ESH-01-C-SN Sanitary Conductivity Sensor (Ferrule Clamp type) for Low Concentrations ESH-01-C-SN
Overview
The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals and foods and beverages.
Features
- Tough structure that can withstand steam sterilization
Complies with the steam sterilization condition at 140°C / 0.6 MPa (60 minutes) - Electro-polished and mechanically polished, which satisfies the requirements for sanitary pipes.
- SUS316L, PEEK, and FKM are used as materials for contact with fluids
Manufactured by HORIBA Advanced Techno
Specifications
Model | ESH-01-C-S-SN 1.5 S |
|---|---|
Measurement principle | Alternative two-pole method |
Cell constant | Approx. 0.1 /cm |
Measurement range | 0 to 200 µS/cm (complies with the specifications of the conductivity converter) |
Measurement temperature | 0 to 100°C (complies with the specifications of the conductivity converter) |
Pressure range | 0 to 1 MPa |
Ambient operating temperature / humidity | 0 to 50°C, 95% RH or lower |
Structure | IP67 or equivalent |
Materials for contact with fluids | SUS 316L, PEEK, FKM |
Steam sterilization | 140°C / 0.6 MPa, within 60 minutes |
Connection bore diameter | IDF / ISO 1.5 S ferrule |
Weight | Approx. 0.3 kg |
Cables | 10 m Y-shaped terminal |