH-01 

Range

 0 - 200μS/㎝ 

Type

 Cable-attached type 

Cell constant

 Approx. 0.1/㎝ 

Electrode material

 Selectable from SUS316 or titanium 

Body material

 PVDF 

Measurement solution pressure

 0 ~ 0.5Mpa 

Measurement solution temperature

 0 ~ 100° 

Cable length

10cm

Attachment 

Screw in type Thread aperture : R(PT)3/4 

Dimension

H(165.5) X  Φ26

악세사리

Parts name

Parts no.

Model

Picture

Material

Conductivity Transmitters 

3200614330

HE-200C

Case : Aluminum alloy

IP65 protection level

Four-Wire Analyzer

Conductivity Sensor

3100158019

ESH-01

     

Material:Selectable from SUS316 or titanium

Body material : PVDF, Cable length : 10m

Screw in type Thread aperture :R(PT)3/4

Conductivity Sensor Holder

3030046490

EFA-30

     

Material:PVC,PVDF, SUS316, Connection pipe aperture : inlet _

Rc(PT)3/4,outlet_Rc(PT)3/4